Features
■ Input voltage range : 185 Vac to 460 Vac
■ Input frequency range: 50/60 Hz
■ Output 1: 12 V @0.6 A
■ Output 2: 5 V @ 0.55 A
■ Output power : 10 W
■ Safety: EN60950
■ EMI: EN55014
STEVAL-ISA034V1
10 W 3-phase auxiliary power supply
based on the L6565 and STW3N150
Data Brief
Description
This evaluation board offers a solution for
industrial power supplies fed by 3-phase mains. It
takes advantage of the high voltage MOSFET
STW3N150 to optimize the operation of the quasiresonant flyback converter based on the primary
controller L6565. The STW3N150 is a 1500 V
power MOSFET, designed with
STMicroelectronics’ proprietary high voltage
"MESH OVERLAY™" technology. Thanks to this
technology, the switch features very low R
per area, low gate charge and high switching
performance. The evaluation board has been
designed and developed to address low power
applications. It features two isolated outputs (12 V
and 5 V) and is capable of delivering up to 10 W
of output power.
DS(on)
STEVAL-ISA034V1
February 2008 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Circuit schematic STEVAL-ISA034V1
1 Circuit schematic
Figure 1. Schematic
5V @ 550 mA
12V @ 600 mA
J6
CON2
J6
CON2
2
3
1
R24
nc
R25
nc
R22
R21
10k
R21
10k
C17
330n
C17
Co3
Co4
Co4
22u - 25V
22u - 10V
22u - 10V
10u
L7
L6
10u
Co2
Co2
Co1
Co1
220u - 25V
220u - 25V
220u - 10V
220u - 10V
D8
D9
D8
D9
STPS3L40S
STPS3L25S
STPS3L40S
STPS3L25S
7
8
7
8
T1
T1
1
2543 6
1
2543 6
C8
C8
R9
150K
Lp =15mH
TRANSFORMER
TRANSFORMER
D5
STTH108
D4
D4
R11
R11
STTH108
STTH108
1n/2kV
1n/2kV
R10
150K
R10
150K
R7
330k
R7
330k
R8
R8
2.2k
2.2k
R19
R19
N1/N12V=38
N1/Naux=30
Core material N67
Core shape E20 (E25)
N1/N5V=87
10
10
330k
330k
C16
C16
M1
M1
12
12
6.8n - nc
C15
R12
2.2k - nc
R12
2.2k - nc
Q11 nc
Q11 nc
D6
1N4148
R15
R15
330n
560
R23
nc
nc
R18
3.5
R18
3.5
STP4N150
STP4N150
3
3
1k
1k
R17
R17
2.2
2.2
R16
R16
C14
C9
C9
15k
15k
10k
R22
10k
n.c.
C18
1
3
3
2
2
U3
U3
TL431
TL431
R20
1k
U2
PC817
100p
C19
C19
2.2n - Y1
47u
47u
2.2n - Y1
D7
D7
6
6
5
8
5
8
7
7
GD
GD
VCC
VCC
GND
GND
U1
U1
VFF
INV
COMP2CS
VFF
INV
COMP2CS
3
1
3
2
R6
C21
L9 1mH
1
1.8M
R281MR29
C20
CON1
1
1M
C23
+
4.7uF
10n -X2
2 3
27 mH
1
10n -X2
D10
1N4007
A C
D11
1N4007
A C
1
2
CON2
230Vac
R5
1.8M
R261MR27
1M
C22
+
50E
NTC2
480 - 650VDC
4.7uF
L11
4
D13
1N4007
A C
D12
1N4007
A C
L8 1mH
F4 1A
400Vac
1N4148
1N4148
100n
ZCD
ZCD
4
4
R12
R12
C10
C10
C13
L6565
L6565
120k
120k
R14
R14
220p
220p
C12
C12
R13
12k
12k
1n
1n
27k
R13
27k
2.2n
2.2n
C11
C11
L10 1mH
2/4
STEVAL-ISA034V1 Revision history
2 Revision history
Table 1. Document revision history
Date Revision Changes
08-Feb-2008 1 Initial release.
3/4
STEVAL-ISA034V1
y
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Loading...