Ssl SD322B User Manual

To ensure safety while driving

and to comply with laws,

drivers should not watch video or

operate the video device while driving.

Content

-1-

Safety Information.........................

Disc Note.......................................

Installation ....................................

Detaching control panel....................

Attaching control panel.....................

Electric Connection ......................

Remote Control .............................

Basic Operation.............................

Control Panel ................................

TFT Monitor Adjustment..................

Rear View Camera ........................

Audio Quality Adjustment.................

Setting Audio Mode .........................

Setting Background.........................

Animation.......................................

Reset Factory Settings.....................

Radio Operation............................

Listening to radio.............................

Storing stations in memory ...............

Automatic Memory Storing &

Program Scanning......................

Media Operation............................

Selecting Play Mode........................

On-Screen Display Function............

Digital Video Special Function......

Multi-subtitle language function.......

Multi-audio language function..........

20

20

21

21

23

24

25

26

28

29

30

31

32

33

2

3

4

5

6

7

8

11

11

14

14

14

14

15

15

15

16

16

16

17

18

18

19

20

20

20

Multi-angle function.........................

Title menu function ..........................

Media Setup Menu..........................

System Setup..................................

Language Setup ..............................

Video Setup ...................................

Digital Setup ...................................

BT Operation..................................

AUX/AV Operation..........................

USB Operation...............................

SD/MMC Card Operation................

MP3/WMA/JPEG/MPEG4 Play .........

Specification..................................

Troubleshooting.............................

SAFETY INFORMATION

-2-

This Digital Video Player Is A Class I
Laser Product. However This Digital
Video Player Uses A Visible/invisible
Laser Beam Which Could Cause .
Hazardous Radiation Exposure If
Directed.
Be Sure To Operate The Dvd Player
Correctly As Instructed.
Use Of Controls Or Adjustments Or
Performance Of Procedures Other Than
Those Specified Herein May Result In
Hazardous Radiation Exposure. do Not
Open Covers And Do Not Repair Your­self. Refer Servicing To Qualified
Personnel.

CAUTION:

This Digital Video Player is designed
and manufactured to respond to the

Region Management Information that is
recorded on a Digital Video disc. If the
Region number described on the Digital
Video disc does not correspond to the
Region number of this Digital Video
Player, this Digital Video Player cannot

play this disc.

REGION MANAGEMENT
INFORMATION:

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING

INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.

WARNING:

DISC NOTE

Preparing New Discs with Rough
Spots

A new di sc may ha ve rou g h e dges o n
its i nsid e a nd outs ide ed ges. If a d isc
with r ough ed ges is us ed, th e p rope r
setting wil l n ot be per form ed and th e
player will not play the di s c. Th e re fo re ,
remove the ro ug h ed ge s in ad van ce
by using a ball point pen or pencil as
shown on the right.To re mo ve t he
rough edges, press the si d e o f t h e pen
or pencil against the inside and outside
edges of the disc.

Rough s po ts
on
outsi de e dg e

Ball po in t pe n
or penc il

Rough s po ts
on insi de
edge

Labe l si de
up

Do not t ou ch
the
unde rs id e
of the d is c

Do not
bend

Wipe the d is c fr om
cent er
towa rd t he o utside
edge

Disc Cleaning

Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl
(rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional
record cleaners as they may mar the
surface of the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Discs which cannot be played
with this player

Digital Video-RAM
CDV
CD-G

Note:

A disc may become somewhat scratched

(although not enough to make it unus­able) depending on your handling it and
conditions in the usage environment.

Note these scratches are not an indica­tion of any problem with the player.

-3-

Disc formats supported by this
player

Digital
Video

VCD

CD

MP3

Audio and Video
Disc size 12 cm

Audio and Video
Disc size 12 cm

Audio
Disc size 12 cm

Audio
Disc size 12 cm

Digital
Video

VCD

CD

MP3

NOTES:

Choose the mounting location where the
unit will not interfere with the normal
driving function of the driver.

Before finally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the unit
and the system work properly.
Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause
malfunctions.

Consult with your nearest dealer if insta­llation requires the drilling of holes or
other modifications of the vehicle.

Install the unit where it does not get in
the driver s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.

'

30

INSTALLATION

-4-

If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.

Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either
from "Front"(conventional DIN Front­mount) or "Rear"(DIN Rear-mount
installation, utilizing threaded screw
holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.

DASH BO ARD

METAL MOUNTING
STRAP

HEX NUT

SPRIN G WASHE R

PLAIN WASHER

TAPPING SCREW

CONSO LE

SLIDE B RACKET
HOUSI NG

HEX BOLT

INSTALLATION

-5-

DETACHING CONTROL PANEL

1. Press the OPEN button to flip down the
front panel .

2. First slide the front panel a little to
the right, and pull it off towards you .

OPEN button

3. put it in the protective case for safe
keeping.

PROTECTIVE CASE

FRONT PANEL

KEY PLATE

PLASTIC FRAME

KEY PLATE

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove
the PLASTIC FRAME of the both sides away, then insert the two KEY PLATES into
left and right sides of chassis as above illustration.

INSTALLATION

-6-

How to clean the connectors

Frequent detachment will deteriorate
the connectors.
To minimize this possibility, periodically
wipe the connectors with a clean, soft,
dry cloth only, being careful not to
damage the connectors.

Connector

ATTACHING CONTROL PANEL

1. First, insert the right side of the front
panel into the main unit.

Bulg e

Holl ow

Bulg e

Holl ow

3. Push it back to the position for playing

2. Push the right side of the front panel
until it locks firmly into the main unit, at
one time, insert the left side of the
front panel into the main unit .

-7-

ELECTRIC CONNECTION

Note:
the earth connection cable (parking brake B-) must be connected in order for
pictures to be played back to the monitor. If the cable has not been corr ectly
connected, the message “PARKING BRAKE” appears on the monitor.

IGNITION SWITCH

RED

WHIT E

WHIT E/ BLACK

GREY

GREY /B LACK

GREE N

GREE N/ BLACK

VIOL ET

VIOL ET /BLACK

YELL OW

CONSTANT 12 VOLTS

BLAC K

GROUND(B-)

BLUE

AUTO AN TEN NA

FRON T

Lch SP K.

REAR

Lch SP K.

FRON T

Rch SP K.

REAR

Rch SP K.

LIGH T GR EE N

(B-) PARKING BRAKE

VIOL ET /WHIT E

RADIO ANTENNA JACK

(B+) 12V
REAR CAMERA SWITCH

REAR CAMERA INPUT

YELL OW

GREY

SUB WOOFER

AUDIO R OUT (red)

WIRE CONNECTION

FUSE

ISO CON NE CTOR

AUDIO L OUT (white)

VIDEO OUTPUT (brown)

RCH I N RED

LCH I N WHITE

VID EO IN YEL LOW

AV IN

REMOTE CONTROL

-8-

1. CLK Press it briefly to show the clock
time .

2. PAIR/ Press it to use the BT
function,refer to the BT operation

3. STOP Press once to pause playback,
press PLAY/PAUSE to resume playback .

4. SETUP Press it to open the SETUP
menu.

5.MO/ST(AUDIO) In radio mode, press it
to select STEREO or MONO mode (when
a station is weak, sometimes switching
to Mono will improve sound quality ) .
In Disc playback mode, pressing it button
opens the AUDIO setup menu for making
changes to the way te soundtrack is
reproduced .

6. LO/DX(SUBTITLE) Changing of the
SUBTITLE language on multi-subtitle
language Digital Video disc. In radio mode,
Press this button for distance reception
when you are located at weak signal
location, depress it for stronger signal.

7. REDIAL/ Press this button to use
the BT function, refer to BT operation.

8.GOTO/ Press this button to begin
playback at a moment in the program you
designate. Use the number buttons to
enter the data that is needed.

In BT phone menu, it serves as the
button on your mobile handset.

15

17

19

13

14

7

2

6

22

11

18

3

16

5

20

1

21

24

9

12

10

4

8

26

23

25

REMOTE CONTROL

-9-

9. / Press to skip to the next
track & press to skip back one track.

BT
LOUD,

11. VOL+/VOL- Press it to adjust
volume level .

12. / / / Use these buttons to
navigate the various menus present in the
product.

13. MENU/SUB WOOFER Press it to
display the root menu of the Digital Video
disc. Press and hold this button to turn
ON or OFF the SUBWOOFER output.

14. BAND(OSD) In Radio mode, press
this button repeatedly to switch between
the five radio bands .
In Disc Playback modes, Press this
button to see information about the disc
currently in play.

15. /MOD Press this button to turn the
unit ON , press and hold to turn the unit
OFF. Press it briefly to select

16. PLAY/PAUSE ( ) In DISC mode,
starting playback, stopping picture/track.

17. MUTE Press this button to turn off the
audio. Press again to restore the sound
to its prior volume level.

18. TITLE/PBC (A/PS) Display the
TITLE menu which is recorded on the

. changing between PBC
ON and PBC OFF on the VCD disc.
In radio mode, press shortly to scan the
preset station, press longer to enter into
automatic memory storing function .

10. Briefly press to switch between
BASS, TREBLE, BALANCE, FADE,
COLOR, BRIGHTNESS, CONTRAST,
TINT and VOLUME; Long press to display

, then briefly press to switch between

SUBWOOFER, EQ, LOCAL/DX

(in radio mode), STEREO/MONO(in
radio mode), CLK FMT, SET CLK, FRE-
QUENCY AREA, ANIMATION and WALL-

PAPER. After selecting a item above,
use VOL+/VOL- button to adjust.

a desired

work source.

Digital Video

SEL

19. ZOOM Press this button to active

the ZOOM function . Each press of the
zoom button changes the screen in the
sequence : 2x 3x 4x ½ 1/3 1/4 .
Use the / / / buttons to move
through the zoomed picture .
Note : during the JPEG playback, press
the ZOOM button, the “ZOOM 100%” will
appear on screen, then press the /
button to increase/decrease in size,
use the / / / buttons to move
through the zoomed picture .

20. ANGLE Changing of the view angle
on multi-angle Digital Video disc.

21. EQ/LOUD Press it briefly to turn to
equalization function. Press it longer to
switch the LOUDNESS function ON and
OFF .

22.

In DISC mode, Press to start forward
rapidly.press to reverse rapidly.

23. ENTER Confirm the Track/Chapter
selected with the number key or selected
with the cursor buttons on TV screen.

24. 0 - 9 These buttons are used for
numeric entry in many different menus.
In radio mode.

25. +10/ Tens digit select button,
cooperatively used with numeric buttons.
In BT menu, it serves as the
button on your mobile handset.

26. RADIO PRESET Six preset memory
buttons.