How it Works
ST
Loading...
TDR016V1
User Manual
13 pgs248.17 Kb0
Table of contents
Loading...

ST TDR016V1 User Manual

Download
Features
■ Excellent thermal stability
■ Frequency: 155 - 165 MHz
■ Output power: 30 W
■ Power gain: 14.7 ± 0.3 dB
■ Efficiency: 60% - 72%
■ Load mismatch: 20:1
■ Beo free amplifier
Application
■ Marine radio
STEVAL-TDR016V1
RF power amplifier using 1 x PD55015E
N-channel enhancement-mode lateral MOSFETs
Mechanical specification:
L = 60 mm, W = 30 mm
Description
The STEVAL-TDR016V1 is a common source N­channel enhancement-mode lateral field effect RF power amplifier designed for VHF marine radio application.

Table 1. Device summary

Order code
STEVAL-TDR016V1
September 2010 Doc ID 18030 Rev 1 1/13
www.st.com
13
Contents STEVAL-TDR016V1
Contents
1 Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Typical performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 Circuit layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Mounting indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2/13 Doc ID 18030 Rev 1
STEVAL-TDR016V1 Electrical data

1 Electrical data

1.1 Maximum ratings

Table 2. Absolute maximum ratings

Symbol Parameter Value Unit
V
P
T
CASE
DD
I
D
DISS
T
A
Supply voltage 24 V
Drain current 3 A
Power dissipation 25 W
Operating case temperature -20 to +85 °C
Max. ambient temperature 55 °C

2 Electrical characteristics

TA = +25 oC, VDD = 20V, I

Table 3. Electrical specification

Symbol Test conditions Min. Typ. Max. Unit
Freq Frequency range 155 165 MHz
P
OUT
Gain @ P
ND @ P
Gain
Flatness
@ P
= 30W 14.7 dB
OUT
= 30W 60 %
OUT
= 30W ± 0.3 dB
OUT
= 150 mA
DQ
30 W
H2 2ND Harmonic @ P
RD
H3 3
Harmonic @ P
= 30 W -29 -25 dBc
OUT
= 30 W -52 -50 dBc
OUT
VSWR Load mismatch all phases @ P
Doc ID 18030 Rev 1 3/13
= 30 W 20:1
OUT
Typical performance STEVAL-TDR016V1

3 Typical performance

Figure 1. P
35
30
25
20
Pout (W)
15
10
Figure 3. Gain vs P
Gp (dB)
vs pin and frequency
OUT
@ Vdd = 20 V
f = 160 MHz
f = 165 MHz
f = 155 MHz
5
0
0,0 0,2 0,4 0,6 0,8 1,0 1,2
Pin (mW)
Pin(W)
and frequency @
OUT
Vdd = 20 V Idq = 150 mA
Vdd= 20 V
20
19
18
17
16
15
14
13
12
11
10
0 5 10 15 20 25 30 35
f = 165 MHz
f = 155 MHz
Pout (W)
f = 160 MHz
Vdd = 20 V Idq = 150 mA
Figure 2. Efficiency vs
P
and frequency @ Vdd = 20 V
OUT
90
80
70
60
50
Nd (%)
40
30
20
10
0
0 5 10 15 20 25 30 35
f = 160 MHz
Pout (W)
f = 165 MHz
f = 155 MHz
Vdd = 20 V Idq = 150 mA
Figure 4. Harmonics vs frequency
@ Vdd= 20 V
-20
-25
-30
-35
-40
-45
-50
Harmonics Level (dB)
-55
-60
-65
-70 150 155 160 165 170
H2
H3
f (MH z)
Vdd = 20 V Idq = 150 mA Pout = 30 W
4/13 Doc ID 18030 Rev 1
STEVAL-TDR016V1 Typical performance
Figure 5. P
36
32
28
24
20
16
Pout (W)
12
8
4
0
4 6 8 10121416182022
Figure 7. P
18
16
14
12
10
8
Pout (W)
6
4
2
0
0,0 0,2 0,4 0,6 0,8 1,0
and current vs drain voltage
OUT
@ f = 165 MHz
ID
Pout
Vdd (V)
vs pin and frequency
OUT
f = 165 MHz Vdd = 20 V Idq = 150 mA Pin = 1.5 W
@ Vdd = 13.6 V
f = 160 MHzf = 155 MHz
f = 165 MHz
Vdd = 13.6 V Idq = 150 mA
Pin (W)
3,2
2,8
2,4
2,0
1,6
ID (A)
1,2
0,8
0,4
0,0
Figure 6. P
and current vs drain voltage
OUT
@ f = 155 MHz
36
32
28
24
20
16
Pout (W)
12
8
4
0
4 6 8 10121416182022
ID
Pout
Vdd (V)
Figure 8. Efficiency vs P
Vdd = 13.6 V
80
70
60
50
40
Nd (%)
30
20
10
0
024681012141618
f = 160 MHz
f = 165 MHz
f = 155 MHz
Pout (W)
f = 155 MHz Vdd = 20 V Idq = 150 mA Pin = 1.5 W
and frequency @
OUT
Vdd = 13.6 V Idq = 150 mA
3,2
2,8
2,4
2,0
1,6
ID (A)
1,2
0,8
0,4
0,0
Doc ID 18030 Rev 1 5/13
Typical performance STEVAL-TDR016V1
Figure 9. Gain vs P
20
18
16
14
Gp (dB)
12
10
Vdd= 13.6 V
8
6
0246810121416
and frequency @
OUT
f = 160 MHz
f = 165 MHz
Vdd = 13.6 V Idq = 150 mA
Pout (W)
f = 155 MHz
Figure 10. Harmonics vs frequency
@ Vdd = 13.6 V
-20
-30
H2
-40
-50
Harmonics Level (dB)
-60
-70 150 155 160 165 170
H3
f (MHz)
Vdd = 13.6 V Idq = 150 mA
6/13 Doc ID 18030 Rev 1
STEVAL-TDR016V1 Circuit layout

4 Circuit layout

Figure 11. Circuit layout

Doc ID 18030 Rev 1 7/13
Mounting indications STEVAL-TDR016V1

5 Mounting indications

Figure 12. PowerSO-10 mounting indications
8/13 Doc ID 18030 Rev 1
STEVAL-TDR016V1 Package mechanical data

6 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
®
packages, depending on their level of environmental compliance. ECOPACK®
Doc ID 18030 Rev 1 9/13
Package mechanical data STEVAL-TDR016V1

Table 4. PowerSO-10RF formed lead (Gull wing) mechanical data

Dim. mm. Inch
Min. Typ. Max. Min. Typ. Max.
A1 0 0.05 0.1 0. 0.0019 0.0038
A2 3.4 3.5 3.6 0.134 0.137 0.142
A3 1.2 1.3 1.4 0.046 0.05 0.054
A4 0.15 0.2 0.25 0.005 0.007 0.009
a0.2 0.007
b 5.4 5.53 5.65 0.212 0.217 0.221
c 0.23 0.27 0.32 0.008 0.01 0.012
D 9.4 9.5 9.6 0.370 0.374 0.377
D1 7.4 7.5 7.6 0.290 0.295 0.298
E 13.85 14.1 14.35 0.544 0.555 0.565
E1 9.3 9.4 9.5 0.365 0.37 0.375
E2 7.3 7.4 7.5 0.286 0.292 0.294
E3 5.9 6.1 6.3 0.231 0.24 0.247
F0.5 0.019
G1.2 0.047
L 0.8 1 1.1 0.030 0.039 0.042
R1 0.25 0.01
R2 0.8 0.031
T 2 deg 5 deg 8 deg 2 deg 5 deg 8 deg
T1 6 deg 6 deg
T2 10 deg 10 deg
Note: Resin protrusions not included (max value: 0.15 mm per side)
10/13 Doc ID 18030 Rev 1
STEVAL-TDR016V1 Package mechanical data

Figure 13. Package dimensions

Critical dimensions:
- Stand-off (A1)
- Overall width (L)
Figure 14. PowerSO-10RF tape and reel
Doc ID 18030 Rev 1 11/13
Revision history STEVAL-TDR016V1

7 Revision history

Table 5. Document revision history

Date Revision Changes
27-Sep-2010 1 Initial release.
12/13 Doc ID 18030 Rev 1
STEVAL-TDR016V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 18030 Rev 1 13/13
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use