EVALSPEAr320PLC
Evaluation board for SPEAr320 embedded MPU
Data brief
Features
■CPU board
–SPEAr320 embedded MPU
–Up to 2 Gbits DDR2 333 MHz (std 128 Mbytes)
–Up to 16 Mbytes serial Flash memory (std 8 Mbytes)
–Two USB 2.0 full host port channels
–One USB 2.0 host device port
–One serial port (up to 115 baud)
–JTAG debug ports
■Application board
–2 x Ethernet RJ-45 connectors (ST802RT1A)
–2 x CAN DB9 plug connectors
–3 x RS-232 DB9 plug connectors (ST3232EBTR)
–1 x RS-485 DB9 socket connector (ST3485EBDR)
–Digital input connectors (parallel and serial) compatible with STEVAL-IFP007V1, STEVAL-IFP008V1 and STEVALIFP004V1 evaluation boards
–Digital output connectors (parallel and serial) compatible with STEVAL-IFP009V1, STEVAL-IFP001V1, STEVAL-IFP002V1 and STEVAL-IFP006V1 evaluation boards
–On-board temperature sensor (STLM20W87F) and potentiometer (analog input for ADC)
–Analog extension connector featuring 8 ADC lines
–General-purpose extension connector with GPIOs and I2C functionality
–DC/DC converter L7986A (+24 V / +5 V)
–MicroSD card socket
–4 LEDs, 2 general-purpose buttons and system reset button
Description
This evaluation board can be used to evaluate the SPEAr320 microprocessor with a variety of devices and especially its media independent interface (MII) automation mode.
The EVALSPEAr320PLC evaluation board kit consists of two boards: a CPU board and a MII mode application board. The SPEAr320 microprocessor is mounted on the CPU board that is plugged on the MII mode application board.
Figure 1. EVALSPEAr320PLC evaluation board
September 2010 |
Doc ID 18019 Rev 1 |
1/3 |
For further information contact your local STMicroelectronics sales office. |
www.st.com |
Revision history |
EVALSPEAr320PLC |
|
|
Revision history
Table 1. |
Document revision history |
||
Date |
|
Revision |
Changes |
|
|
|
|
20-Sep-2010 |
1 |
Initial release. |
|
|
|
|
|
2/3 |
Doc ID 18019 Rev 1 |