Ssl S559C User Manual

1. BUTTONS LOCATION AND FUNCTIONS

4

1

8

10

11

12

12

13

7

3

14

1. Panel Release Button

2. CD EjectButton

3. Audio Button

4. Display Button

5. Preset MemoryButtons

6. Mono Button

7. Scan Button

8. Volume Knob

9. Automatically Store/Preset Scan Button

10. Power Button

11. Band/LoudnessButton

12. TuningUp/Down& TrackUp/ Down Buttons

13. RemoteControlReceiver

14. ModeButton

15. AuxInJack

6

9

5

2

15

1.Teclapararemovero painelfrontal

2.Teclaparaejetaro disco

3.Tecladeajustede audio

4.TeclaDisplay

5.Teclasdememóriade estações

6.Teclaestéreo/mono

7.TeclaScan

8.Controlede volume

9.Teclaautomática(As)/ PresetScan(Ps)

10.TeclaLigar/desligar

11.TeclaBanda/Loudness

12.Teclasdesintonizaçãode estações/

mudançadefaixas demúsica

13.Sensordo controleremoto

14.TeclaSource

15.EntradaAuxiliar

1. Entriegel-TasteBedienteil

2. CD-Auswurftaste

3. Audio-Taste

4. Display-Taste

5. Senderspeichertasten

6. Mono-Taste

7. Scan-Taste

8. Lautstärkenregler

9. AMSTaste

10. Einschalt-Taste

11. Frequenzband-Taste

12. Titel AUF / AB- Taste

13. Fernbedienungs-Taste

14. Source-Taste

15. Front-Audio-Anschluss

1. BoutonDe DéclenchementDu Panneau

2. BoutonÉjection D'unCd

3. BoutonDe SélectionAudio

4. BoutonD'écran /Affichage D'information

5. BoutonsDes StationsPréréglées (m1~m6)

6. BoutonDe LaStéréo DuMono

7. BoutonDu Scanner

8.BoutonDeVolume

9.BoutonDeStockage DesStations DansLa Mémoire

10.BoutonD'alimentation

11.BoutonDeBande

12.BoutonDeRecherche DesStations/pistes :En Avant/ EnArrière

13.RécepteurDeLa CommandeÀ Distance

14.BoutonDeRégime

15.AuxAJack

1. Extraccióndelpanel frontal

2. Aperturadelpanel motorizado yexpulsióndel disco

3. Tecla Audio

4. SeleccióninformaciónDisplay

5. Botonesdeestaciones memorizadas

6. Botónselecciónmono/estéreo

7. BotónDeBúsqueda

8. BotónDeVolumen

9. Automáticadeemisoras/ selección dememorias

10. Encendido/Apagado

11. SelectorBandas

12. Botóndeselección de emisoras&banda de música

13. Receptordecontrol remoto

14. SelecciónmodosRadio/CD/Entrada auxiliar

15. Entradadeauxiliar

1. Tasto RilascioFrontalino

2. Tasto Eject

3. AudioControlla

4. Tasto Display

5. Tasti StazioniMemoriePreimpostate

6. BottonediStereo/Mono

7. Tasto Scan

8. Tasto Volume

9. Tasto AS/PS

10. Tasto Power

11. Tasto Banda/Forte

12. Tasto sintonizzazionesu/gui& traccia su/gui

13. Destinatariodicontrollo remoto

14. Tasto Mode

15. EntradaAux

1

2. HANDLING COMPACT DISCS

MOISTURE CONDENSATION

On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should
this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an
hour until the moisture has evaporated.

NOTES ON CDs

1.

A dirty or defective disc may cause sound
dropouts while playing. To enjoy optimum
sound, handle the disc as follows.
Handle the disc by its edge. To keep the
disc clean, do not touch the surface (P.1).

P. 1

Do not stick paper or tape on the disc (P.2).

2.

P. 2

Do not expose the discs to direct sunlight or

3.

heat sources such as hot air-ducts, or leave
them in a car parked in direct sunlight where
there can be a considerable rise in
temperature inside the car (P.3).

P. 3

4.

Before playing, clean the discs with an
optional cleaning cloth. Wipe each disc from
the center out (P.4).

NOTES ON DISCS

If you use the discs explained below, the sticky
residue can cause the CD to stop spinning and
may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that
have a sticky residue on the surface (for
example, from peeled-off stickers or from ink, or
glue leaking from under the stickers).

There are paste residue.
Ink is sticky (P.5).

*******

*******

P. 5

Do not use CDs with old labels that are beginning
to peel off.

Stickers that are beginning
to peel away, leaving a
sticky residue (P.6).

P. 6

Do not use your CDs with labels or stickers
attached.

Labels are attached (P.7).

P. 7

Do Not Use Special Shape CDs

Be sure to use round shape CDs only for this
unit and do not use any special shape CDs.
Use of special shape CDs may cause the unit
to malfunction.(P.8).

****

*******

*******

**************

*******

*******

*******

*******

*******

*******

*******

*******

P. 4

Do not use solvents such as benzine,

5.

thinner,commercially available cleaners, or
antistatic spray intended for analog discs.

P. 8

Be sure to use CDs with disc mark

RECORDABLE

REWRITABLE

Only for this unit.

CD-Rs and CD-RWs which have not undergone
finalization processing cannot be played. (For
more information on finalization processing,
refer to the manual for your CD-R/CD-RW
writing software or CD-R/CD-RW recorder.)
Additionally, depending on the recording status,
it may prove impossible to play certain CDs
record on CD-R or CD-RW.

2

3. INSTALLATION

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up
properly and the unit and system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts
can cause malfunctions.
Consult with your nearest dealerif installation requires the drillingof holes or other modificationsof the
vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.

30°

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or
from hot air, fromheater, orwhereit would besubject to dust dirt or excessive vibration.
Be sure to remove the front panel before installing the unit.

DIN FRONT/REAR-MOUNT

This unit can beproperty installed either from “Front” (conventional DIN Front-mount) or “Rear”(DIN
Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details,
refer to the followingillustrated installation methods A andB.

DIN FRONT-MOUNT (Method A)

Installation the unit

1

2

182

53

3

1. Dashboard

2. Holder
After inserting the half sleeve into the
dashboard, select the appropriate tab according
to the thickness of the dashboard material and
bend them inwards to secure the holder in
place.

3. Screw

1

6

7

4

2

5

3

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (4x12mm)

5. Screw

6. Support Strap
Be sure to use the support strap to secure the

back of the unit in place. The strap can be bent
by hand to the desired angle.

7. Plain washer

3

Removing the unit

a

a. Frame
b. Insert fingers into the groove in the front

of frame and pull out to remove the
frame. (When re-attaching the frame,
point the side with a groove down wards

b

c

Trim Plate Installation:

Push the trim plate against the chassis until it is fitted.
You must do this before you install the front panel, otherwise it can't be attached.

DIN REAR-MOUNT (METHOD B)

Installation using the screw holes on the sides of the unit.
Fasteningthe unit tothe factory radio mounting bracket.

and attach it.)

c. Insert the levers supplied with the unit

into the grooves at both sides of the unit
as shown in figure until they click. Pulling
the levers makes it possible to remove
the unit from the dashboard.

1. Select a position where the screw
holes of the bracket and the screw
holes of the main unit become
aligned (are fitted) and tighten the

2

4

5

3

2

screws at 2 places on each side.

2. Screw

3. Factoryradio mounting bracket.

4. Dashboardor Console

5. Hook(Remove this part)

Note: the mounting box, outer trim ring,
and half-sleeve are not used for method
B installation.

5

4

4. DETACHABLE CONTROL PANEL (D.C.P.)

Removing The Detachable Control Panel (D.C.P.).

1. Turn the power off

2. Press the D.C.P. release button

3. Remove the D.C.P.

PANEL RELEASE
BUTTON

Attaching the DCP

1. Attach the panel at the right side first, with

2

A

B

point B on the main unit touching point A on
the D.C.P. (As shownonthe digram).

2. Then press the left side ofD.C.P.onto the main
unit until a “click” sound is heard.

CAUTION

DO NOT insert theD.C.P from the leftside.Doing so may damage it.
The D.C.P can easilybe damaged by shocks.After removing it, placeit in a protectivecase and becarefulnot to drop
it or subject ittostrong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent
damage to the D.C.P, always storeitina protective case afterdetachingit.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to
damage it by pressingonit with fingernails, pens, screwdrivers,etc.

Note:

If the D.C.P is dirty, wipe off the dirt with soft,
dry cloth only. And use a cotton swab soaked
in isopropyl alcohol to clean the socket on the

Socket

back of the D.C.P.

5

5. WIRING DIAGRAM (20 PIN HARNESS PLUG)

FUSE

SICHERUNG

FUSIBLE

FUSíVEL

FUSIBLE

FUSIBILE

20-PIN AUDIO/POWERHARNESS (See Figure1)

20-PIN AUDIO/STROM- KABELGESCHIRR

PLAQUE 20 FICHES AUDIO/ALIMENTATION

CONECTOR DE 20 PINOS PARA AUDIO E ALIMENTACAO

CONECTOR DEAUDIO / POTENCIADE 20 PIN

CONNETTORE ISO( vedi figura1)

LINE OUT POSTERIORE---GRIGIO

RÜCKANSCHLUSS-AUS GRAU

SORTIE ARRIERE-GRIS

SALIDA DE LINEA TRASERA -GRIS

REAR LINE OUT---GREY

SAIDA TRASEIRA- CINZA

RCA-TO-RCA CABLES

(not supplied)

RCA-TO-RCA-KABEL

(nicht geliefert)

CABLES RCA-TO-RCA

(non fournis.)

CABOS RCA A RCA

(não fornecidos)

CABLES RCA A RCA

(no incluidos)

CAVO RCA A RCA

( non fornito)

AMP

Le fil de l'antenne de la puissance et l'éloignement mettent la conduite sous tension.

Ground verbindet sich mit Bodenendstation oder reinigt nichtgestrichenen Metallteil von Chassis

Le Ground se Connecte au terminal de la terre ou Lave la partie non peinte du métal du chssis

Ground Connect to ground terminal or Clean unpainted metal part of chassis

Terra-Conecte Ao Terminal Negativo Ou A Uma Superficie Metalica (sem Pintura) Do Chassi.

El Ground Conecta a terminal de tierra o Completamente despintó parte metálica de chasis

Il Ground si collega a terminale terrestre di parte di metallo non verniciare pulita di telaio

Treiben Sie Antennenleitung und entfernte Drehungsführung an.

Power antenna wire and remote turn on lead.

Impulse alambre de antena y turno remoto en liderazgo.

Il filodi potenza diantenna e ilremoto accendono comando.

Fio ParaAntena Eletrica.

WHITE

WEISS

BLANC
BRANCO
BLANCO

BIANCO

L-CH

R-CH

RED/ROT/ROUGE/VERMELHO/ROJO/ROSSO

BLUE/BLUE/BLUE/AZUL/AZUL/BLU

BLACK/BLACK/BLACK/PRETO/NEGRO/NERO

Memory/Battery
Connect to a constant 12 volt source. The radio will not work if this wire is not connected.

Geds/Batterie
Verbinden Siesich mit einer Konstanten 12Voltquelle. Das Radio wirdnicht funktionieren, wenn
diese Leitungnicht verbunden ist.

Mémoire/Pile
Connectez-vous àune source constantedu volt 12.La radio ne fonctionnerapas si cefil n'est pas
connecté.

Memória/Bateria
Conecte auma fonte constante de 12V. Oradio nao funcionara se estefio nao estiver conectado.

Memoria/Batería
Conectea unorigen constantede 12volt. Laradio nofuncionará sieste alambreno estáconectado.

Memoria/ Batteria
Collegatevi auna 12 sorgentedi volt costante.La radio non lavoreràse questo filonon è collegato

YELLOW/YELLOW/YELLOW/AMARELO/AMARILLO/GIALLO

RED/RED/RED/VERMELHO/ROJO/ROSSO

Accessory/Ignition - Connect to a switched 12 volt source.
Zubehr/ Zündung - verbindet sich mit einer umgeschalteten 12 Voltquelle.
Accessoire/ Allumage - se Connecte à une source commutée du volt 12.
Acessorio /Ignicao - Conectea uma fontede 12V chaveada.
Accesorio/ Ignición - Conecta a un origen conmutado de 12 volt.
L'accessorio/ L'accensione - si Collega a una 12 sorgente di volt commutata.

ANTENNA CABLE INPUT

ANTENNENVERLÄ NGERUNGSKABEL
CÂBLE D'EXTENSION D' ANTENNE

ENTRADA PARA CABO DE ANTENA
CABLE DE ANTENA

CAVO ANTENNA ESTENDIBILE

LEFTFRONT

LINKEVORDERSEITE

FACEAVANT GAUCHE

FRENTEESQUERDO

PARTEfrontal IZQUIERDA

PARTEanteriore SINISTRA

LEFT REAR
LINKE RÜCKSEITE
ARRIERE GAUCHE

TRASEIRO ESQUERDO

PARTE POSTERIOR IZQUIERDA

RETRO SINISTRO

WHITE-BLACK/WEISS-SCHWARZ/ BIANCO-NERONOIR-BLANC/BRANCO-CINZA/BLANCO -NEGRO/

WHITE/WEISS/BLAC/BRANCO/BLANCO/BLANCO

GREEN-BLACK/ /VERT-NOIR/VERDE-PRETO/VERDE-NEGRO/VERDE-NEROGRÜN-SCHWARZ

20-PIN AUDIO/POWER HARNESS

6 6

5 5

3 3

4 4

1 1

PIN

1
2
3
4
5
6
7
8
9

10
11

12
13
14
15
16
17
18
19
20

2 2

13 13

11 11

12 12

Figure 1

WIRE COLOR

GREY/BLACK
GREY
VIOLET
VIOLET/BLACK

GREEN
GREEN/BLACK
RED
BLACK
RED

WHITE
WHITE/BLACK

BLUE
YELLOW
BLACK

WHITE

7 7

9 9

8 8

14 14

15 15

10 10

16 16

20 20

18 18

17 17

19 19

Pin View

FUNCTION/LABEL

RIGHT FRONT SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)

LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)

IGNITION(ACC)
REAR PRE-AMP LINE OUT COMMON
RIGHT REAR PRE-AMP LINE OUT

LEFT FRONT SPEAKER (+)

LEFT FRONT SPEAKER (-)

POWER ANTENNA
BATTERY(+)
CHASSIS GROUND

LEFT REAR PRE-AMP LINE OUT

20-PIN AUDIO/STROM-KABELGESCHIRR

653412

79810

KABELFARBE

PIN

1

GRAU/SCHWARZ

2

GRAU

3

VIOLETT

4

VIOLETT/SCHWARZ

5

GRÜN

6

GRÜN/SCHWARZ

7
8

ROT

9

SCHWARZ

10

ROT

11

WEISS
WEISS/SCHWARZ

12
13
14

BLAU

15

GELB
SCHWARZ

16
17
18
19

WEISS

20

141311 12 15 16

Figure 1

RECHTER VORDERLAUTSPRECHER (-)
RECHTER VORDERLAUTSPRECHER (+)
RECHTER RÜCKLAUTSPRECHER (+)
RECHTER RÜCKLAUTSPRECHER (-)

LINKER RÜCKLAUTSPRECHER (+)
LINKER RÜCKLAUTSPRECHER (-)
ZÜNDUNG (ACC)
RÜCK-PRE-AMP-ANSCHLUSS -AUS
RECHTER RÜCK-PRE-AMP-ANSCHLUSS-AUS
LINKER VORDERLAUTSPRECHER (+)
LINKER VORDERLAUTSPRECHER (-)

MOTORISIERTE ANTENNE
BATTERIE (+)
GEHÄUSEERDUNG

LINKER RÜCK-PRE-AMP-ANSCHLUSS

201817 19

Pin View

FUNKTION / ETIKETT

GREEN/GRÜN/VERT/VERDE/VERDE/VERDE

PLAQUE 20 FICHES AUDIO/ALIMENTATION

Schéma 1

COULEUR DU CABLE

FICHE

1

GRIS/NOIR

2

GRIS

3

VIOLET

4

VIOLET / NOIR

5

VERT

6

VERT/NOIR

7
8

ROUGE

9

NOIR

10

ROUGE

11

BLANC
NOIR/BLANC

12
13
14

BLEU

15

JAUNE
NOIR

16
17
18
19

BLANC

20

Conector de 20 pinos para audio e alimentação

1

2

11

12

13

Vue des fiches

FONCTION / MARQUE
ENCEINTE AVANT DROIT (-)
ENCEINTE AVANT DROIT (+)
ENCEINTE ARRIERE DROIT (+)
ENCEINTE ARRIERE DROIT (-)

ENCEINTE ARRIERE GAUCHE (+)
ENCEINTE ARRIERE GAUCHE (-)
ALLUMAGE (ACC)
SORTIE COMMUNE ARRIERE PRE-AMP
SORTIE PRE-AMP ARRIERE DROITE
ENCEINTE AVANT GAUCHE (+)
ENCEINTE AVANT GAUCHE (-)

PUISSANCE ANTENNE
BATTERIE (+)
CHASSIS TERRE

SORTIE PRE-AMP ARRIERE GAUCHE

6

5

3

4

7

9

8

14

13

15

ALTO-FALANTE DIANTEIRO DIREITO (-)
ALTO-FALANTE DIANTEIRO DIREITO (+)

10

16

20

18

17

19

(-)

IGNIÇÃO (ACC)

SAÍDAPRE-AMP TRASEIRA(FIO COMUM)
SAÍDA PRE-AMPTRASEIRA DIREITA

ALTO-FALANTE DIANTEIRO ESQUERDO (+)
ALTO-FALANTE DIANTEIRO ESQUERDO (-)

ANTENA ELÉTRICA

MASSA (FIO TERRA)

SAÍDA PRE-AMP TRASEIRA ESQUERDA

6

GREY-BLACK/GRAU-SCHWARZ/GRIS-NOIR/CINZA-PRETO
/GRIS-NEGRO/GRIGIO-NERO

GREY/GRAU/GRIS/CINZA/GRIS/GRIGIO

VIOLET-BLACK/

VIOLETT-SCHWARZ/VIOLET-NOIR/VIOLETA-PRETO

/VIOLETA-NEGRO/

VIOLA-NERO

VIOLET/VIOLETT/VIOLET/VIOLETA/VIOLETA/VIOLA

CONECTORDEAUDIO/POTENCIA20PIN

3

4

1

2

14

13

11

12

Imagen 1

COLOR DE CABLE

PIN

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20

GRIS/ NEGRO
GRIS
VIOLETA
VIOLETA / NEGRO

VERDE
VERDE / NEGRO
ROJO
NEGRO
ROJO
BLANCO
BLANCO / NEGRO

AZUL
AMARILLO

NEGRO

BLANCO

ALTAVOZFRONTAL DERECHO (-)
ALTAVOZFRONTAL DERECHO (+)
ALTAVOZTRASERO DERECHO (+)
ALTAVOZTRASERO DERECHO (-)

ALTAVOZTRASERO IZQUIERDO (+)
ALTAVOZTRASERO IZQUIERDO (-)

IGNICIÓN (ACC)

LINEA DE SALIDA PRE-AMP TRASERA
LINEA DE SALIDA PRE-AMP TRASERA DERECHA
ALTAVOZFRONTAL IZQUIERDO (+)
ALTAVOZFRONTAL IZQUIERDO (-)

ALIMENTACIÓN DE ANTENA
BATERÍA(+)

CHASIS DE TIERRA

LINEA DE SALIDA PRE-AMP TRASERA IZQUIERDA

IDENTIFICAZIONE PIN

3

4

1

2

14

13

11

12

FIGURA 1

COLORE CAVO

PIN

1
2
3
4
5
6
7
8
9

10

11
12
13
14
15
16
17
18
19
20

GRIGIO/NERO

GRIGIO

VIOLA

VIOLA/NERO

VERDE

VERDE/NERO

ROSSO

NERO

ROSSO
BIANCO

BIANCO/NERO

BLU

GIALLO
NERO

BIANCO

CASSA ANTERIORE DESTRA(-)
CASSA ANTERIORE DESTRA(+)
CASSA POSTER. DESTRA (+)

CASSA POSTER. DESTRA (-)

CASSA POSTER. SINISTRA (+)

CASSA POSTER. SINISTRA (-)

ACCENSIONE (TAKE OUT NIEZIONE)

MESSA ATERRA

AMPLIFICATORE CASSAPOST.

CASSA ANTERIORE SINISTRA(+)
CASSA ANTERIORE SINISTRA(-)

ANTENNA

BATTERIA(+)

MESSA ATERRA

AMPLIFICATORE CASSAPOST. SX

5

15

5

15

6

7

8

16

18

17

Vista de los Pin

FUNCI

6

7

8

16

18

17

VISUALE PIN

FUNZIONE

RIGHTFRONT
RICHTIGEVORDERSEITE
FACEAVANT DROITE
FRENTEJUSTO
PARTEFRONTAL ADECUADA
PARTEANTERIORE GIUSTA

RIGHTREAR
RICHTIGERÜCKSEITE
ARRIEREDROIT
DIREITOJUSTO
PARTEPOSTERIOR ADECUADA
RETROGIUSTO

9

10

20

19

9

10

20

19

DESTRA

6. BASIC OPERATIONS

1) PANEL RELEASE BUTTON ( )

Press this button toremove the control panel.

3) POWER ON/OFF BUTTON( )

Press this button toturn on or off the power.

11) DISPLAY BUTTON (DISP)

Press this button briefly, the LCD will display the clock for about 2 seconds, then return to previous
display mode.

Clock Adjustment

Under clock display mode, press DISP button until the LCD flashes, press Tuning Up Button to adjust
hour and TuningDown Button to adjustminute.

4) MODE BUTTON (MODE)

Press this button to select Radio and CD modes.
The available selections depends on version:
Radio CD Player
Radio > CD

5) FRONT AUXILIARY INPUT JACK

AUX IN JACK IN PANEL

Connect the external signal to AUX in jack located
at the front of the panel , then press MODE button
to select Aux mode. Press MODE button again to
cancel Aux mode andreturn to previous mode.

1

Left Audio

2

Right Audio

3

Ground

3.5mm AudioIn Cable (notincluded)

RESET BUTTON

The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a
ballpoint pen or metalobject will activate it.Thereset button is to be activatedforthe following reasons:

Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.

Note: If the unit cannot function normally after reseting please use a cotton swab soaked inisopropyl
alcohol to clean the socket on the back of the control panel.

,

7

7. AUDIO OPERATIONS

15) VOLUME KNOB

Turn thisknob to adjust desired volume level.

16) AUDIO BUTTON

Press this button to select desired audio function.

ORDER OF FUNCTION:
VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD)

While the selected function is displayed, turn Volume Knob to adjust the level within 5 seconds,
otherwise the unit will return to volume adjustment mode.

BEEPS 2ND,BEEP ALL ,BEEP OFF

Press and hold SELECT button to determine how the beep sound is generated when the keys
are pressed,using V-UP/V-DN to select the desires settings:
BEEP 2ND Beeps only when the second function of the dual function button is selected (long
press).
BEEP ALL Beeps when any buttons is pressed.
BEEP OFF To disable the beep option.

14 ) BAND/LOUDNESS BUTTON (BAND/LOUD)

Press the Band/LoudnessButtonfor couple ofseconds to switch theloudness on oroff.When Loudness is
on, display will show'Loud On' for afewseconds.

8

8. RADIO OPERATIONS

1 ) AUTO MEMORY STORE/PRESET SCAN BUTTON (AS/PS)0

1. PRESET SCAN: Press AS/PS button briefly to enter Preset Scan mode, it will scan all the preset
stations in the memories, you can hear that it will stay on each station for about 5 seconds.

2. AUTO MEMORY STORE: Press AS/PS button for couple of seconds to enter Auto Store mode,
this feature will automatically scanthe current band and enterup to 6 strongeststations into the 6
preset memories. To stop Auto Store & Scan, press the AS/PS button again.

7) STATION PRESET BUTTONS (M1-M6)

1. Press these buttons briefly to recall the stored stations in the selected band.

2. Presetting stations manually, Press the BAND button to select the band for the stations to be

preset. Use Tuning Up/Down to tune in the stations to be preset. Press the Preset button at which
you want to store the station for at least 2 second. The preset number will appear on the display
accompanied by a beep, this indicates that the station has been stored into memory.

14) BAND/LOUDNESS BUTTON (BAND/LOUD)

This a dual function button. Press this button shortly to change between BAND FM1, FM2, FM3 or
AM bands. Press this button for couple of seconds to turn Loudness function on or off.

DUAL FREQUENCY SWITCH

Unit is defaulted in U.S.A frequency, if EURO frequency is required, a sharp pen is needed to
switch the button on the left side of the chassis to EURO frequency.

EU

US

8~9) TUNING / SEEK UP AND TUNING / SEEK DOWN BUTTONS

1. Press thesebuttons briefly,and the unit will operatein AUTO SEARCH tuning mode,the radio will
tune up or down to the next station and remain on that station.

2. Press these buttons for more than 2 seconds, operate as MANUAL SEARCH buttons, under this

mode the tuning frequency will advance up or down rapidly when the button is pressed. If the
buttons are not pressed within 3 seconds, theywill return to auto search mode.

12) MONO STEREO BUTTON (MO/ST)

When you receivea station,“ST” onthe display willbe on. Pressthis button toenter Mono mode.

13) SCAN BUTTON(SCAN)

Press this button, the radio will tune up to search stations, the available stations will blink and stay
on the display for a few seconds.

9

9.CD OPERATIONS

M1) PAUSE BUTTON ( )

Press this button to pause CD play, press again to release pause.

M2) INTRO SCAN BUTTON (INT)

Press this button,the first 10 secondsof each track will be played sequentiallyuntil this button
is pressed again, then normal play will resume at the current track.

M3) REPEAT BUTTON (REP)

Press this button, the current track will be played repeatedly until this button is pressed again.

M4) RANDOM PLAY BUTTON (RDM)

When random play mode is selected, the tracks will be played in random order, press this
key one more time to cancel random play mode.

8~9) TRACK UP AND TRACK DOWN BUTTON

Press the Track Up Button to skip to the next track or previous track. Press the Track Down
button during play will return to the beginning of the current track, press it one more time to
skip to previousskip. Press and holdTrack Up/Down Buttonto fast forward orfast reverse. CD
player starts playing when you release the button.

2) EJECT BUTTON ( )

Press this button to eject the CD from the unit. The receiver will switch to radio mode
automatically.

EJECT BUTTON

10

10.REMOTE CONTROL

10

OPERATIONS:

Key

1. Power

2. Audio

3. Volume Up/Down

4. Tuning Up/Down

()

1

3

4
5

6
7

8
9

Radio Mode

Power On/Off

Select Vol, Bas,
Tre,Fad, Bal

Adjust Vol,Bas,
Tre,Fad,Bal

Tuning/SeekUp/Down

2

11
12
13

14

CD Player Mode

Power On/Off

Select Vol, Bas,
Tre,Fad, Bal

Adjust Vol,Bas,
Tre,Fad,Bal

TrackUp/Down

5. Scan (SCN)

6. Band (BND)

7. Loc

8. Mute

9. Mono/ST (MO)

10. Numeric Key(1)
(2)
(3)
(4)
(5)
(6)

11. Mode (MOD)

12. AMS

13. PEQ

14. DISP

Station Scan
Band/Loudness

Local/DX

Mute

FM Mono/Stereo

Preset station 1
Preset station 2
Preset station 3
Preset station 4
Preset station 5
Preset station 6

Change to CD Mode

Auto Store/Preset Scan

Preset EQ

Display Clock

No Function

Loudness

No Function

Mute

No Function

Pause

CD Scan
Repeat
Shuffle
No Function

No Function

Change to Radio Mode

No Function

Preset EQ

Display Clock, Track,
Play Time

11

11. SPECIFICATIONS

CD PLAYER

System
Usable disc
Sampling frequency
No ofquantizationbits
Frequency
Number ofchannels
S/N Ratio

RADIO SECTION
FM

Frequency Range

Intermediate Frequency
Usable Sensitivity
Stereo Separation
S/N Ratio

AM/MW

Frequency Range

Intermediate Frequency
Usable Sensitivity
S/N Ratio

GENERAL

Power Supply
Polarity
Speaker impedance
Power Output

REMARK :
Specifications subjecttochange without notice.

CD PLAYER

System
Abspielbare Discs
Sampling-Frequenz
Anzahl Quantisierungsbits
Frequenz
Anzahl Kanäle
Signalrauschabstand

RADIOTEIL
FM

Frequenzbereich

Zwischenfrequenz
Nutzbare Empfindlichkeit

Stereotrennung
Signalrauschabstand

AM/MW

Frequenzbereich

Zwischenfrequenz
Nutzbare Empfindlichkeit
Signalrauschabstand

ALLGEMEINES

Stromversorgung
Polarität
Lautsprecherimpedanz
Ausgangsleistung

ANMERKUNG:
Technische Änderungen ohne Meldepflicht vorbehalten.

Compact discaudiosystem
Compact disc

44.1KHz
1bit
5-20,000Hz
2 stereo
70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHz
Better than15dBatS/N30 dB
25 dBat1KHz
50 dB

530-1710KHz U.S.
522-1620KHz EURO
450KHz
Better than45dB
40 dB

DC 11-14V
Negative Ground
4 ohms
4x 50Watts

Compact DiscAudioSystem
Compact Disc
44,1 kHz
1 bit
5-20.000Hz
2 Stereo
70 dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHz

Besser als15dBbei einem
Signalrauschabstand von30dB
25 dBbei1kHz
50 dB

530-1710KHz U.S.
522-1620KHz EURO
450KHz

Besser als45dB
40 dB

DC 11-14V
Erde negativ
4Ohm
50 Wx4

CD Player

Sistema:
Tipo de disco:
Frequência de Amostragem:
Conversor D/A:
Resposta de frequencia
Número de canais:
Relação sinal/ruído:

Rádio FM

Faixa de Frequencia:

Frequência Intermediária:
Sensibilidade útil:
Separação estéreo
Relação Sinal/Ruído

AM/MW

Faixa defrequencia:

Frequencia intermediária:
Sensibilidade útil:
Relação Sinal/Ruído:

Geral:

Alimentação:
Polaridade:
Impedancia alto-falantes:
Potência de saída:

Nota:
As especificações estão sujeitas a alterações sem prévio aviso.

CD PLAYER

Sistema:
Disco:
Frecuencia Muestreo:
Cuantificación:
Frecuencia:
Número decanales:
Relación señal/RuidoS/NRatio

RADIO SECCIÓN
FM

Rango Frecuencia:

Frecuencia Intermedia:
Sensibilidad Útil:
Separación estereo:
S/N Ratio:

AM/MW

Rango Frecuencia:

Frecuencia Intermedia:
Sensibilidad útil:
S/N Ratio:

GENERAL

Alimentación:
Polaridad:
Impedancia altavoces:
Potencia de salida:

Nota:
Debido alrápidoavance tecnológico, estas especificaciones están
sujetas acambiossin previo aviso.

Sistema áudioCD

CD

44.1KHz
1bit
5-20,000Hz
2 estéreo
70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHZ

melhor que15dBaS/N30dB
25 dBat1KHz
50 dB

530-1710KHz U.S.
522-1620KHz EURO
450KHz

Melhor doque45dB
40dB

DC 11-14V
Terra negativo
4ohms
50wx4

Compact discaudiosystem.
Compact Disc.

44.1KHz.
1bit.
5-20,000Hz.
2 estereo.
70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7Mhz.
Mejor que15dBaS/N30dB.
25dB a1Khz.
50dB.

530-1710KHz U.S.
522-1620KHz EURO

450KHz.
Mejor que45dB.
40dB.

DC 11-14V.
Negativo a masa.
4 Ohms.
4x50W.

LECTEUR CD

Système
Disques utilisables
Fréquence échantillonnage
Nbre dequantisationbits
Fréquence
Nombre decanaux
Ratio S/B

SECTION RADIO
FM

Gamme defréquences

Fréquence intermédiaire
Sensibilité utilisable
Séparation stéréo
Ratio S/B

AM/MW

Plage defréquences

Fréquence intermédiaire
Sensibilité utilisable
Rapport Signal/Bruit

GENERAL

Alimentation
Polarité
Résistance desenceintes
Puissance desortie

REMARQUE :
Les spécifications sont susceptibles d'être modifiées sans
préavis.

Compact discaudiosystem
Compact disc

44.1KHz
1bit
5-20,000Hz
2 stéréo
70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHz
Plus de 15dB à S/B30dB
25 dBà1KHz
50 dB

530-1710KHz U.S.
522-1620KHz EURO
450KHz
Supérieure à45dB
40 dB

11 -14VDC
Masse /négative
4 ohms
50W x4

LETTORE CD

Sistema
Tipo di disco
Frequenza di campionatura
N° quantizzazioniBit
Frequenza
Numero diCanali
Rapporto S/N

SEZIONE RADIO
FM

Raggio diFrequenza

Frequenza intermedia
Sensibilità
Separazione Stereo
Rapporto S/N

AM/MW

Raggio diFrequenza

Frequenza intermedia
Sensibilità
Rapporto S/N

GENERALE

Alimentazione
Polarità
Impedenza altoparlanti
Potenza d'uscita

Le specifichesonosoggette a cambiamenti senza
alcun preavviso.

12

Sistema di Audio CD
CD

44.1KHz
1 bit
5-20,000 Hz
2 stereo
70db

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 Mhz
migliore di15dBaS/N 30 dB
25dB a1KHz
50dB

530-1710KHz U.S.
522-1620KHz EURO

450Khz
migliore di45dB
40dB

Dc11 14V
Terra negativo
4 ohms
4x 50Watts

12.TROUBLE SHOOTING

Before going through the check list, check wiring connection. If any of the problems persist after check
list has been made, consult your nearest service dealer.

Symptom

No power

Disc cannot be loaded
or ejected

No sound

The operation keys do
not work

Cause

The car ignition is not on.

The fuse is blown.

Presence of CD disc inside
the player.

Inserting the disc in reverse
direction.

Compact disc is extremely
dirty or defective disc.

Temperature inside the car is
too high.

Condensation.

Volume is in minimum.
Wiring is not properly

connected.
The built-in microcomputer is

not operating properly due to
noise.

Solution

If the power supply is properly connected
to the car accessory terminal, switch the
ignition key to “ACC”

Replace the fuse.
Remove the disc in the player, then put a

new one.

Insert the compact disc with the label
facing upward.

Clean the disc or try to play a new one.

Cool off or until the ambient temperature
returns to normal.

Leave the player off for an hour or so,
then try again.

Adjust volume to a desired level.
Check wiring connection.

Press the RESET button.
Front panel is not properly fixed into its
place

Sound skips.

The radio does not
work.
The radio station
automatic selection
does not work.

ERROR 1

ERROR 2

If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)

The installation angle is
more than 30 degrees.

The disc is extremely dirty or a
defective disc.

The antenna cable is not
connected.

The signals are too weak.

Mechanism Error

Servo Error

Adjust the installation angle to less than
30 degrees.

Clean the compact disc or try to play a
new one.

Insert the antenna cable firmly.

Select a station manually.

Press the reset button if the error code
does not disappear, consult your nearest
service dealer.

Press the reset button if the error code
does not disappear, consult your nearest
service dealer.

13