STEVAL-ISA081V1
12 V /1 A SMPS wide range demonstration board based on the VIPER26
Data brief
Features
■Vin: 85 ~ 305 Vrms / f: 45 ~ 66 Hz
■Vout1: 12 VDC ± 10 %, 1 A (at 3.3 V not loaded)
■Vout2: 3.3 VDC ± 4 %, 100 mA
■Maximum total output current: 1 A
■Standby < 120 mW at 230 VAC
■Short-circuit: protected
■PCB type and size: FR4, single-side 35 µm, 32 x 90 mm
■Isolation: isolated 4 kV / 8 mm
■EMI: according to EN55022 Class
STEVAL-ISA081V1
■ RoHS compliant
Description
The STEVAL-ISA081V1 demonstration board is a switched mode power supply (SMPS) demonstration board and it is an isolated SMPS capable of delivering a 12 W output over a wide input voltage range.
It is designed for a mains application focusing on cost and size effective solutions.
The STEVAL-ISA081V1 SMPS generates 12 V nominal output voltage using primary regulation and it is based on the VIPER26 monolithic converter, integrating a high voltage MOSFET and PWM controller in one package.
November 2010 |
Doc ID 18139 Rev 1 |
1/4 |
For further information contact your local STMicroelectronics sales office. |
www.st.com |
Schematic diagram |
STEVAL-ISA081V1 |
|
|
|
|
|
& |
4 |
|
|
! |
|
|
|
2 |
|
|
|
$ |
|
|
|
|
|
|
|
|
2/4 |
Doc ID 18139 Rev 1 |