Features
■ Real-time debugging
■ Breakpoints on Data and Instruction (when
debugging ST7 microcontrollers with a debug
module)
■ Output trigger
■ Input trigger
■ 256K trace records with timestamp
■ Parallel port interfaces to the host PC
■ Programmable clock frequency up to 16 MHz
■ Emulation voltage: 5.5 V
■ In-circuit programming capability via 10-pin
ICC connection
ST7MDT1-DVP2
ST7MDT1-DVP2 series emulators
Data brief
Supported devices:
Description
STMicroelectronics' DVP2 series emulators are
cost-effective solutions that provide both high
quality, real-time emulation and in-circuit
programming capability to support ST7
application development.
Emulators are delivered with ST Visual Develop
(STVD), ST's powerful, easy-to-use Integrated
Development Environment, which allows building
and debugging of ST7 applications and
programming of ST7 microcontrollers from a
single software interface.
DVP2 series emulators also support in-circuit
programming of ST7 microcontrollers via 10-pin
ICC connection and are supported by the ST
Visual Programmer (STVP), ST's powerful, easyto-use programming software interface.
ST72254G1
ST72254G2
ST72216G1
ST72215G2
ST72104G1
ST72104G2
ST72251G1
ST72251G2
ST72213G1
ST72212G2
ST72101G1
ST72101G2
September 2010 Doc ID 17953 Rev 1 1/3
For further information contact your local STMicroelectronics sales office.
www.st.com
3
Ordering information ST7MDT1-DVP2
1 Ordering information
Table 1. Device summary
Order code Reference
ST7MDT1-DVP2/EU
ST7MDT1-DVP2/UK
ST7MDT1-DVP2/US
2 Revision history
Table 2. Document revision history
Date Revision Changes
13-Sep-2010 1 Initial release.
ST7MDT1-DVP2 development kit with power
supply for europe (220V AC)
ST7MDT1-DVP2 development kit with power
supply for UK (240V AC)
ST7MDT1-DVP2 development kit with power
supply for US (110V AC)
2/3 Doc ID 17953 Rev 1
ST7MDT1-DVP2
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 17953 Rev 1 3/3
Loading...