EVALSPEAr300
Evaluation board for SPEAr300 embedded MPU
Features
■SPEAr300 embedded MPU
■Up to 2 Gbits DDR2 333 MHz (std 128 MB)
■Up to 16 MB serial Flash memory (std 8 MB)
■Up to 2 Gb NAND Flash memory (std 64 MB)
■4 Kb serial I2C
■4 Mb SPI Flash memory
■Two USB 2.0 full Host port channels
■One USB 2.0 HS Device
■10/100 Ethernet port
■One serial port (up to 115 Kbaud)
■Debug ports (JTAG + ETM9)
Data brief
■8 ADC channels (10 bit, 1 Msamples)
■8 GPIOs
■LCD I/F up to 24 bits-per-pixel (bpp)
■SD card interface
Description
The EVALSPEAr300 evaluation board allows you to quickly evaluate and debug software for the SPEAr300. It acts as a learning tool to rapidly get familiar with the SPEAr300 features and provides a starting point for the development of the final application board. It is equipped with most of the interfaces offered by the SPEAr300.
Figure 1. EVALSPEAr300 evaluation board
September 2010 |
Doc ID 18017 Rev 1 |
1/3 |
For further information contact your local STMicroelectronics sales office. |
www.st.com |
Revision history |
EVALSPEAr300 |
|
|
Revision history
Table 1. |
Document revision history |
||
Date |
|
Revision |
Changes |
|
|
|
|
20-Sep-2010 |
1 |
Initial release. |
|
|
|
|
|
2/3 |
Doc ID 18017 Rev 1 |