SSAC FSU1000 Series Catalog Page

Universal FlasherUniversal Flasher

Universal Flasher

Universal FlasherUniversal Flasher
FSU1000 Series
Solid State Flasher

All Solid State – No Moving
Parts or Contacts
Onboard Adjustable Flash

Rate

Loads up to 20 A
High Inrush – Up to 200 A
Universal Voltage –
24 ... 240 V AC

Approvals:

DescriptionDescription

Description

DescriptionDescription

The FSU1000 incorporates an onboard adjustable
flash rate of 10 to 100 flashes per minute and a
universal input voltage in one device. Its circuitry is
encapsulated and is capable of controlling loads of
up to 20 A. The versatility of the FSU1000 makes it
ideal for applications where various flash rates and
operating voltages are required.

ConnectionConnection

Connection

ConnectionConnection

Dashed lines are internal connections.

OperationOperation

Operation

OperationOperation

When input voltage is applied to terminal 2 and the
load (lamp), the load energizes steadily. When input
voltage is applied to terminal 3, the output flashes.

Optional Low Current Switch (S1)Optional Low Current Switch (S1)

Optional Low Current Switch (S1)

Optional Low Current Switch (S1)Optional Low Current Switch (S1)

This low current switch could be a limit switch or
contact. While open, the operator sees the load (lamp)
ON and operating. When the limit switch closes, the
load (lamp) flashes to attract attention.

FunctionFunction

Function

FunctionFunction

Flasher NC

V = Voltage S1 = Initiate Switch L = Load
R = Reset T1 = ON Time T2 = OFF Time

Mechanical View Mechanical View

Mechanical View

Mechanical View Mechanical View

T1 ≅ T2

Inches
(Millimeters)

AccessoriesAccessories

Accessories

AccessoriesAccessories

Female quick connect
P/Ns:
P1015-13P1015-13

P1015-13

(AWG 10/12)

P1015-13P1015-13
P1015-64 P1015-64

P1015-64

(AWG 14/16)

P1015-64 P1015-64
P1015-14 P1015-14

P1015-14

(AWG 18/22)

P1015-14 P1015-14

Quick connect to
screw adaptor

P1015-18P1015-18

P/N:

P1015-18

P1015-18P1015-18

See accessory pages for
specifications.

OrOr

dering Tdering T

Or

dering T

OrOr

dering Tdering T

Inrush RatingInrush Rating

Inrush Rating

Inrush RatingInrush Rating

10 A
60 A
100 A
200 A

TT

echnical Dataechnical Data

T

echnical Data

TT

echnical Dataechnical Data

Operation ON/OFF recycling solid state flasher (continuous duty)
Flash Rate Adjustable 10 ... 100 FPM
ON/OFF Ratio ≅ 50%

InputInput

Input

InputInput

Range/Frequency 24 ... 240 V AC/ 50 ... 60 Hz

OutputOutput

Output

OutputOutput

Load Type Inductive, resistive, or incandescent
Maximum Load Rating 1, 6, 10, or 20 A steady state
Inrush 10 times steady state current

MechanicalMechanical

Mechanical

MechanicalMechanical

Mounting * Surface mount with one #10 (M5 x 0.8) screw
Termination 0.25 in. (6.35 mm) male quick connect terminals

ProtectionProtection

Protection

ProtectionProtection

Circuitry Encapsulated

EnvironmentalEnvironmental

Environmental

EnvironmentalEnvironmental

Operating Temperature -20°C ... +60°C (240 V AC +50°C)
Storage Temperature -40°C ... +85°C
Weight 1 A units: ≅ 2.4 oz (68 g)

*Units rated > 6 A must be bolted to a metal surface using the included heat sink compound. The maximum
mounting surface temperature is 90°C.

ableable

able

ableable

RatingRating

Rating

RatingRating

1 A
6 A
10 A
20 A

Part NumberPart Number

Part Number

Part NumberPart Number

FSU1000
FSU1003
FSU1004
FSU1005

> 6 A units: ≅ 3.9 oz (111 g)

FSU11B01 06.09 .0 4

6.2

Low Voltage Products & Systems