LPS331AP adapter board for a standard DIL24 socket
Features
■ Complete LPS331AP pinout in a standard DIL
24 socket
■ Fully compatible with all other available
adapter boards
■ RoHS compliant
Description
The STEVAL-MKI120V1 adapter board is
designed to facilitate the evaluation of the
LPS331AP product family. The board offers an
effective solution for fast system prototyping and
device evaluation directly within the user’s own
application.
STEVAL-MKI120V1
Data brief
The STEVAL-MKI120V1 can be plugged into a
standard DIL 24 socket. The adapter provides the
complete LPS331AP pinout and comes ready-touse with the required decoupling capacitors on
the V
power supply line.
DD
The pinout of the adapter is fully compatible with
all other available adapter boards, making it
possible to easily switch from one sensor to
another during device evaluation without the need
for board redesign.
April 2012 Doc ID 023068 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Schematic diagram STEVAL-MKI120V1
1 Schematic diagram
Figure 1. Schematic diagram
SDO
P2
J
P1
J
242322
1
2
SDA
3
CS
SCL
212019
45678910
18
INT2
171615
INT1
14
13
Header 12
11
12
Header 12
C1
100nF
Vdd_IO
VCC
R3
0R
VCC
T1
LPS331AP
U1
13
12
R2
0R
VCC
GND
Vdd
+
C2
10uF
14
T2
T3
RES
15
RES
16
T2
T1
INT1
INT111GND
T3
INT2
9
10
Res
INT2
CS
SDO
SDA
8
7
6
CS
SDO
SDA
Vdd_IO
1
R1
0R
Vdd_IO
2/4 Doc ID 023068 Rev 1
4
SCL
SCL
GND
5
AM12147v1
NC
NC
3
2
100nF
C3
STEVAL-MKI120V1 Revision history
2 Revision history
Table 1. Document revision history
Date Revision Changes
13-Apr-2012 1 Initial release.
Doc ID 023068 Rev 1 3/4
STEVAL-MKI120V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4 Doc ID 023068 Rev 1
Loading...