ST ST7MDT20-T64 User Manual

ST7MDT20-T64/DVP

TQFP64 (14x14) Connection Kit for ST7MDT20-DVP3

DATA BRIEF

The TQFP64 (14x14) Connection Kit (ST7

MDT20-T64/DVP) provides the hardware you
need to connect your ST7MDT20-DVP3 emulator
to your application when debugging applications
for ST7 microcontrollers in the TQFP64 (14x14)
package.

Connection Kit Contents

■ One additional 50-pin flat cable required for

connection between emulator and the adapter.

■ TQFP80/64/44 adapter (DB530) – Allows the

connection of your ST7MDT20-DVP3 emulator
to your application board in place of your ST7.

■ TQFP64 (14x14) device adapter (DB543) –

Adapts the emulator connection to the package
of your ST7.

■ CAB TQFP64 (14x14) socket and cover

(CAB 3303262 and CAB 3303307) – solders to
your application board to allow connection of
the emulator or installation of your ST7.

For more information...

Figure 2. TQFP64 device adapter (DB543)

Figure 3. Connection to application board

Orientation

3. Plug flat cables into the

corresponding connectors
J1 and J2 on the adapter

Indicators

■ ST7-DVP3 User Manual – Information

common to all DVP3 series emulators

■ ST7MDT20-DVP3 Probe User Guide –

Information specific to ST7MDT20-DVP3

Figure 1. Flat cable and adapter

TQFP 80/64/44 Adapter (DB530)

Additional 50-pin flat cable

October 2005 1/3

4. Plug the W1 and W2

connectors on the adapter
into the corresponding
connectors on the device
adapter.

2. Align pin 1 indicators,

then secure the device
adapter to the socket.

1. Solder socket to

application board.

Pin 1

Indicators

Rev 1

www.st.com

3

ST7MDT20-T64/DVP

Revision history

Date Revision Changes

10-October-2005 1 Initial release.

2/3