74LCX07
Low-voltage CMOS hex buffer (open drain) with 5 V tolerant inputs
Datasheet − production data
Features
■5 V tolerant inputs
■High speed
–tPD = 5.2 ns (max) at VCC = 3 V
■Power-down protection on inputs and outputs
■Symmetrical output impedance
–|IOH| = IOL = 24 mA (min) at VCC = 3 V
■PCI bus levels guaranteed at 24 mA
■Operating voltage range
–VCC (opr) = 2.0 V to 3.6 V
■Pin and function compatible with 74 series 07
■Latch-up performance exceeds 500 mA (JESD 17)
■ESD performance
–HBM > 2000V
(MIL STD 883 method 3015); MM > 200V
Applications
■Automotive
■Industrial
■Computer
■Consumer
TSSOP14 |
SO-14 |
|
|
Description
The 74LCX07 is a low-voltage CMOS open drain hex buffer manufactured with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low-power and highspeed 3.3 V applications and can be interfaced to a 5 V signal environment for inputs.
The internal circuit is composed of 2 stages including a buffer output, which provides high noise immunity and stable output.
It has the same speed performance at 3.3 V as the 5 V AC/ACT family, combined with lower power consumption.
All inputs and outputs are equipped with protection circuits against static discharge, giving them 2 kV ESD immunity and transient excess voltage.
Part number |
Temperature range |
Package |
Packaging |
|
|
|
|
74LCX07TTR |
-40/+85 °C |
TSSOP14 |
Tape and reel |
|
|
|
|
74LCX07YTTR(1) |
-40/+125 °C |
TSSOP14 (automotive grade) |
Tape and reel |
74LCX07MTR |
-40/+85 °C |
SO-14 |
Tape and reel |
|
|
|
|
1.Qualification and characterization (according to AEC Q100 and Q003 or equivalent) and advanced screening (according to AEC Q001 and Q002 or equivalent) are ongoing.
June 2012 |
Doc ID 6818 Rev 7 |
1/16 |
This is information on a product in full production. |
www.st.com |
Contents |
74LCX07 |
|
|
Contents
1 |
Logic symbols and I/O equivalent circuit . . . . . . . . . . . . . . . . . . . . . . . |
. 3 |
|
2 |
Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
|
|
2.1 |
Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
|
2.2 |
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
|
2.3 |
Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
3 |
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
|
|
3.1 |
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
4 |
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
6 |
|
5 |
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
|
6 |
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
9 |
|
7 |
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
8 |
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
2/16 |
Doc ID 6818 Rev 7 |
74LCX07 |
Logic symbols and I/O equivalent circuit |
|
|
Doc ID 6818 Rev 7 |
3/16 |
Pin settings |
74LCX07 |
|
|
2.2Pin description
Table 2. |
Pin description |
|
|
|
Pin number |
|
Symbol |
Name and function |
|
|
|
|
|
|
1, 3, 5, 9, 11, 13 |
|
1A to 6A |
Data inputs |
|
|
|
|
|
|
2, 4, 6, 8, 10, 12 |
|
1Y to 6Y |
Data outputs |
|
|
|
|
|
|
|
7 |
|
GND |
Ground (0 V) |
|
|
|
|
|
|
14 |
|
VCC |
Positive supply voltage |
2.3Truth table
Table 3. |
Truth table |
|
|
Input |
Output |
|
|
|
|
A |
Y |
|
|
|
|
L |
L |
|
|
|
|
H |
Z (1) |
1. High impedance
4/16 |
Doc ID 6818 Rev 7 |
74LCX07 |
Maximum ratings |
|
|
Stressing the device above the rating listed in the “absolute maximum ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Table 4. |
Absolute maximum ratings |
|
|
Symbol |
Parameter |
Value |
Unit |
|
|
|
|
VCC |
Supply voltage |
-0.5 to +7.0 |
V |
VI |
DC input voltage |
-0.5 to +7.0 |
V |
VO |
DC output voltage (VCC = 0 V) |
-0.5 to +7.0 |
V |
V |
DC output voltage (high or low state) (1) |
-0.5 to V + 0.5 |
V |
O |
|
CC |
|
IIK |
DC input diode current |
-50 |
mA |
IOK |
DC output diode current (2) |
-50 |
mA |
IO |
DC output current |
± 50 |
mA |
ICC |
DC supply current per supply pin |
± 100 |
mA |
IGND |
DC ground current per supply pin |
± 100 |
mA |
Tstg |
Storage temperature |
-65 to +150 |
°C |
TL |
Lead temperature (10 sec) |
300 |
°C |
1.IO absolute maximum rating must be observed
2.VO < GND
3.1Recommended operating conditions
Table 5. |
Recommended operating conditions |
|
|
||
Symbol |
Parameter |
Value |
Unit |
||
|
|
|
|
||
VCC |
Supply voltage (1) |
2.0 to 3.6 |
V |
||
VI |
Input voltage |
0 to 5.5 |
V |
||
VO |
Output voltage (VCC = 0 V) |
0 to 5.5 |
V |
||
VO |
Output voltage (high or low state) |
0 to VCC |
V |
||
IOH, IOL |
High or low level output current (VCC = 3.0 to 3.6 V) |
± 24 |
mA |
||
IOH, IOL |
High or low level output current (VCC = 2.7 V) |
± 12 |
mA |
||
Top |
Operating temperature |
TSSOP14, SO-14 |
-40 to +85 |
°C |
|
|
|
|
|||
TSSOP14 (automotive grade) |
-40 to +125 |
°C |
|||
|
|
||||
|
|
|
|
|
|
dt/dv |
Input rise and fall time (2) |
0 to 10 |
ns/V |
1.Truth table guaranteed: 1.5 V to 3.6 V
2.VIN from 0.8 V to 2 V at VCC = 3.0 V
Doc ID 6818 Rev 7 |
5/16 |