ST IFP016V2 User Manual

STEVAL-IFP016V2

IO-Link communication master transceiver demonstration board

based on the L6360

Features

■ Supply voltage from 18 V to 32.5 V

■ Fully protected programmable output stages

■ Supports COM1, COM2 and COM3 mode

■ 5 mA IO-Link digital input

■ Additional IEC61131-2 type-1 input

■ 3.3 V / 5 V, 50 mA linear regulator

■ Fast mode I

diagnostic

■ Diagnostic dual LED sequence generator and

driver

■ 5 V and 3.3 V compatible I/Os

■ Interface compatible with STEVAL-PCC009V2

and STEVAL-PCC009V1

■ EMC immune application against ESD, burst,

surge, RF noise, etc. according to the IEC61000-4-2, IEC61000-4-4, IEC61000-4-5, and IEC61000-4-6 standards

■ RoHS compliant

C for IC control, configuration and

Data brief

Description

The STEVAL-IFP016V2 demonstration board has external connectors for the supply voltage, two outputs (C/Q and L+), one input (I/Q) and a 30-pin connector to control and program the main functions of the board through an external demonstration board (STEVAL-PCC009V2 or STEVAL-PCC009V1).

April 2012 Doc ID 023081 Rev 1 1/4

For further information contact your local STMicroelectronics sales office.

www.st.com

Schematic diagram STEVAL-IFP016V2

!-V

1 Schematic diagram

Figure 1. Schematic diagram

2/4 Doc ID 023081 Rev 1

+ 2 hidden pages