ST FLI7540 User Manual

FLI7540
S/PDIF
x6
L/R
in
x1
SIF
in
DVB-CI, DVB-CI+
MII/RMII
I2S out
3.1
USB 2.0
HDMI 1 HDMI 2 HDMI 3
HP out
DDR2/3
CTL 16 bit
ST-Bus INTERCONNECT
USB 2.0
PHY
Ethernet
10/100/1G
MAC
EMI
NAND Flash
Serial Flash
UARTs x3
+ SPI
SSC x6
(I2C)IRRx
GP
ADC
x1
GP I/O
PWM x4
FDMA
Audio
PCM/SPDIF
Players/Readers
Analog Video Decoder
With 3DComb
MPEG-2/H.264/ VC1/DiVX/AVS Video Decoder
Transport Front-End
Transport
Stream Demux
ST40-300 450 MHz
OS21
HDMI Rx w/ HDCP
Macro block to Raster
AFE with 14 inputs,
x4 Video ADCs, 3 outputs
Main
Compositor
GDP 1 & 2
Main Video Processing
HDMI Audio
14 Analog
Video Inputs
Display or
Video / GFX
LVDS (TTL) Out
Double Wide
Gamma
HDMI
3:1 Mux Phy
2D/3D
GFX
VCR/AUX Scaler
Flash
Card I/F
MMC/SD
GDP3
Security System
USB 2.0 Host Ctrl
Y/C + CVBS
Analog Video Out
x3 L/R out
DDR2/3
1066 Mbps
512 MB-2 Gb
Sharpening
Filters
ACM 3D and
ACC 3
Enhancer
3x3 Matrix
Picture
Blend
CLUTs
Audio DSP
ST231
450 MHz
Audio DSP
ST231
450 MHz
8
HDMI Rx w/ HDCP
HDMI 4
HDMI Audio
Graphic
Engine
(Blitter)
ST40-300 450 MHz
Linux
L2 Cache
FDMA
DDR2/3
CTL 32 bit
DDR2/3
1066 Mbps
512 MB-2 Gb
16
32
PIP Scaler
DVB-T/C
USB 2.0
USB 2.0
PHY
USB 2.0
Host Ctrl
PCIe
PCIe
x1
HDMI Video
HDMI Video
WW Analog
Audio Demod
x2 ADC, x6 DACs
Video Input Select
Mux
Clock
Generator
REF Clock
Aux. Compositor
Analog SD Video Encoder
x2 Video DACs
TS_In1 TS_In2
Tuner
TS
in/out
CI
Freeman Ultra — iDTV SoC worldwide H.264/MPEG decoder +
Faroudja video processing
Data brief
Features
ST231 @ 450 MHz for advanced HD video
decoding (H.264/VC-1/MPEG2/…) --> Worldwide DTT broadcast video standards
Dual ST231 @ 450 MHz for advanced multi-
channel audio decoding (MPEG-1/2, MP3, WMA, Dolby® Digital/Dolby Digital+, AAC/AAC+/…) --> Worldwide DTT broadcast audio standards
Dual ST40 CPU @ 450 MHz (delivers 1600
DMIPS) runs Linux and OS21 --> One CPU (800 DMIPS) fully dedicated to application and user interface
256 Kbyte level 2 cache --> High performance
Internet TV applications
Faroudja® video processing for Main Video -->
Vivid picture quality for the consumer
14-bit Advanced Color Management (3D) and
Contrast processing --> Ultimate video quality for OEMs and consumers
Award-winning DCDi, MADi technologies -->
Crystal-clear rendering on 1080p displays
Worldwide analog audio demodulator
Picture-in-Picture --> Flexible viewing
High-performance 3D graphics engine -->
Innovative GUI and OpenGL ES 2.0/OpenVG
1.1/Flash 10 applications
Standalone 3DTV support 60L60R (frame-
sequential) and 60 Hz (line-interleaved)
Two physical graphics planes at up to 1080p/
32 bpp --> Enables rich, easy-to-use user I/Fs
Extensive analog A/V and digital HDMI (x4)
inputs --> End-user convenience for legacy and future content source boxes
DVR support on Flash/HDD --> Integration into
DTV results in convenience and ease-of-use
Extensive connectivity (dual USB host
controller + dual PHY, Ethernet MAC) --> Play back content from anywhere (home or Internet)
Advanced security with trusted ST40 CPU and
DRM support including HDCP, AES/3DES, CI/CI+ and DTCP-IP --> Protects IP & content
48-bit (3 x 16 or 1 x 16 + 1 x 32) DDR2/DDR3
1066 Mbps DRAM I/F --> Performance and flexibility with DRAM ICs
PCIe 1.1 bus --> Expansion available for
wireless/HDD applications
Dual high-speed 10-bit LVDS outputs -->
Convenient connectivity to panel TCON
Board Support Package (BSP) API accelerates
time to market
Applications
Connected, high-performance, and
mainstream iDTVs with support for 3DTVs
May 2012 Doc ID 17804 Rev 8 1/10
For further information contact your local STMicroelectronics sales office.
www.st.com
10
Description FLI7540

1 Description

The FLI7540 is a revolutionary new iDTV SoC that integrates two highly successful, market­proven subsystems: STi710x digital/front-end processing and multi-format audio/video decoding from the STB market, and Faroudja video/back-end processing from the TV market. The FLI7540 is a high-performance, state-of-the-art SoC that can power DTT/cable/satellite/IPTV iDTV designs for worldwide deployment. From the software compatibility extending from the mature STi710x STAPI layer to the extensive video processing, tuning, and tools from Faroudja Labs, the FLI7540 is the ideal solution for addressing the next generation of iDTV design requirements.
The FLI7540 is the first in a family of scalable in performance and software compatible SoCs that address mainstream and performance segments of the iDTV market.
The FLI7540 implements the latest generation of Faroudja Video Optimized technologies, which allow a high degree of customization for TV OEMs. Key technology improvements in this area include 14-bit color and contrast processing, upgraded sharpness, upgraded temporal noise reduction, and new MPEG noise reduction.
The FLI7540, with high performance CPU, A/V decode, graphics engine, and extensive network interface capability, enables TVs to deliver rich applications for convenient access to multimedia content, both from within the home, as well as from the web.
Along with a high performance, dedicated CPU for customer applications, the FLI7540 is equipped with 256 Kbyte of level 2 cache to deliver the smoothest experience of Internet TV applications. In addition, FLI7540 accelerates 3D graphics with an industry-leading GPU for OpenGL 2.0 and Flash 10 graphics and user interfaces.
ST's strong and extensive relationships with popular web and Internet TV service providers give TV OEMs a fast ramp-up to deliver compelling value-add content to the living room.
2/10 Doc ID 17804 Rev 8
FLI7540 Main features

2 Main features

The FLI7540 is a new, advanced decoding SoC targeted at next generation iDTVs (DTT, as well as with combinations of cable/satellite/IPTV). It integrates in a single IC, proven DVB­T+C demodulator, multi-stream transport demux, CPU, multi-format audio/video decode, Faroudja video processing, 3D GPU for graphics and display, advanced security, peripherals, audio/video ADCs/DACs, Digital A/V inputs/outputs, 4x HDMI switch, dual USB controllers and PHYs, Ethernet MAC, and glueless SD/MMC card interface.

2.1 Audio/video decoding

Latest generation “Delta” Video Decoder with ST231 programmable CPU core:
MPEG4-Part 2, RealVideo, MPEG2, H.264, VC-1, HD or SD
AVS HD decoding
DivX, XviD, H.263 decoding
Dual SD Decoding, PIP & Mosaic capable
Advanced de-blocking and de-ringing of decoded H.264/MPEG2/MPEG4-
P2/RealVideo HD/SD sources based on ST's Digital Source Enhancer (DSE) technology with 2D analysis window and Texture Adaptive Filter
Dual ST231 @ 450 MHz for advanced multi-channel audio decoding (MPEG-1/2, MP3,
WMA, Dolby Digital/Dolby Digital+, AAC/AAC+). Concurrent audio description decoding. Dolby Digital+ and AAC+ transcoding to Dolby Digital/DTS. In addition, generous headroom remains for OEM post-processing algorithm implementation.

2.2 Graphics and display

Main and PIP video display pipelines
10-bit arbitrary high-quality H & V scaling (linear and non-linear) with sample rate
conversion/filtering and sharpness
14-bit color/contrast processing
10-bit temporal/space noise reduction
DCDi diagonal deinterlacing and scaling
Main video display pipeline
10-bit Motion Adaptive Deinterlacing (MADi)
Independent Main and PIP display compositions (video/graphics mixing)
Pass-through display for graphics, Main video or PIP video output concurrently with
Main and PIP compositions (VCRO)
Strong 3D GPU for full HD performance of OpenGL ES 2.0, OpenVG 1.1, and Flash 10
applications
Two physical graphics planes at up to 1080p/32 bpp resolution for Main display
composition, plus a dedicated graphics plane for SD monitor/TV output
Link list based 2D and high-performance 3D graphics blitter. Up to 200 Mpixels/sec with
destination alpha blending. Capable of 3D user interface effects.
Doc ID 17804 Rev 8 3/10
+ 7 hidden pages