Features
■ Three 5 V power supply options: power jack,
USB connection or daughter board
■ Real-time clock (RTC)
■ Audio play and record
■ 3 RS232 connectors, one with hardware flow
control
■ USB 2.0 compliant with full speed (12 Mb/s)
data transmission
■ CAN 2.0A/B connection
■ Inductor motor control connector with 6 PWM
output and emergency stop
■ Debug and programming support via 20-pin
JTAG connector
■ Dot-matrix LCD module
■ Joystick with 4-direction control and selector
■ Extension connectors for daughter board or
wrapping board
STR750-EVAL
STR750-EVAL evaluation board
Data brief
Description
The STR750 evaluation board (STR750-EVAL) is
a complete development platform for
STMicroelectronics’ ARM® core-based STR75xF
microcontrollers. Based on a cost-effective,
flexible and open design, it allows easy
demonstration of STR75xF capabilities and
enables rapid evaluation of the microcontroller’s
peripherals and other features.
It includes the high performance STR750F
The STR750-EVAL features a complete range of
connectors and hardware features for developing
applications based on STR75xF peripherals
including motor control, USB and RS232
connectors, microphone, speaker, joystick, and
LCD display.
The STR750-EVAL uses a JTAG standard
interface to connect to your host PC via any of a
range of in-circuit emulators (ICE) for ARM corebased microcontrollers.
microcontroller, which is based on the
ARM7TDMI-S core and includes USB 2.0
compliant port with full speed data transmission,
CAN 2.0A/B compliant interface, 3 UART
channels, internal Flash and internal SRAM
memory.
October 2010 Doc ID 18104 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Ordering information STR750-EVAL
1 Ordering information
Table 1. Device summary
Order code Reference
STR750-EVAL STR750-EVAL evaluation board
2/4 Doc ID 18104 Rev 1
STR750-EVAL Revision history
2 Revision history
Table 2. Document revision history
Date Revision Changes
25-Oct-2010 1 Initial release.
Doc ID 18104 Rev 1 3/4
STR750-EVAL
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4 Doc ID 18104 Rev 1
Loading...