STEVAL-IPE017V1
Single-phase energy metering demonstration board with one shunt resistor based on the STPM10
Features
■Single-phase, class 0.5 accuracy
■Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS) = 2/20 A, flin = 45 to 65 Hz
■Capacitive power supply
■SPI interface connector
■RoHS compliant
Description
The STEVAL-IPE017V1 demonstration board is a class 0.5, single-phase microprocessor-based
meter for power line systems of Vnom = 140 to 300 VRMS, Inom / Imax = 2/20 ARMS, flin = 45 to 65 Hz and Tamb = -40 to +85 °C. One shunt resistor is used for current sensing.
The STEVAL-IPE017V1 demonstration board has a 10-pin connector to be interfaced to a microcontroller or to a PC through a parallel or serial programmer for reading data.
Data brief
STEVAL-IPE017V1
December 2011 |
Doc ID 022629 Rev 1 |
1/4 |
For further information contact your local STMicroelectronics sales office. |
www.st.com |
Schematic |
STEVAL-IPE017V1 |
|
|
|
|
|
F |
T |
|
|
A |
|
|
|
R |
|
|
|
D |
|
|
|
|
|
|
|
|
2/4 |
Doc ID 022629 Rev 1 |