SSV Works WP-ID5BT User Manual

WP-ID5BT

Weatherproof Audio System

with Bluetooth Audio

User Guide

TRACK

MODE

VOL

© Copyright 2014 SSV Works

WP-ID5BT-UG Rev. A 2-14-14

CORPORATE: SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
WEB: www.SSVworks.com Phone: [phone] FAX: [phone]

Button Locations and Functions

1. Mute or Play/Pause Button ( ):

-

Radio Mode (rAd)

: Press to mute the audio,

press again to restore the audio.

-

Auxiliary Input Mode (AU In)

: Press to mute

the audio, press again to restore the audio.

-

Bluetooth Mode (bt)

: Press to pause the track,

press again to resume playing the track.

-

iPod Mode (IPOd)

: Press to pause the track,

press again to resume playing the track.

2. Track Button ( ):

-

Radio Mode (rAd)

:

Scan Tuning: Press and release, the tuner

will scan to the next strong station and stop.
Manual Tuning: Press and hold until the
desired radio station is tuned-in.

-

Auxiliary Input Mode (AU In)

: No function.

-

Bluetooth Mode (bt)

: Press to select a higher

or lower track.

-

iPod Mode (IPOd)

: Press to select a higher or

lower track.

Safety Information

Do not attempt to disassemble or repair the WP-ID5BT
yourself.

Please call SSV Works for technical assistance
or repair information. Changes or modifications to the
WP-ID5BT not authorized by SSV Works will void the
warranty.

2 11

WARNING:

Remove fuse from SSV Works fuse holder
located at the battery before charging the
battery or jump starting the vehicle.

3.

Mode Button (Mode): Press and release the button

to

switch between the available sources: radio
(rAd), auxiliary input (AU In), Bluetooth audio
input (bt) and iPod (IPOd).

-

Mode Button (Audio Adjustment): Press and

hold for 3 seconds to enter the audio adjustment
modes: bass, treble, balance and fader. (See
Sound Control section for more infor

mation).

4. Volume Button ( ): Press to decrease

the volume or press to increase the volume.

5. Door Release Handle: Lift up on door handle

to open the door.

6. Dome Light Button : Press and release the

button to turn on the built-in dome lights,

press

again to turn off.

Reset

Resetting the WP-ID5BT:

To reset the microprocessor to the original
factory settings:

1. Press and hold the MODE button until “bA 0”

appears in the display.

2. Press the MODE button four more times and

“CLr” will appear in the display.

3. Press either the VOL or button and the

system will reset the microprocessor to the
original factory settings.

TRACK

MODE

VOL

or

TRACK

MODE

VOL

Reset

Indicator

Hold

TRACK

MODE

VOL

1

5

2

3

4

6