ASSEMBLY
Assemble the trumpet by inserting the shank on the mouthpiece
into the leadpipe. Use a gentle twist motion. The fit should be
snug, but not too tight so it can later be removed.
HOLDING YOUR TRUMPET
The following diagrams show the proper placement of your left and right hands to play the
instrument.
CARE AND MAINTENANCE
The valves and the tuning slide should be oiled once or twice per week using valve oil for
brass instruments. Perform the following steps to oil the valves and slide. To avoid mixing
valves, remove only one at a time.
1. Unscrew one of the valve caps and lift
the valve out of the valve casing. Apply
a few drops of oil to each side of the
valve surface.
2