ST ST7MDT20-T32 User Manual

ST7MDT20-T32/DVP

TQFP32 (7x7) Connection Kit for ST7MDT20-DVP3

DATA BRIEF

The TQFP32 (7x7) Connection Kit (ST7MDT20-

T32/DVP) provides the hardware you need to
connect your ST7MDT20-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in the TQFP32 (7x7) package.

Connection Kit Contents

■ TQFP32 adapter (DB545) – Allows the

connection of your ST7MDT20-DVP3 emulator
to your application board in place of your ST7.

■ TQFP32 (7x7) device adapter (DB522) –

Adapts the emulator connection to the package
of your ST7.

■ Ironwood TQFP32 socket (SK-UGA06/32A-

01) – solders to your application board to allow
connection of the emulator.

Replacing the TQFP32 (7x7) device adapter with
your ST7 is possible using the Ironwood clam
shell socket (ref: CA-QFE32SA-L-Z-T-02-D1442).
The clam shell socket is not provided in the kit.

For more information...

■ ST7-DVP3 User Manual – Information

common to all DVP3 series emulators

■ ST7MDT20-DVP3 Probe User Guide –

Information specific to ST7MDT20-DVP3

Figure 2. TQFP32 device adapter (DB522)

Figure 3. Connection to application board

2. Plug device adapter into the

corresponding connector on the
adapter.

3. Plug the adapter’s connectors into

the J1 and J2 connectors on the target
emulation board.

Figure 1. TQFP32 adapter (DB545)

4. Align pin 1 indicators, then

insert the socket’s pins into the
connector on the device adapter.

1. Solder socket to application board.

October 2005 1/3

Pin 1

Indicators

Rev 1

www.st.com

3

ST7MDT20-T32/DVP

Revision history

Date Revision Changes

10-October-2005 1 Initial release.

2/3