B
UBBLE FORCE 200
User manual
ENGLISH
Version 1.1
CONTENTS
!
Warning 1
Caution 3
Please note 4
Important 4
Figure 1 Product illustration 5
Description 6
Getting Ready 7
Set Up 7
Operation 7
Troubleshooting 8
Maintenance 8
Specification 9
Appendix – A LC-3S 10
Appendix – B RC-3 11
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Instructional icons
Read the manual
Indoor use only
This symbol indicating separate collection for electrical and
electronic equipment
Warning: situations that could cause injury to yourself or
others
Caution: situations that could cause damage to your
machine or other equipment
Note: notes, usage tips, or additional information
Thank you for selecting our Bubble Force 200, you
already own the high-tech, professional Bubble
Machine! Better read the manual thoroughly
before operation, follow instruction will help you
have a smooth handling with Bubble Force 200 to
achieve the most satisfactory bubble effect, it will
also assist unit to further prolong life time as a
whole.
Warning!
Like all electronic products, Bubble Force 200
must be used with safety precautions in mind.
Fill enough bubble fluid before plugging in, empty
fluid tank when not in use or moving.
• Products for indoor use only. Keep away
from liquids. Never operate in rain or in damp
conditions.
• Use only appropriate, grounded electric
power supply for your unit. See your product
specication label for appropriate power supply.
This appliance must be earthed.
• Disconnect from electric mains power supply
when not in use, when lling the uid tank, or
when changing a fuse. Keep unit dry.
• Keep machine in at position, never put it in
tilted place.
• Before moving bubble machine, always drain
bubble uid into the exterior tank to avoid
spilling.
1
• Without user-serviceable parts in the package,
please contact your local agent or qualified
technician for servicing.
• Without changeable structure by non-qualied
user, please do not open the rear cover or
have any change at will, otherwise, it may
cause accident!
• Bubble machine is for adult use. Keep out of
reach of children. Never leave the unit running
unattended.
• Keep case closed while operating. Put bubble
machine in drafty place, do not insert objects
into air vents. Allow 20cm space or above
around the machine for proper ventilation.
• Keep bubble machine away from ames and
ammable items. Never aim the mouth at open
ames or sparks. Use only high quality bubble
uid. Never put ammable substances into the
tank.
• Machine must cool down before cleaning,
servicing or storing.
• Never put any ammable material (lipid, gas,
perfume etc.) into the tank, read the user
manual thoroughly before operation.
• Better use our high quality bubble uid to
maximize the bubble effect.
• Keep sufcient bubble uid in tank, but please
do not overfill bubble machine.
• If any abnormal running occurs, stop it
immediately, empty the uid, and bring the
done up unit (recommend original box) to
your agent or dealer for servicing. Make sure
2
all uid is empty from the tank before moving
or shipping.
• Never drink bubble uid. If ingested, call a
doctor immediately. If uid contacts eyes or
skin, rinse skin thoroughly with water.
• Read user manual instructions thoroughly
before operating. Follow the instruction. Never
remove warning or informative labels from the
unit.
Caution!
!
There are no user serviceable parts inside this
unit. Do not attempt any repairs yourself, doing
so will void your manufactures warranty. In the
unlikely event your unit may require service
please contact your local dealer.
Pay attention to all warning labels and
instructions printed on the exterior.
Do not overfill your bubble machine. Overfilling
will cause the unit to leak.
Important:
work, it is suggested to empty the bubble liquid
immediately and clean the tank with water.
Please note that the bubble liquid inside the
bubble machinewillget sticky after being
exposed to the air for a period of time, which
will result failure ofbubble blowing. Under
such situation, please dilute the bubble liquid
with water to its proper concentration for
use. Bubbleblowing will berevitalized then.
When the bubble machine is not at
3
Please note:
Specifications and improvements in the design of
this unit and this manual are subject to change
without any prior written notice.
Important
The wires in this mains lead are colored in
accordance with the following code.
230V, 240V .........................................................
Green and Yellow – Earthed (E)
Blue – Neutral (N)
Brown – Live (L)
Warning: This appliance must be earthed.
100V, 120V .........................................................
Green and Yellow – Earthed (E)
White – Neutral (N)
Black – Live (L)
Warning: This appliance must be earthed.
4
Figure 1 Product illustration
A
E FDC
G
B
H
A. Handle B. Bubble Fluid Tank
C. Bubble Switch D. Control Socket Connection
E. Fuse Holder F. Electric Power Cord
G. Fan H. Picket line of Overll
5
Description
Bubble Force 200
Equipped with four Bubble Wheels, constantly produces volumes
1.
of firm bubbles.
2. The bottom base of the one-piece plastic case is completely sealed,
so that the liquid will not easily spill when the machine is being
moving.
3. Its big mouth blows strongly volumes of bubbles to the air, and
also recycles the bubble liquid at the same to avoid liquid leaking.
4. BF-200 can work with wire controller (LC-3S) and wireless
controller (RC-3). Without doubt, BF-200 is the best helper for
creating the best activity atmosphere.
5. Easy for bubble liquid supply plus the handle for direct holding
make absolutely user-friendly in different kinds of locations,
celebration parties, dancing parties and shows.
Getting Ready
All products are thoroughly tested at the factory and shipped in
perfect condition. If damage has occurred during shipping, or if
components are missing, please contact your local dealer immediately.
Your package should include:
1.One Bubble Force 200
2.One LC-3S line controller or one RC-3 wireless controller
3.One product user manual
6
Set Up
1. Open the shipping carton and carefully remove the unit from the
shipping carton.
2. Be sure to remove packing material from around the bubble
machine.
3. Set the bubble machine on a dry, at surface.
4.
Fill the bubble uid to the bubble machine, DO NOT OVERFILL.
Use only high quality uid.
5. Firmly attach the remote control mechanism to socket (D of gure1)
on the back of the unit.
6. Plug mains power cord from the bubble machine into appropriate
power supply socket.
7. Refer to your controller manual for operation details.
(Appendix A, B)
Operation
1. Use bubble switch (C of figure 1) to switch unit’s ON/OFF, switch
“ON” to blows volumes of bubbles to the air, and “OFF” to stop.
2. Use controller LC-3S or RC-3 to operate Bubble Force 200.
• Firmly attach the remote control mechanism to socket
(Figure 1-D) on the back of the unit;
• Make sure the bubble switch is “OFF” (Figure 1-C);
• Plug mains power cord from the bubble machine into
appropriate power supply socket;
• Refer to your controller manual for operation details.
(Appendix A and B).
7
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a
solution is found. Once the unit operates properly, do not carry out
following steps. If the problem persists, refer servicing to a qualied
technician.
Power Connected but No Bubble Is Blew
1. Check the power supply. Plug the unit into grounded electric power
supply socket with proper voltage.
2. Check your controller if in correct connection, test the battery if
power enough for wireless controller.
3. Disconnect bubble machine from electric power supply. Replace
fuse with one of the same type.
Maintenance
Before doing maintenance, please make sure that the power is cut,the
power cord is unplugged.
The maintenance must be done by qualified person.
1. For cleaning the interior of the machine and the hole of bubble-
blowing, unscrew the two screws on each side of the back panel,
two screws on front cover, and two screws on upper cover.
Dismantle the module and disconnect the 2-pin motor wires.
2. Clean the fan with cloth.
3. Clean the plastic cover with cloth.
4. After cleaning, put the module back by reverse direction according
to the instruction of point 1, and be sure that the motor wires are
well connected.
Important: When the bubble machine is not at work, it is suggested
to empty the bubble liquid immediately and clean the tank with water.
Please note that the bubble liquid inside the bubble machinewillget
sticky after being exposed to the air for a period of time, which will
result failure ofbubble blowing. Under such situation, please dilute
the bubble liquid with water to its proper concentration for use.
Bubbleblowing will berevitalized then.
8
Specification
Name
Model
Tank (Liter) 2L
Fluid Consumption Rate 22ml/min (100V,120V); 16ml/min (230V,240V);
Power Consumption 37W (100V,120V), 14W (230V, 240V)
Fuse (100V, 120V) T1A/250V
Fuse (230V, 240V) T1A/250V
Voltage 100V 50/60Hz; 120V/60Hz; 230V,240V/50Hz
Dimensions 359x266x278 mm
Weight 3.7 kg
Controller included LC-3S
Optional Controller RC-3, LC-3
* Voltage is preset at the factory and may not be changed.
359mm 266mm
Bubble Force 200
BF-200
278mm
9
Appendix – A LC-3S
Wired Remote Control Operation:
The Bubble Force 200 is designed with 3m wired remote controller
with JY cable. Once the bubble machine is plugged, the red LED on
this remote controller will light up. When switch the button (B) ON,
the green LED lights up, and indicating the bubble machine blows
volumes of bubbles to the air.
Cable Length:3m
Connector: JY
Function: ON/OFF
Dimension (LxWxH): 90 x 50 x 24 mm
Weight: 0.28 kg
A
C
B
D
A- JY cable B- Button
C- Green LED (blow) D- Red LED (power)
10
Appendix – B RC-3
Wireless Remote Control Operation:
The Bubble Force 200 is designed with wireless remote controller.
Workable remote distance possibly extends to 25 meters. Get RC-3
properly connected, press down any button on the remote to start
blowing, unhand the button to stop emission.
Operative Distance: 25 meters
Connector: JY
Function: Wireless ON/OFF
Dimension (LxWxH): 90 x 50 x 24 mm
Weight: 0.1kg
A
C
A- JY cable B- Remote control
C- Radio receiver
B
11
Bubble Force 200
Every information is subject to change without prior notice
Save this instruction properly
Loading...