USER MANUAL
TIM JR 3/12B
FULL PART LIST
1
4
8
1. 12” bass drum shell x 1pc
2. 12” bass drum head x 2pcs
3. Bass drum hoop x 2pcs
4. 10” snare drum x 1pc
5. 8” tom-tom x 1pc
6. Drum throne – seat x 1pc
7. 8” cymbal x 1pc
8. Pair of drum sticks
9. Bass drum lug x 6 sets
10. Cymbal & tom-tom bracket x 1pc
11. Cymbal holder x 1pc
12. Drum tuning key x 1pc
13. Bass drum spur x 2pcs
14. Tom holder x 1pc
15. Bass drum beater x 1pc
16. Bass drum pedal x 1pc
17. Drum throne – height adjusting tube x 1pc
18. Drum throne – feet x 1pc
19. Snare drum stand x 1pc
9
5 6 7
10
11
12
13
2
14
15
16
17
18
3
19
BASS DRUM
Drum head x 2pcs
Hoop x 2pcs
Loose one side of the tension rods
1
Lug x 6 sets
Spur x 2pcs
Bass drum shell x 1pc
Place the head with logo on the front side
of the bass drum
2
Place the hoop onto the drum head
3
Clamp the drum lugs onto the hoop and insert
the rod through the positioning hole
4
Place the card board on top of the lugs
and turn the shell up side down
5 6
Place the other head on the back side of
the bass drum
Place the hoop onto the drum head Screw all tension rods to the lugs
7
8
Use the drum key to tune the tension rods
9
1
6
4
3
5
2
(NOTE: Do not fully tighten one rod at a time.
Please tune the rods in the diagonal order.
Repeat several times until the tension of each
rod is equal. The higher tension you tune, the
higher pitch it would sound)
(NOTE: DO NOT FULLY TIGHTEN)
Insert the bass drum spurs
10
CYMBAL & TOM-TOM
Tom-tom x 1pc
Cymbal & tom bracket x 1pc
Cymbal x 1pc
Tom holder x 1pc
Cymbal holder x 1pc
Insert the bracket into the adapter on the bass
drum shell
1
Connect the cymbal holder to the bracket
3
Insert the tom holder through the bracket
and connect to the tom-tom
2
Place the cymbal onto the cymbal holder
4
BASS DRUM PEDAL
Bass drum pedal x 1pc
Bass drum beater x 1pc
Connect the beater to the pedal
1
Tighten the pedal clamp
3
Clamp the pedal to the bass drum hoop
2
SNARE DRUM
Snare drum x 1pc
Snare stand feet x 1pc
Snare stand basket x 1pc
Pull open the legs and connect with the basket
arm to appropriate height Open the basket and place the snare drum
1 2
DRUM THRONE
Seat x 1pc
Height adjusting tube x 1pc
Feet x 1pc
Pull open the feet
1
Place the seat onto the tube
3
Insert the height adjusting tube to
appropriate height
2
EMD Music - 09-2017
Loading...