adapter board for testing the LIS302DL
Features
■ Complete LIS302DL pinout in standard DIL 24
socket
Description
The STEVAL-MKI013V1 is an adapter board
designed to allow the evaluation of the LIS302DL,
a low-power 3-axis linear accelerometer with
digital output. The adapter board offers an
effective solution for fast system prototyping and
device evaluation directly within the user’s own
application.
The STEVAL-MKI0013V1 is designed to be
plugged into a standard DIL 24 socket. It provides
the user with the complete LIS302DL pinout, and
comes ready-to-use with the required decoupling
capacitors on the Vdd power supply line.
STEVAL-MKI013V1
Standard DIL 24 socket-compatible
Data Brief
STEVAL-MKI013V1
The pin out of the adapter is designed to be fully
compatible with all other available adapter boards,
making it possible to switch from one sensor to
another easily during device evaluation without
the need for board redesign.
June 2008 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Circuit schematic STEVAL-MKI013V1
1 Circuit schematic
Figure 1. Schematic diagram
P01
+
P13
C2
10uF
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
JP1
1
2
3
4
5
6
7
8
9
10
11
12
Head er 12
JP2
24
23
22
21
20
19
18
17
16
15
14
13
Head er 12
P24
P23
P22
P21
P20
P19
P18
P17
P16
P15
P14
31P21P
P02
P13
P01
P13
P13
P01
C1
100n F
P20
14
Vdd_ IO
GND
Rsvd
GND
GND
VDD
SCL
Reserved
CS
7
1
2
3
4
5
6
SDA
SDO
GND
Int2
Int1
LIS30 2D L
P21
13
P22
12
P13
11
P13
10
P15
9
P14
8
P19
2/4
STEVAL-MKI013V1 Revision history
2 Revision history
Table 1. Document revision history
Date Revision Changes
06-June-2008 1 Initial release
3/4
STEVAL-MKI013V1
y
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Loading...