ST T1035H, T1050H User Manual

T1035H, T1050H

High temperature 10 A Snubberless™ Triacs

Features

■ Medium current Triac

■ 150 °C max. T

■ Low thermal resistance with clip bonding

■ Very high 3 quadrant commutation capability

■ Packages are RoHS (2002/95/EC) compliant

■ UL certified (ref. file E81734)

turn-off commutation

j

Applications

Especially designed to operate in high power
density or universal motor applications such as
vacuum cleaner and washing machine drum
motor, these 10 A Triacs provide a very high
switching capability up to junction temperatures of
150 °C.

The heatsink can be reduced, compared to
traditional Triacs, according to the high
performance at given junction temperatures.

Description

Available in through-hole or surface mount
packages, the T1035H and T1050H Triacs series
are suitable for general purpose mains power ac
switching.

By using an internal ceramic pad, the T10xxH-6I
provides voltage insulation (rated at 2500 V rms).

A2

G

A2

G

A2

A1

A2

A1

D2PAK

T10xxH-6G

A2

A1

TO-220AB Insulated

T10xxH-6I

Table 1. Device summary

Symbol Value Unit

I

T(RMS)

V

DRM/VRRM

I

GT

10 A

600 V

35 or 50 mA

A1

TO-220AB

T10xxH-6T

G

G

A2

TM: Snubberless is a trademark of STMicroelectronics

September 2011 Doc ID 13565 Rev 2 1/10

www.st.com

10

Characteristics T1035H, T1050H

1 Characteristics

Table 2. Absolute maximum ratings

Symbol Parameter Value Unit

2

D

I

T(RMS)

I

TSM

²

tI

I

dI/dt

V

DSM/VRSM

I

GM

P

G(AV)

T

stg

T

Table 3. Electrical characteristics (Tj = 25 °C, unless otherwise specified)

On-state rms current (full sine wave)

Non repetitive surge peak on-state
current (full cycle, Tj initial = 25 °C)

²

t Value for fusing tp = 10 ms 66 A²s

Critical rate of rise of on-state current I
= 2 x IGT , tr ≤ 100 ns

Non repetitive surge peak off-state
voltage

Peak gate current tp = 20 µs Tj = 150 °C 4 A

Average gate power dissipation Tj = 150 °C 1 W

Storage junction temperature range
Operating junction temperature range

j

PAK, TO-220AB Tc = 135 °C

TO-220AB Ins T

= 125 °C

c

F = 50 Hz t = 20 ms 100

F = 60 Hz t = 16.7 ms 105

G

F = 120 Hz T

= 10 ms Tj = 25 °C

t

p

= 150 °C 50 A/µs

j

10 A

V

DRM/VRRM

+ 100

- 40 to + 150

- 40 to + 150

Value

Symbol Test Conditions Quadrant

T1035H T1050H

(1)

I

GT

V

GT

V

GD

(2)

I

H

I

L

dV/dt

(dI/dt)c

1. minimum IGT is guaranted at 20% of IGT max.

2. for both polarities of A2 referenced to A1.

VD = 12 V, RL = 33 Ω

VD = V

, RL = 3.3 kΩ I - II - III MIN. 0.15 V

DRM

IT = 500 mA MAX. 35 75 mA

IG = 1.2 I

(2)

VD = 67% V

(2)

Without snubber, Tj = 150 °C MIN. 13 18 A/ms

GT

gate open, Tj = 150 °C MIN. 1000 1500 V/µs

DRM,

I - II - III MAX. 35 50 mA

I - II - III MAX. 1.0 V

I - III

50 90

MAX.

II 80 110

A

V

°C

Unit

mA

2/10 Doc ID 13565 Rev 2

T1035H, T1050H Characteristics

Table 4. Static characteristics

Symbol Test Conditions Value Unit

(1)

V

T

V

t0

R

d

ITM = 14 A, tp = 380 µs Tj = 25 °C MAX. 1.5 V

(1)

Threshold voltage Tj = 150 °C MAX. 0.80 V

(1)

Dynamic resistance Tj = 150 °C MAX. 34 mΩ

Tj = 25 °C MAX. 5 µA

V

= V

V

DRM

D/VR

D/VR

I

DRM

(2)

I

RRM

1. for both polarities of A2 referenced to A1.

= 380 µs

2. t

p

Table 5. Thermal resistance

RRM

= 150 °C MAX. 3.6

T

j

= 400 V (at peak mains voltage) Tj = 150 °C MAX. 3.0

= 200 V (at peak mains voltage) Tj = 150 °C MAX. 2.5

Symbol Parameter Value Unit

2

D

R

R

th(j-c)

th(j-a)

Junction to case (AC)

Junction to ambient

S = 1 cm

2

PAK / TO-220AB 1.45

TO-220AB Ins 3.4

D2PA K 4 5

TO-220AB / TO-220AB Ins 60

mAV

°C/W

Doc ID 13565 Rev 2 3/10

Characteristics T1035H, T1050H

Figure 1. Maximum power dissipation versus

on-state rms current (full cycle)

P(W)

11

α=180 °

10

9

8

7

6

5

4

3

2

1

0

012345678910

I

T(RMS)

(A)

180°

Figure 3. On-state rms current versus

ambient temperature

I

(A)

T(RMS)

4.5

4.0

3.5

Epoxy printed circuit board FR4,

copper thickness = 35 µm

α=180 °

D²PAK

S

CU

=1 cm²

3.0

2.5

2.0

1.5

1.0

0.5

0.0

T

(°C)

amb

0 25 50 75 100 125 150

Figure 5. On-state characteristics

(maximum values)

ITM(A)

100

Tj=150 °C

10

1

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

Tj=25 °C

VTM(V)

Tjmax. :

V

t0

= 34 mΩ

R

d

= 0.80 V

Figure 2. On-state rms current versus case

temperature (full cycle)

I

(A)

T(RMS)

12

10

TO-220AB

8

TO-220AB/D²PAK

Insulated

6

4

2

α=180 °

TC(°C)

0

0 25 50 75 100 125 150

Figure 4. Variation of thermal impedance

versus pulse duration

Zth(°C/W)

1.0E+02

1.0E+01

1.0E+00

1.0E-01

1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03

tP(s)

Z

th(j-a)

Z

th(j-c)

Figure 6. Surge peak on-state current versus

number of cycles

I

(A)

TSM

110

100

90

80

Non repetitive
T

initial=25 °C

j

70

60

50

40

Repetitive
T

=125 °C

c

30

20

10

0

Number of cycles

1 10 100 1000

t=20ms

One cycle

4/10 Doc ID 13565 Rev 2

T1035H, T1050H Characteristics

0.0

0.10

00

00

Figure 7. Non-repetitive surge peak on-state

current for a sinusoidal pulse with

Figure 8. Relative variation of IGT,IH, IL vs

junction temperature
(typical values)

I

(A), I²t (A²s)

TSM

10000

dI/dt limitation: 50 A/µs

1000

100

width t < 10 ms and corresponding value of I t

10

p

1

Tj initial=25 °C

I

TSM

I²t

2

tP(ms)

1.

10.

IGT,IH,IL[Tj]/IGT,IH,IL[Tj=25°C]

2.5

2.0

1.5

1.0

0.5

0.0

I

GT

IH& I

L

Tj(°C)

-40 -20 0 20 40 60 80 100 120 140 160

Figure 9. Relative variation of critical rate of

decrease of main current (dI/dt)c
versus reapplied (dV/dt)c

(dI/dt)c[(dV/dt)c] / Specified (dI /dt)

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.0

0.1 1.0 10.0 100.0

c

typical values

(dV/dt)C(V/µs)

Figure 11. Leakage current versus junction

temperature for different values of
blocking voltage (typical values)

I

(µA)

DRM/IRRM

1.0E+04

V

=600 VV

=600 V

DRM=VRRM

1.0E+03

V

=400 VV

=400 V

DRM=VRRM

1.0E+02

1.0E+01

1.0E+00

1.0E-01

V

DRM=VRRM

DRM=VRRM

50 75 100 125 150

=200 VV

=200 V

DRM=VRRM

DRM=VRRM

Tj(°C)

Figure 10. Relative variation of critical rate of

decrease of main current versus
junction temperature

(dI/dt)c[Tj] / (dI/dt)c[Tj=150°C]

8

7

6

5

4

3

2

1

0

25 50 75 100 125 150

Tj(°C)

Figure 12. Variation of thermal resistance

junction to ambient versus copper
surface under tab

R

(°C/W)

th(j-a)

80

70

60

50

40

30

20

10

0

0 5 10 15 20 25 30 35 40

Epoxy printed circuit board FR4,

copper thickness = 35 µm

SCU(cm²)

D²PAK

Doc ID 13565 Rev 2 5/10

Ordering information scheme T1035H, T1050H

2 Ordering information scheme

Figure 13. Ordering information scheme

T 10 xx H - 6 y -TR

Triac series
Current

10 = 10 A

Sensitivity

35 = 35 mA
50 = 50 mA

High temperature
Voltage

6 = 600 V

Package

G = D2PA K
T = TO-220AB
I = TO-220AB Ins

Packing

Blank = Tube (D2PAK, TO-220AB)

-TR = Tape and reel (D2PAK)

6/10 Doc ID 13565 Rev 2

T1035H, T1050H Package information

D

3 Package information

● Epoxy meets UL94, V0

● Recommended torque 0.4 to 0.6 N·m

In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
specifications, grade definitions and product status are available at: www.st.com
ECOPACK

Table 6. D

®

packages, depending on their level of environmental compliance. ECOPACK®

®

is an ST trademark.

2

PAK dimensions

.

Dimensions

Ref.

Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 4.30 4.60 0.169 0.181

A

L2

E

C2

A1 2.49 2.69 0.098 0.106

A2 0.03 0.23 0.001 0.009

B 0.70 0.93 0.027 0.037

L

L3

G

B2

B

A1

2mm min.
FLAT ZONE

C

R

A2

V2

B2 1.25 1.40 0.048 0.055

C 0.45 0.60 0.017 0.024

C2 1.21 1.36 0.047 0.054

D 8.95 9.35 0.352 0.368

E 10.00 10.28 0.393 0.405

G 4.88 5.28 0.192 0.208

L 15.00 15.85 0.590 0.624

L2 1.27 1.40 0.050 0.055

L3 1.40 1.75 0.055 0.069

Figure 14. Footprint (dimensions in mm)

16.90

10.30

8.90

Doc ID 13565 Rev 2 7/10

R 0.40 0.016

V2 0° 8° 0° 8°

5.08

1.30

3.70

Package information T1035H, T1050H

Table 7. TO-220AB and TO-220AB Ins dimensions

Dimensions

Ref.

Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 15.20 15.90 0.598 0.625

a1 3.75 0.147

B

Ø I

C

b2

a2 13.00 14.00 0.511 0.551

B 10.00 10.40 0.393 0.409

L

A

I4

l3

a1

l2

b1

e

a2

F

b1 0.61 0.88 0.024 0.034

b2 1.23 1.32 0.048 0.051

C 4.40 4.60 0.173 0.181

c2

c1 0.49 0.70 0.019 0.027

c2 2.40 2.72 0.094 0.107

e 2.40 2.70 0.094 0.106

M

F 6.20 6.60 0.244 0.259

c1

ØI 3.75 3.85 0.147 0.151

I4 15.80 16.40 16.80 0.622 0.646 0.661

L 2.65 2.95 0.104 0.116

l2 1.14 1.70 0.044 0.066

l3 1.14 1.70 0.044 0.066

M2.60 0.102

8/10 Doc ID 13565 Rev 2

T1035H, T1050H Ordering information

4 Ordering information

Table 8. Ordering information

Order code Marking Package Weight Base qty Delivery mode

2

T10xxH-6G T10xxH 6G D

T10xxH-6G-TR T10xxH 6G D

PAK 1.5 g 50 Tube

2

PAK 1.5 g 1000 Tape and reel

T10xxH-6T T10xxH 6T TO-220AB 2.3 g 50 Tube

T10xxH-6I T10xxH 6I TO-220AB Ins 2.3 g 50 Tube

5 Revision history

Table 9. Document revision history

Date Revision Changes

17-Apr-2007 1 First issue

20-Sep-2011 2 Updated: Features, Description and Figure 2.

Doc ID 13565 Rev 2 9/10

T1035H, T1050H

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2011 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

10/10 Doc ID 13565 Rev 2