SSAC Mounting Sockets Catalog Page

Approvals:

Approvals:

Accessories

Mounting Sockets

DIN Rail or Surface Mount Sockets
8 Pin Octal Socket (600 VAC)

Description

8 pin 35 mm DIN rail or surface mount socket. OT08PC
is rated at 10 A at 600 V AC and has pressure clamp
terminals. For use with AWG 12 to 22 (3.2 to 0.33 mm2)
wire sizes. Hold-down clips not available.

P/N: OT08PC

Inches (Millimeters)

8 Pin Octal Socket (300 VAC)

Description

May be surface mounted with two #6 (M 3.5 x 0.6)
screws or snaps onto a 35 mm DIN rail. A spring
mechanism allows easy removal. Screw terminals
with captive wire clamps accept up to two #14 AWG
(2.45 mm2) wires. Rated 10 A at 300 V AC. Uses
PSC8 hold-down clips.

P/N: NDS-8

Approvals:

Inches (Millimeters)

11 Pin Magnal Socket

Description

May be surface mounted with two #6 (M 3.5 x 0.6)
screws or snaps onto a 35 mm DIN rail. A spring
mechanism allows easy removal. Screw terminals
with captive wire clamps accept up to two #14 AWG
(2.45 mm2) wires. Rated 10 A at 300 V AC. Uses
PSC11 hold-down clips.

P/N: NDS-11

Inches (Millimeters)

Hold-Down Clips

Description

Securely mounts plug in controls in any position.
Also provides protection against vibration. Select
the PSC8 for use with NDS-8 or the PSC11 for
use with NDS-11 sockets. Comes in sets of two.

P/N: PSC8

PSC11

12.2

MS002B01 06.09.05

Low Voltage Products & Systems

Accessories

Mounting Sockets

DIN Rail

Description

Industry standard 35 mm aluminum or steel DIN
rail. C103PM aluminum rail is available in 36 in.
(91.4 cm) lengths. 017322005 zinc bichromate
plated steel rail is available in 78 in. (2 m) lengths.

P/N: C103PM (Al)
017322005 (Steel)

Surface Mount Sockets
8 Pin Octal Socket (600 VAC)

Description

8 pin surface mount socket with binder head screw
terminals. Rated 10 A at 600 V AC. When used with
TDM, TDB, TDS Series timers the combination is UL
Listed. Uses PSCRB8 hold-down brackets.

Inches (Millimeters)

C103PM Aluminum Rail
(Prepunched cut out dimensions are approximate.)

Inches (Millimeters)

017322005 Zinc Bichromate Plated Steel Rail
(Prepunched cut out dimensions are approximate.)

Approvals:

MS002B01 06.09.05

Low Voltage Products & Systems

P/N: P1011-6

Inches (Millimeters)

Hold-Down Brackets

Description

Designed for use with P1011-6 socket. Securely
mounts 8 pin plug-in controls in any position, and
provides protection against vibration. Comes in
sets of two.

P/N: PSCRB8

12.3