SSS Siedle Axiom, A 180-10, A 180-11, A 180-20, A 180-21 Operating Instructions Manual

...
Operating Instructions for end users
Siedle Axiom
A 180-10 A 180-11 A 180-20 A 180-21 A 180-30 A 180-31
2
These operating instructions supple­ment/are supplemented by:
• Siedle Axiom product information.
The relevant current edition is located in the download area on www.siedle.com
Subject to printing errors. We reserve modications depending on technical improvements.
Safety remarks 3
Application
Intended application 4
Operating remarks 4
Care instructions 4
Legal notice 4
General information
Functional scope 5
Commissioning requirements 5
Video memory 5
Update 5
Servicing 5
Touchscreen
Product overview 6
Touchscreen – Operation
Accessing menus 7
Accessing functions 7
Moving tiles 7
Deleting tiles 8
Changing pages – Start screen 8
Magnifying glass 9
Buttons / Sensors
Speech button 10
Door release button 10
Sensors 10
Earpiece volume 11
Overview of symbols 12
Status displays
Status bar 13
Login and basic settings
Showing apps 14
Showing functions 14
Showing favourites 14
Creating contacts 14
Edit contacts 14
Storing contacts as favourites 14
Important functions 15
Telephone 15
Contacts 15
Threshold 15
Video memory 15
IP cameras 15
KNX 15
Telephony
Call with number entry 16
Calling a call number from the contact list 16
Calling a call number from the call list 16
Calling a call number from the favourites list 16
Rejecting a call 16
Putting a call on hold 16
Microphone muting during the call 16
Settings 17
General information
Disposal 18
3
Safety remarks
Electrical voltage
Mounting, installation and servicing work on electrical devices may only be performed by a suitably qualied electrician.
Mounting
During installation, where applicable ensure that the surface is protected from damage.
Electrostatic charging
As a result of electrostatic charging, direct contact with the circuit board can result in destruction of the device. Direct contact with the circuit board must therefore be avoided.
Static magnetic eld
Magnetic elds can pose a hazard for pacemakers, magnetic data storage media and electronic devices. A safe distance must be maintained.
Battery safety
The DECT™ receiver contains a non-removable battery, therefore the general battery safety instruc­tions apply.
• Keep the battery away from sources of heat and naked ames.
• Never immerse the battery in liquids.
• Never attempt to dissemble or modify the battery, or to expose it to the effects of heat.
• Avoid dropping the battery and protect it from jolting and impacts which could damage the housing.
• Otherwise there is a risk of explo­sion or battery leakage, which could result in re, injury or damage to the surroundings.
• If a battery leaks and the emerging substances come into contact with the eyes, mouth, skin or clothing, rinse the affected area immediately using water and consult a doctor.
• Only use the holder provided to charge the battery in the receiver.
• The holder was developed exclu­sively for use with the receiver. Do not use with other products or storage batteries.
• A risk of overheating and defor­mation exists which could cause res or initiate electric shocks.
• For technical reasons, rechargeable batteries lose their charging capacity as they age, and the risk of a mal­function or even device failure also increases. It is therefore advisable to replace rechargeable batteries with new ones after many years of use, when their performance – such as the maximum duration of a call – has noticeably dropped.
Modern furniture is coated with an enormous variety of different lacquer and plastic nishes. Constituents of these materials can result in sof­tening of the plastic feet in table-top devices and so impair the surface of the furniture. Please appreciate that the manufacturer is unable to accept any liability.
• Avoid sources of interference such as microwave devices or electrical devices with large metal housings in the vicinity of the base station.
• For any servicing requirements, please contact your specialist dealer or electrical installer.
• When using in conjunction with a hearing aid, it is possible for hum­ming or feedback noises to occur.
• The cordless handset and the base station should be positioned at least 1 metre distant from other electrical devices.
• When used close to medical devices, functional disturbances can occur. In such cases, please contact the manufacturer.
4
Siedle Axiom with 17.8cm touch­screen made of high-quality plastic. The panel is a system product with low-prole housing for wall and table-top mounting. It provides ergonomically designed intuitive user prompting. Siedle Axiom can be used in the In-Home bus system (together with a Smart Gateway).
Intended application
The panel is part of a door commu­nication system and may only be used exclusively within this system. Siedle does not accept any liability for damage caused as a result of using the equipment for any other than its intended purpose.
Operating remarks
In order to avoid damage to the panel, please note the following: The touchscreen and the buttons can be damaged by using sharp­edged or pointed objects such as ballpoint pens or keys. Only ever use your nger to operate the panel.
When restarting the panel or the server, the panel is restarted step by step. Depending on the system size, a complete restart can take several minutes. The panel is not ready for operation until the start screen is continuously displayed.
Care instructions
Dry, aggressive cleaning agents and abrasive detergents can damage the surface! Only ever clean your indoor device using a soft damp cloth. Please ensure that no moisture ever penetrates the housing.
Legal notice
Photographs of individuals taken without their knowledge may not be published or stored in publicly acces­sible video memory facilities. Individuals who have been photo­graphed without their knowledge are entitled to request that pictures be deleted based on the right of persons to their own likeness. Never store pictures of persons you do not know in social networks or send them by email to others/public groups. This will infringe their per­sonal rights. If stored images are used as part of private / criminal law proceedings or in a police investigation, this requires prior clarication with a lawyer or the responsible police authority.
Application
5
Scope of supply A 180-21
(Table-top version with receiver)
• Siedle Axiom
• DECT™ receiver
• Tray with connector
8-pole connecting cables, 3m long with RJ45 plug
• Operating instructions for the end customer
• Product information
Scope of supply A 180-30
(Furniture version without receiver)
• Siedle Axiom
• Furniture adapter
• 8-pole connecting cables, 3m long with RJ45 plug
• Operating instructions for the end customer
• Product information
Scope of supply A 180-31
(Furniture version with receiver)
• Siedle Axiom
• DECT™ receiver
• Furniture adapter
• 8-pole connecting cables, 3m long with RJ45 plug
• Operating instructions for the end customer
• Product information
Video memory
Pictures are stored centrally on the Smart Gateway. There are currently no plans to allow pictures to be stored on SD card. Similar to photographs, saved images are subject to copyright.
Update
The Siedle Axiom software is auto­matically updated during the Smart Gateway update.
Servicing
Statutory warranty conditions apply. If the device requires servicing, contact your specialist dealer or elec­trical installer.
General information
Functional scope
With the functions calling, speech, vision, door release, telephone, light. Performance features:
• Adjustment of the graphics on the display for individual operation
17.8cm (7") touchscreen, resolu­tion 1024x600 Pixel
• Brilliant image reproduction
• Excellent audio quality
• Call differentiation between door calls, storey calls, and other calls
• Switching functions
• Video memory function
• Can be updated via Smart Gateway
Commissioning requirements
• The device must be powered via PoE (Power over Ethernet;
IEEE802.3af or 802.3at).
Scope of supply A 180-10
(Wall version without receiver)
• Siedle Axiom
• Wall mounting plate
• RJ45 socket
• Operating instructions for the end customer
• Product information
Scope of supply A 180-11
(Wall version with receiver)
• Siedle Axiom
• DECT™ receiver
• Wall mounting plate
• RJ45 socket
• Operating instructions for the end customer
• Product information
Scope of supply A 180-20
(Table-top version without receiver)
• Siedle Axiom
• Tray with connector
8-pole connecting cables, 3m long with RJ45 plug
• Operating instructions for the end customer
• Product information
6
1 Display of the start menu, time and date (standard conguration) 2 Display with touch function (touchscreen)
3 Speech button with LED display 4 Loudspeaker 5 Door release button 6 Number of pages and displayed
page
7 Brightness sensor 8 Proximity sensor 9 Microphone 10 Navigation bar 11 Status bar
Siedle Axiom is characterised by its generously dimensioned touch­screen. Two buttons are assigned to the basic functions speech and door release. Other functions are actuated at the display.
Clear symbols, intuitive operation: The most important button is also the biggest. The unmistakable mouth symbol clearly indicates what the button is for: accepting calls. The ring tone is accompanied by a ashing mouth which guides the hand of the operator. If the call is accepted, the mouth lights up con­tinuously.
Product overview
Touchscreen
Max Maier
Ring tone on/off
Eva Köhler
Door light Driveway
Private
Work
12:17 | Wednesday, February 7, 2018
Front door
2
3
4
7
6
8
9
10
11
1
5
U
\
Loading...
+ 14 hidden pages