查询STEVAL-MKI009V1供应商
LIS3LV02DL adapter board designed to be plugged into a
Features
■ Complete LIS3LV02DL pinout in standard DIL
20 socket
Description
The STEVAL-MKI009V1 Adapter Board is is
based on the LIS3LV02DL 3-axis digital output
linear accelerometer and is intended to provide
the user with an effective solution for fast system
prototyping and device evaluation directly within
the user’s application.
STEVAL-MKI009V1
standard DIL 20 socket
Data Brief
The STEVAL-MKI009V1 is designed to be
plugged into a standard DIL 20 socket. It provides
the user with the complete LIS3LV02DL pinout,
and comes ready-to-use with the required
decoupling capacitors on the VDD power supply
line.
The pinout of the adapter is designed to be fully
compatible with all other available adapter boards
so that the user can easily switch from one sensor
to another during evaluation without the need for
board redesign.
STEVAL-MKI009V1
October 2007 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Board schematic STEVAL-MKI009V1
1 Board schematic
Figure 1. Scheme
100n F
C1
P24
P02
P20
P19
CS6SCL/SPC5Vdd_ IO4SDA/SDI/SDO3SDO
7
nc
8
CK
GN D
res
10
9
P02
P13
P21
Vdd
res
11
12
P01
P01
P14
P22
1
2
RDY/ INT
16
GND
res
GN D
Vdd
13
14
P01
P13
P13
15
P13
LIS3LV02DL
P13
P01
+
10 uF
C2
P08
P09
P10
P11
P12 P13
Header 12
12
Header 12
13
8
9
10
11
17
16
15
14
P14
P15
P16
P17
2/4
P01
P02
P03
P04
P05
P06
P07
JP1
1
2
3
4
5
6
7
JP2
24
23
22
21
20
19
18
P18
P19
P20
P21
P22
P23
P24
STEVAL-MKI009V1 Revision history
2 Revision history
Table 1. Document revision history
Date Revision Changes
16-Oct-2007 1 Initial release
3/4
STEVAL-MKI009V1
y
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Loading...