ST ST32F320-M User Manual
M2M MCU with 32-bit ARM Cortex™ M3 CPU
DFN8
259a.ai
Wafer
Features
Hardware features
■ ARM Cortex™-M3 32-bit RISC core
■ 8 Kbytes of user RAM
■ 320 Kbytes of user Flash memory with OTP
area:
– 10-year data retention at 105°C, or 15
years at 85°C
– 500,000 Erase/Write cycles per page
– 50 million Erase/Write cycles per 64 Kbyte
sector
– Page granularity of 128 Bytes
– Block granularity: 1 Kbyte
– 128 Bytes of OTP for user
– Page Erase time 4 ms
– Block Erase 1 Kbyte in 20 ms
– Programming performance up to 10µs/byte
– Flash Erase / Write Protection software
programmable on 64 Kbyte sectors
■ Asynchronous Receiver Transmitter
supporting ISO 7816-3 T=0 and T=1 protocols
■ Two 16-bit timers with interrupt capability
■ 1.8V, 3V and 5V supply voltage ranges
■ External clock frequency from 1 up to 7.5 MHz
■ High performance provided by:
– CPU clock frequency up to 15 MHz
– External clock multiplier (2x, 3x, and 4x)
■ Current consumption compatible with GSM
and ETSI specifications
■ Power-saving Standby state
■ Contact assignment compatible ISO 7816-2
■ ESD protection greater than 4 kV (HBM)
■ 8-pin DFN (6 x 5 mm) ECOPACK® package
ST32F320-M
and 320 Kbyte high-density Flash memory
Data brief
Security features
■ Monitoring of environmental parameters
■ Protection against faults
■ ISO 3309 CRC calculation block
■ True random number generator
■ Unique serial number on each die
■ Hardware data encryption standard (DES)
accelerator
Software features
■ Flash loader
■ Flash drivers
Development environment
■ Software development and firmware
generation are supported by a comprehensive
set of development tools dedicated to software
design and validation:
– C compiler
– Simulator
–Emulator
Description
The ST32F320-M is designed for machine-tomachine (M2M) applications. Its Cortex™-M3 32bit RISC core operating at a 15-MHz frequency
provides great performance and excellent code
compacity.
July 2010 Doc ID 16481 Rev 3 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
1
Functional description ST32F320-M
Ai12577
Internal Bus
I/O
IART
GND
Cortex™
M3
CPU
Core
2 x
16-bit
Timers
CRC
Module
CLK
Clock
Gene-
rator
Module
Vcc
Tr u e
Random
Number
Gene-
rator
RAM
ST ROM
Security
Adminis-
trator
RESET
Flash
memory
DES
Accelerator
ST ROM
Firewall
1 Functional description
1.1 Hardware description
The ST32F320-M is a serial access microcontroller designed for machine-to-machine
(M2M) applications that incorporates the most recent generation of ARM processors for
embedded systems. Its Cortex™-M3 32-bit RISC core operating at a 15-MHz frequency
brings great performance and excellent code compacity to the application thanks to the
Thumb®-2 instruction set.
The high-speed embedded Flash 320 Kbyte memory introduces more flexibility to the
system.
The ST32F320-M also offers a serial communication interface fully compatible with the ISO
7816-3 standard (T=0, T=1) for smartcard applications.
Two general purpose 16-bit timers are available.
A hardware Data Encryption Standard (DES) accelerator can be used to the user to
optimize the application performance. A software library is provided for Advanced
Encryption Standard (AES) implementation.
The ST32F320-M operates in the –40 to +105°C temperature range and 1.8 V, 3 V and 5 V
supply voltage ranges. A comprehensive range of power-saving modes enables the design
of efficient low-power applications.
Figure 1. ST32F320-M block diagram
2/4 Doc ID 16481 Rev 3
Loading...