Magnetic field probe kit based on the LSM303DLHC
Features
■ User-friendly LSM303DLHC board
■ Complete LSM303DLHC pinout in standard
DIL 24 socket
■ Fully compatible with the STEVAL-MKI109V1
and STEVAL-MKI109V2
■ RoHS compliant
Description
The STEVAL-MKI114V1 demonstration board is a
kit made up of a probe, mounting the
LSM303DLHC compass module, which is
connected through flat cable to an adapter board
designed to make it compatible with the STEVALMKI109V1.
STEVAL-MKI114V1
Data brief
The device is mounted on the top of a very thin
probe, due to its small package size. The probe
can be easily used to measure magnetic field
intensity, i.e. for finding the source of magnetic
field disturbances on a PCB.
This is possible thanks to the “Unico” software
that comes together with the STEVAL-MKI109V2
MEMS motherboard and is able to easily show
performance and measurement of the STEVALMKI114V1.
Data coming from the digital compass connected
to the board can be read through the PC GUI
which is downloadable from the ST.com website.
July 2012 Doc ID 022196 Rev 4 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Schematic STEVAL-MKI114V1
0R
R1
0R
R2
10 0nF
C2
VDD
+
10uF
C1
Vdd_IO
SDA
SCL
INT1
INT2
4.7 uF
C3
0.2 2uF
C4
C1
6
INT1
5
INT2
4
SDA
3
SCL
2
Vdd_IO
1
Vdd
14
SETC
13
SETP
12
RES
11
RES
10
RES
9
RES
8
GN D
7
LSM30 3 DLHC
U1
T3
T2
T1
1
3
5
7
9 10
8
6
4
2
Pr obe Connector
J1
VDD
Vdd_IO
SCL
SDA
INT1
INT2
AM10166V1
0R
R1
0R
R2
10 0nF
C2
VDD
+
10uF
C1
Vdd_IO
SDA
SCL
INT1
INT2
4.7 uF
C3
0.2 2uF
C4
C1
6
INT1
5
INT2
4
SDA
3
SCL
2
Vdd_IO
1
Vdd
14
SETC
13
SETP
12
RES
11
RES
10
RES
9
RES
8
GN D
7
LSM30 3 DLHC
U1
T3
T2
T1
1
3
5
7
9 10
8
6
4
2
Pr obe Connector
J1
VDD
Vdd_IO
SCL
SDA
INT1
INT2
AM10166V1
1 Schematic
Figure 1. Schematic 1/2
Figure 2. Schematic 2/2
2/4 Doc ID 022196 Rev 4
STEVAL-MKI114V1 Revision history
2 Revision history
Table 1. Document revision history
Date Revision Changes
07-Sep-2011 1 Initial release.
14-Dec-2011 2 Cover page updated, Figure 1 and Figure 2 updated.
10-May-2012 3
12-Jul-2012 4 Modified: Description and photo in cover page.
Inserted STEVAL-MKI109V2 demonstration board and modified
features and description accordingly.
Doc ID 022196 Rev 4 3/4
STEVAL-MKI114V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4 Doc ID 022196 Rev 4
Loading...