查询STEVAL-MKI006V1供应商
MEMS 3-axis - ±2g/±8g digital output low power linear
accelerometer evaluation board based on LIS302DL
Features
■ Graphical user interface
■ USB connector
■ Control switches
■ MEMS sensor
■ LED indicators
■ ST7-USB microcontroller
STEVAL-MKI006V1
Data Brief
Description
The STEVAL-MKI006V1 is an evaluation kit
designed to provide the user with a complete,
ready-to-use platform for evaluation of the
LIS302DL, a low power 3-axis linear
accelerometer with digital output. The device
includes a sensing element and an IC interface
capable of translating information from the
sensing element into a measured signal that can
be used for external applications.
In addition to the MEMS sensor, the evaluation
board utilizes an ST7-USB microcontroller which
functions as a bridge between the sensor and the
PC, on which it is possible to use the graphical
user interface (GUI) included with the kit or
dedicated software routines for customized
applications.
STEVAL-MKI006V1
October 2007 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Board schematic STEVAL-MKI006V1
1 Board schematic
Figure 1. Scheme
USB_B
J1
GND
DM
DP
V+
4
3
2
1
47n
C8
1K5
R6
220n
C9
10u
+
10u
C10
Vddf
Rled
Gled
10K
R7
SW2
SW3
cs_pad
10K
R8
INT1
INT2
Vddf
miso
mosi
sck
4u7
C3
+
100n
C6
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
PB5
PB4
PB3
PB2
PB1
PB0
PE7
PE6
PE5
17
PB6
18
PB7
19
PA 0
20
PA 1
21
PA 2
22
PA 3
23
PA 4
24
PA 5
25
PA 6
26
PA 7
27
SS
28
MISO
29
MOSI
30
SCK
31
Vdd1
32
Vss1
PC4
33
VCC
OCM P1
PD3
PD2
PD1
PD0
PC7
PC6
PC5
40
39
38
37
36
35
34
CS1
1
Vssf
Vddf
UVdd
UVcc
UDP
UDM
UVss
64
oscout
OSCOU T
63
oscin
OSCIN
62
V ss2
61
Vssa
60
Vdda
59
Vdd2
iccdata
58
ICCD AT A
iccclk
57
ICCCL K
56
USBEN
55
AIN1
54
AIN0
53
SDA
52
SCL
51
nRESET
RESET
iccsel
50
Vpp/ICCSEL
OCM P2
AIN3
AIN2
43
42
41
49
PWM 0
PWM 1
AIN6
AIN5
AIN4
48
47
46
45
44
ST7265X_TQFP64
U2
C1
VCC
+
100n
C4
4u7
C2
+
100n
C5
D1
180R
R1
33p
Cosc1
SPI
J3
INT2
CS1
7
6
sck
5
mi so
4
mosi
3
INT1
2
cs_pad
1
VCC
TP1
ICP
J2
9
7
5
3
1
10
8
6
4
2
nRESET
iccsel
ic cdat a
iccclk
10K
Riccsel1
NReset
SW1
100n
C7
osci n oscout
12M H z
Yoscm1
33p
Cosc2
RledGled
7
CS
100R
D4
GR
100R
R2
Vddf
100R
R3
Vddf
2
3
4
5
6
GND
VDD
Int1
Int2
8
9
INT1
INT2
R5
100R
D3
D2
1
GND _I O
HV
Test_SE
Vdd_I O
sckcs_pad
14
SCL
Reserved
TESTEN
10
11
R4
LIS302DL
SDO
U1
SDA
12
13
mosi
miso
2/4
STEVAL-MKI006V1 Revision history
2 Revision history
Table 1. Document revision history
Date Revision Changes
16-Oct-2007 1 Initial release
3/4
STEVAL-MKI006V1
y
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Loading...