For further information contact your local STMicroelectronics sales office.
www.st.com
7
DescriptionFLI8668
1 Description
The FLI8668 offers high integration for advanced, dual-channel applications of Picture-inPicture (PIP) and Picture-by-Picture (PBP). Two video decoders with 3D comb filters and
two channels of DCDi processing, and true 10-bit performance provide the highest quality
picture for a two-channel application.
Special performance features such as the Faroudja DCDi Cinema video format converter,
blue stretch, DDR memory with a read-write of 10 bits per pixel, and flexible sharpening
algorithms provide unparalleled performance. The video quality level that was exclusive to
Faroudja Home Theater Systems is now available in a single-chip solution.
The FLI8668 also comprises an integrated Analog Front-End (AFE) that includes two triple
ADCs, a cross-point switch, and two Faroudja Intellicomb™ 3D comb filters. The flexible
AFE ensures simple PCB design with direct connections to TV tuners and input video
connectors. Thus, the FLI8668, for a single LCD TV chassis, is able to support worldwide
standards. For regional variations, only a connector and firmware change are required.
The integrated VBI dataslicer and decoder eliminate the need for external components
resulting in significant cost reduction. The FLI8668 supports many worldwide VBI standards
for applications of Teletext, Closed Captioning, V-Chip, and other VBI services.
An embedded microprocessor and a versatile OSD in a single device will facilitate rapid
development of a reliable and attractive product. The FLI8668 utilizes the common Cortez
family firmware making migration easy and effortless across different hardware platforms
within this family.
Figure 1.System diagram
DDR
SDRAM
RF
RF
SCART or Analog RGB
#1 TV
Tuner
#2 TV
Tuner
Component Video
Y/C
13 configurable
analog inputs
FLI8668
Program
Flash
LVDS
Display
up to
WUXGA
2/7
FLI8668Feature attributes
2 Feature attributes
●Flexible digital and analog capture
–13 configurable analog inputs
–Direct connection from tuner or connector to analog input pin
–Integrated anti-aliasing filter
–RGB or YUV capture up to 165 MHz
–Full SCART support including RGB fast blank
–4:4:4/4:2:2/CCIR656/601 8/16/24/30-bit digital input port
–Simple connection to JPEG and MPEG processors with a 8-bit bi-directional
media port
●Two integrated 3D video decoders
–Faroudja IntelliComb™ technology
–Two 3D adaptive comb filters for luma–chroma separation
–Supports Composite, S-Video, and Component (including high definition) video
input signals
–Supports all broadcast TV video standards—NTSC (North America and Japan),
PAL (I, B, G, H, M, D, N), SECAM (D, K, L, B, G)
–Macrovision™ and VCR trick mode support
●VBI signal processing
–Multi-standard digital VBI dataslicer
–WST Teletext FastText page support access > 2048 page cache
–Support for WST level 1.5
–V-chip, VPS, Closed Captioning, XDS, CGMS, and WSS decode
●Faroudja DCDI Cinema format conversion
–Low angle de-interlacing processing
–Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format
–Format conversion up to WUXGA resolutions
–Panoramic and anamorphic non-linear scaling
–Adaptive media display processing for 3:2 and 2:2 video content
–Adaptive 3D noise reduction
–Media noise reduction for MPEG inputs
●On-chip microprocessor
–Integrated x186-based microprocessor with rich function library
–General Purpose Inputs/Outputs (GPIOs) available for managing system devices
(keypad, backlight, NVRAM, etc.)
–Advanced power control for low power stand-by mode
–2-wire serial master bus interface for external device control
●Advanced bitmapped OSD controller
–16 true color bitmap tiles with 1, 2, 4, and 8 bits per pixel
–Horizontal and vertical stretch of OSD menus
–Blinking, transparency, and blending
3/7
Feature attributesFLI8668
●Faroudja Truelife video enhancer
–High performance and programmable sharpening filters with noise coring
–Non-linear luma and chroma enhancement
–Removal of the DVD Chroma Upsampling Error (CUE)
–Blue stretch
–Flesh-tone correction
●Advanced Color Management (ACM-II)
–10-bit ACM-II provides flesh-tone compensation and image enhancement
–10-bit ACC ensures full dynamic range is used in video content
●Picture-in-Picture (PIP)
–Dynamic scaling for advanced PIP transitions
–Video PIP over full screen graphics and video backgrounds
–Graphics PIP over full screen video background
–Side-by-side window support
–DCDi Edge® processing for second channel window
●Output formats
–Dual-channel and 30-bit TTL output
–Dual-channel 10-bit LVDS transmitters for direct connection to LCD modules
–24-bit 4:2:2 YUV TTL output – 12 bpc
●Other features
–Integrated infrared decoder
–Integrated low bandwidth ADC with 6 input channels
–4 integrated PWM outputs for LCD backlight control
–Integrated I2S audio delay to exact audio and video synchronization
–DDR400, DDR450, and DDR466 memory speeds supported
–Memory size is flexible up to 512 Mb
–Reduces LCD video smearing artifacts
4/7
FLI8668Ordering information
3 Ordering information
Table 1.Order codes
Part numberDescription
FLI8668-LF-BC416-ball PBGA
In order to meet environmental requirements, ST offers this device in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at www.st.com.
5/7
Revision historyFLI8668
4 Revision history
Table 2.Document revision history
DateRevisionChanges
10-Sep-20081Initial release.
6/7
FLI8668
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.