SSAC KSD2 Digi-Timer Catalog Page

Dedicated

timers

Interval

KSD2 Digi-Timer
Timing Module

Description

The KSD2 Series is designed for general purpose commercial and industrial applications where a small, cost
effective, reliable solid state timer is required. The factory calibration for xed time delays is within 5% of the
target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series
is designed for input voltages of 24, 120 or 230 volts AC. Time delays of 0.1 seconds to 1000 minutes are
available in 6 ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and
encapsulated to protect the electronic circuitry. An excellent choice for most OEM pulse shaping, maximum
run time, and other process control applications.

Fixed or Adjustable Delays

from 0.1 s ... 1000 m
+/-0.5% Repeat Accuracy
+/- 5% Factory Calibration
24, 120, or 230 V AC
1 A Solid State Output
Encapsulated

Approvals:

Operation

Upon application of input voltage, the time delay
begins. The output energizes during the time delay. At
the end of the time delay, the output de-energizes and
remains de-energized until input voltage is removed.
Reset: Removing input voltage resets the time delay
and the output.

Connection

Function

Interval

V = Voltage L = Load R = Reset
TD = Time Delay

= Undened time

Accessories

B

→

DIN rail adaptor
P/N: P1023-20

See accessory pages for
specications.

5.120

SSAC, LLC. • 800-377-7722 • [e-mail] • [e-mail] • www.ssac.com

• denotes a preferred product

External adjust
potentiometer

A

P/Ns:

P1004-95 (g A)
P1004-95-X (g B)

Mounting bracket
P/N: P1023-6

Female quick
connect
P/N:

P1015-64

Quick connect to
screw adaptor
P/N: P1015-18

Versa-knob
P/N: P0700-7

(AWG 14/16)

DIN rail P/Ns:
C103PM (Al)

←

RT is used when external adjustment is ordered.

Dashed lines are internal connections.

Available Models-

KSD2211M KSD2214M KSD2221
KSD2413M KSD24160M KSD2420
KSD2430

Don’t see what you need? Call us for a minimum quantity and price quote!

Ordering Table

KSD2 X X X

Series Input Voltage Adjustment Time Delay*
–2 - 24 V AC –1 - –0 - 0.1 … 10 s
–4 - 120 V AC –2 - –1 - 1 … 100 s
–6 - 230 V AC –2 - 10 … 1000 s
–3 - –3 - 0.1 … 10 m

–4 - 1 … 100 m
–5 - 10 … 1000 m

Example P/N: KSD2421 Fixed – KSD2410.5S

Fixed
External
Adjust
Onboard
Adjust

*If Fixed Delay is selected,
insert delay [0.1 ... 1000]
followed by (S) secs. or (M)
mins.

KSD2Gen 09.10

Interval

KSD2 Digi-Timer
Timing Module

Technical Data

Time Delay

Range 0.1 s ... 1000 m in 6 adjustable ranges or xed
Repeat Accuracy +/-0.5% or 20 ms, whichever is greater
Tolerance (Factory Calibration) ≤ +/-5%
Reset Time ≤ 150 ms
Time Delay vs. Temperature & Voltage ≤ +/-10%

Input

Voltage 24, 120, or 230 V AC
Tolerance +/-20%
Line Frequency 50 ... 60 Hz
Power Consumption ≤ 2 VA

Output

Type Solid state
Form Normally Open, closed during timing
Maximum Load Current 1 A steady state, 10 A inrush at 60°C
OFF State Leakage Current ≅ 5 mA at 230 V AC
Voltage Drop ≅ 2.5 V at 1 A

Protection

Circuitry Encapsulated
Dielectric Breakdown ≥ 2000 V RMS terminals to mounting surface
Insulation Resistance ≥ 100 MΩ

Mechanical

Mounting Surface mount with one #10 (M5 x 0.8) screw
Package 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination 0.25 in. (6.35 mm) male quick connect terminals

Environmental

Operating Temperature -40°C ... +60°C
Storage Temperature -40°C ... +85°C
Humidity 95% relative, non-condensing
Weight ≅ 2.4 oz (68 g)

Dedicated

timers

KSD2Gen 09.10

Mechanical ViewExternal Resistance vs Time Delay

Fixed & External Adjust

Onboard Adjust

Inches (Millimeters)

5.121

SSAC, LLC. • 800-377-7722 • [e-mail] • [e-mail] • www.ssac.com

• denotes a preferred product