ST ST7MDT10-16 User Manual

ST7MDT10-16/DVP

DIP16/SO16 Connection Kit for ST7MDT10-DVP3

DATA BRIEF

The DIP16/SO16 Connection Kit (ST7MDT10-

16/DVP) provides the hardware you need to
connect your ST7MDT10-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in DIP16 and SO16 packages.

Connection Kit Contents

■ DIP16/SO16 device adapter (DB587) – Allows

the connection of your ST7MDT10-DVP3
emulator to your application board in place of
your ST7 in DIP16 or SO16 package.

This adapter is provided by default when ordering
the ST7MDT10-DVP3 emulator (ordering code:
ST7MDT10-DVP3) and the ST7MDT10-DVP3
target emulation board (ST7MDT10-TEB/DVP).

The

34-pin flat cable

for connection between the
emulator and adapter is provided with your
ST7MDT10-DVP3 emulator.

For more information...

■ ST7-DVP3 User Manual – Information

common to all DVP3 series emulators

■ ST7MDT10-DVP3 Probe User Guide –

Information specific to ST7MDT10-DVP3

Figure 2. DIP16 application board connection

2. Remove the SO16 adapter

Pin 1

3. Plug flat cable into the J1

connector on the adapter

4. Align pin 1 indicators, then

insert the pins of the DIP16
adapter into the socket on the
application board.

1. Solder socket to

application board.

Indicators

Figure 3. SO16 application board connection

Figure 1. DIP16/SO16 device adapter (DB587)

2. Plug flat cable into the J1

connector on the adapter

3. Align pin 1 indicators, then

insert the SO16 connection pins
into the corresponding connector
on the device adapter.

October 2005 1/3

For SO16

connection

Pin 1

Indicators

1. Solder SO16 connection

pins to application board.

www.st.com

Rev 1

3

ST7MDT10-16/DVP

Revision history

Date Revision Changes

12-October-2005 1 Initial release.

2/3