SSAC KSPU Series Data Sheet
KSPU SeriesTimer
(Positive Switching)
Connection:
L1 N/L2
(Negative Switching)
The KSPU Series is a factory programmed module
available in any 1 of 14 standard functions. The
KSPU offers a single adjustable timer or counter
function. Switch adjustment allows accurate
selection of the time delay or number of counts
the first time and every time. The 1A steady,
10A inrush rated solid-state output provides 100
million operations, typical. Its microcontroller
timing circuit provides excellent repeat accuracy
and stability. Encapsulation protects against
shock, vibration, and humidity. The KSPU Series
is a cost effective approach for OEM applications
that require small size, solid state reliability, and
accurate switch adjustment.
See Appendix B, page 165, Figure 1 for dimensional
drawing.
Switch Adjustment:
Features:
• Choose 1 of 14 standard functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.1% repeat
accuracy
• 1A steady, solid-state output, 10A inrush
• Accurate switch adjustment
• 12 to 240V in 3 options
• Delays from 0.1s - 1023h
• Counts 1 to 1023
Approvals:
Auxiliary Products:
• Female quick connect:
P / N : P1 0 1 5 -6 4 ( A WG 1 4 / 16 )
P/N: P1015-14 (AWG 18/22)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
KSPU11M
KSPUA2I
KSPUA8C
If desired part number is not listed, please call us to
see if it is technically possible to build.
V = Voltage
S1 = Initiate Switch
L = Load
UTL = Untimed Load
Order Table:
KSPU
X
Input
─A - 24 to 240VAC
─P - 12 to 120VDC
positive switching
─N - 12 to 120VDC
negative switching
─1 - 12VDC
positive switching
─4 - 120VAC
─9 - 120/240VAC
X
Time Delay/Counts
─1 - 0.1 - 102.3s
─2 - 1 - 1023s
─3 - 0.1 - 102.3m
─4 - 1 - 1023m
─5 - 0.1 - 102.3h
─6 - 1 - 1023h
─7 - 1 - 165 counts (straight) w/ pulsed output
─8 - 1 - 1023 counts (binary) w/ pulsed output
─9 - 1 - 7 counts to start 1 - 63s or m interval time
Specications
Time Delay
Type ..............................Microcontroller circuitry
Range ................................0.1 - 102.3s, m or h in 0.1s, m or h increments
1 - 1023s, m or h in 1s, m or h increments
1 - 63s or m in 1s or m increments
Repeat Accuracy ................... ±0.1% or 20ms, whichever is greater
Setting Accuracy ...................≤ ±1% or 20ms, whichever is greater
Reset Time ......................... ≤ 150ms
Initiate Time ....................... ≤ 20ms
Time Delay vs Temp. & Voltage ...... ≤ ±2%
Count Range ....................... 1 - 1023 in 3 ranges
Count Rate ........................≤ 25 counts per second
Input
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 120VDC; 24 to 240VAC
Tolerance .......................... ≤ ±15%
AC Line Frequency / DC Ripple ...... 50/60 Hz / ≤ 10%
Power Consumption ................ AC ≤ 2VA; DC ≤ 1W
Output
Type ..............................Solid-state output
Rating ............................ 1A steady, 10A inrush for 16ms
Voltage Drop ......................AC ≅ 2.5V @ 1A; DC ≅ 1V @ 1A
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD, I,
TS, US, UB, AM, PSD,
C, CI
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
OFF State Leakage Current ..........AC ≅ 5mA @ 240VAC; DC ≅ 1mA
Counter Output .................... Output pulse width: 300ms ±20%
Time Delay/Counts Variable 7 & 8
Protection
Circuitry ..........................Encapsulated
Dielectric Breakdown ...................
Insulation Resistance ................ ≥ 100 MΩ
Polarity ...........................DC units are reverse polarity protected
Mechanical
Mounting .........................
Dimensions ........................ 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination .......................0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature. .... -40° to 60°C / -40° to 85°C
Humidity .......................... 95% relative, non-condensing
Weight ............................≅ 2.4 oz (68 g)
≥ 2000V RMS terminals to mounting surface
Surface mt. with one #10 (M5 x 0.8) screw
Loading...