STDP6018, STDP6026,
STDP6036, STDP6028, STDP6038
Triple input LCD controller for WSXGA+ and WUXGA applications
Data brief
Features
■Programmable zoom and shrink scaling
■DisplayPort 1.1a compliant receiver – four-lane DisplayPort input
■Ultra-Reliable DVI® receiver (165 MHz) (STDP6026/STDP6036)
■Triple-channel (10-bit) ADC (205 MHz) and PLL
■Faroudja RealColor® color processing:
■Intel x86-compatible microcontroller with external SPI ROM interface
■12-bit panel gamma correction and high-quality dithering for 8-bit and 6-bit panel interface
■DDC controller for host interface purposes
■PWM signals for backlight, audio volume control, etc.
■Energy Spectrum Management® (ESM®)
■Package: 128-pin PQFP
–Image enhancement
–12-bit processing
–Deep color support
–xvYCC color space support
■Dual channel 8-bit LVDS output
■HDMI 1.3 receiver integrated with I2S (L/R channel) or SPDIF audio output ports (STDP6028/STDP6038)
Applications
■WSXGA+/FHD/WUXGA LCD monitors with VGA, DP, HDMI 1.3, or DVI inputs (supports wide-gamut panels and high color fidelity applications)
SPI |
|
|
Flash |
|
Flash |
|
|
Crystal |
|
|
|
|
|
SPI |
|
|
Main Link |
|
LCD Panel |
|
|
|
|
DP |
AUX CH |
|
|
|
HPD_out |
|
|
DP Tx |
|
LVDS |
|
Data, Control |
|
|
|
|
STDP60xx |
|
|
DP Tx |
DDC |
|
|
HDMI |
Clock |
|
|
|
|
|
|
|
|
I2S / SPDIF |
Audio |
VGA/ |
Video |
|
DAC / Amp |
|
|
||
YPrPb |
Syncs |
|
|
|
|
Keypad / |
Speakers |
|
|
LED |
|
|
|
|
January 2011 |
Doc ID 15270 Rev 3 |
1/7 |
For further information contact your local STMicroelectronics sales office. |
www.st.com |
Description |
STDP6018, STDP6026, STDP6036, STDP6028, STDP6038 |
|
|
STDP60xx is an all-in-one LCD monitor controller with analog (RGB), DisplayPort 1.1a, DVI (STDP6026/STDP6036), and HDMI 1.3a (STDP6028/STDP6038) inputs and supporting resolutions up to WUXGA in a 128 PQFP package. The STDP60xx leverages STMicroelectronics’ patented advanced image-processing technology, as well as a proven integrated ADC/PLL and an Ultra-Reliable DVI compliant digital receiver (STDP6026/STDP6036) to deliver a high-quality solution for mainstream dual input monitors.
The output section contains a dual channel 8-bit LVDS transmitter for direct interfacing of commercially available LVDS LCD panel module. In addition, STDP60xx includes an integrated x86 OCM with SPI compatible interface, advanced color control features, a multicolor proportional font OSD engine, and a number of system I/O components.
Along with the high quality and reliability, STDP60xx also provides a very low cost system design by reducing the number of system components by deploying on a small two-layer PCB.
Dual LVDS
DisplayPort
1.1a
HDMI |
STDP60xx |
|
|
1.3 |
|
|
|
VGA |
I2S |
Audio |
|
Amp |
|||
|
SPDIF |
||
|
|
||
|
Serial Flash |
|
2/7 |
Doc ID 15270 Rev 3 |
STDP6018, STDP6026, STDP6036, STDP6028, STDP6038 |
Feature attributes |
|
|
2Feature attributes
●Advanced color controls
–TV style color controls including hue and saturation
–Faroudja RealColor provides six axis color controls, flesh-tone adjustment, gray guarding and image enhancement
–Multiple-bin ACC extends the dynamic range of the display
●Analog RGB input
–205 MHz 10-bit ADC supports analog input up to UXGA @ 75
–Composite-sync and Sync-on-Green (SOG) support
–Instant Auto™ for automatic phase and clock adjustment
●Ultra-Reliable DVI input (STDP6026/STDP6036)
–Operating speed 165 MHz (up to UXGA 60 Hz)
–Direct connect to all DVI-compliant digital transmitters
–High-bandwidth Digital Content Protection (HDCP)
●DisplayPort input
–4-lane DisplayPort 1.1a compliant Rx
–One auxiliary channel
–I2S (up to 8 channels) or SPDIF audio output ports
●HMDI 1.3 compliant Rx (STDP6028/STDP6038)
–Supports resolutions up to 1080p/WUXGA
–Deep color and wide gamut support: 12-bit HDMI input at YCC 4:4:4
–Backwards compatible with DVI
–Supports integrated HDCP
–Supports audio
●Intelligent image processing™
–Programmable coefficients for user sharpness control
–Real Recovery™ function provides full color recovery image for refresh rates higher than those supported by the LCD panel
●x86 on-chip microcontroller
–High-performance x86 MCU with on-chip RAM and ROM
–Unified memory architecture simplifies chip programming
–Three DDC2Bi ports on VGA, HDMI/DVI and DP/HDMI/DVI inputs with DMA buffer to internal RAM. DDC buses can function as GPIO
–Slow clock mode for 50mW sleep mode power consumption
●On-chip OSD controller
–1, 2 and 4-bit per pixel character cells
–Blinking, transparency and blending
–Supports two independent OSD menu rectangles
Doc ID 15270 Rev 3 |
3/7 |