SSHEAT 60-150, 60-120, 60-90, 60-60 User Manual

USER AND INSTALLATION

GUIDE

SSH INDOOR SERIES

MODELS

60-150 60-120
60-90 60-60

Manual updated on 4 January 2016

THE EFFICIENT HEATING

1

TABLE OF CONTENTS:

1. Safety warnings

2. User's guide and guarantee

3. Information about technology and technical

specifications of the device

4. Installation

Before installation, please read this guide carefully for

an appropriate installation and later use.

If you have any questions regarding the installation or

use of the product, please contact us through our

website: www.ssheat.co.uk or directly through your

distributor.

Thank you.

Thank you for purchasing SS Heat Products.

Our products have the highest certifications worldwide and are

manufactured under the strictest quality standards.

2

1. Safety warnings

BEFORE YOU CONNECT THE DEVICE, READ THIS MANUAL CAREFULLY

WARNINGS

Do not spray the panels with water or detergents during cleaning.

o Spilling water or detergents on the panels may result in colour changes and stains.

Do not cover the surface of the SSH panel while it is switched on.

o This may result in reduced performance and malfunction due to overheating.

Make sure you connect the SSH panel to the mains and install a differential circuit breaker

as well as switches or chrono-thermostats.

o Misuse may result in accidents due to malfunction, such as electric shock, fire and others.

Since the SSH panel is designed to be used while hanging from the ceiling, it must not be

mounted on the floor or on a wall.

o If you do not follow these instructions, you run the risk of burns.

Install wires appropriately and attach the electrical connection so that it is not exposed to

moisture.

o If you do not follow these recommendations, it may result in electric shock due to

malfunction of the SSH panel.

Do not use sprays or flammable insecticides near the SSH panel.

o If you do not follow these recommendations, it may result in fire and explosions.

Do not place flammable substances near the SSH panel, such as oils, gas containers,

sprays, etc.

o If these recommendations are not followed, it may result in explosions or fire.

Do not strike the SSH panel.

o If you do not follow the instructions appropriately, there may be some risks due to

malfunction.

The panels are not designed to be used by children or ill people with limited abilities.

o Use of SSH panels must be supervised by a responsible person in order to guarantee that

the device can be used safely.

Do not touch the SSH panel with your hands or other items while the plate is switched on.

o If you do not follow this recommendation, you run the risk of skin burns.

If the wiring becomes damaged or broken, contact technical support or qualified personnel

so it can be replaced.

o Do not disassemble the panel. Opening the panel and touching the electrical wires may

result in electric shock.

Do not cover the panels with other materials (clothing, adhesive tape, etc.).

o In addition to lowering efficiency, it may cause an accident and damage the system.

Do not use the SSH panel in areas where it may be splashed by water.

o To use SSH panels in a bathroom, you must install the device in compliance with current

regulations, so that switches and other controls are not within an area with a risk of
splashing water.

3

Damaged or defective SSH panels are not covered by the guarantee whenever:

• The damage has been caused by environmental conditions.

• Damages are caused by variations in the mains supply.

• The SSH panel is damaged by removal, disassembly and reassembly.

• The SSH panel is damaged due to handling, the insertion of foreign substances or perforation of

the panels.

• The device is reinstalled without supervision by certified installers.

• Damages to the SSH panel or its components due to misuse by the customer.

• Flooding, earthquakes, fire, etc.

Thermostats

In case the installation incloude optional thermostats:

• Follow the instructions in the manual for the thermostat.

• Keep flammable substances away from the Thermostats

• In the event that the maximum capacity of the thermostat as specified on the SSH panel is

exceeded, a magneto-thermal switch must be used.

• Misuse of the thermostat may result in accidents.

Storage

• Do not place heavy items on the SSH panel for storage as they may cause damage or

malfunction of the SSH panel.

• For storage, do not stack more than 10 plates at the same time.

• Keep stored plates away from moisture.

2. User's guide and guarantee

Components included in each box

4 X SS HEAT direct heat radiation plate
4 X Plastic trims to cover the screw holes after installation.
1 X this instruction manual.

Use of the device

• Switch on the panels using the switch, thermostat or timer. The heat will become more

noticeable 5 minutes after turning on the device.

• To heat the room, the device emits infrared rays similar to the sun. Take into account that, when

you install the device on the ceiling, this must be done at an appropriate distance so as to
maximise its effect. (For more details, refer to the “Installation” section).

• To switch off the heating panels, disconnect it from the mains using the switch, timer or

thermostat connected to the device.