SRS Light Design DST8-DIN Series, DST8-3-DIN, DST8-C-DIN, DST8-5-DIN Instruction Manual

Technical data

Mains input:

AC 100-255V /50-60Hz/ 15W

DMX Input / Output:

8x USITT DMX512 /RS485/ isolated to 1000V, amplified

Size/Weight:

Metal box with powder coating: 240x100x135mm /without accessories/

1.7 kg

Mounting points:

DIN rail holder located on the rear side
M10x20 C-clamp holder point
M6 securing eye holder point

Package consist of:

DST8-DIN + DIN terminal holder

1.5m Unischuko to PowerCon cable
Wall-mount holders with screws

Temperature of use:

-10 ºC…+45 ºC

Warranty:

Two-year /24-month/ warranty

DECLARATION OF CONFORMITY

According to guidelines 89/336 EEC and 92/31 EEC:

Name of producer: SRS Light Design s.r.o.

Address of producer: Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic

Declares that the product

Name of product: DST 8-way DMX Splitter
Type: DST8-DIN

Corresponds to the following product specifications:

Safety: EN60065, resp. EN 60950
EMC: EN55103-1, resp. EN55103-2

Bratislava, November 10, 2011 Robert Sloboda

DST8-DIN

8-way DMX Splitter

Instruction Manual

Model:
DST8-3-DIN 3-pin DMX connectors
DST8-5-DIN 5 pin DMX connectors
DST8-C-DIN Mixed DMX connectors

ATTENTION!

This instruction manual contains important information about
the installation and the use of equipment. Please read and
follow these instructions carefully. Always ensure that the
power to equipment is disconnected before opening the
equipment or commencing any maintenance work.

SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic
tel:[phone], fax:[phone], www.srslight.com , [e-mail]