SRS Light Design DST4-3, DST4-C, DST4-5 Instruction Manual
Technical data
Main input:
AC 100-255V / 50-60Hz / 5W
Battery input:
AC/DC12-24V / 5W
DMX Input / Output:
4x USITT DMX512 /RS485/ isolated up to 1000V
Maximum of: 4x 32 devices per one splitter output
Cable length: max: 4x 1200m
Size/Weight:
Metal box with powder coating: 234x154x62mm, 1.7kg
Mounting points:
Located symmetrically on base plate, 8mm wide hole for securing line
Grid of mounting points: 222x78mm, 4 x rubber feet on bottom
Temperature of use:
-10
ºC /
+45 ºC
Warranty:
Two Years /24 months/ warranty
Name of producer: SRS Light Design s.r.o.
Address of producer: Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic
Declares that the product
Name of product: DST4 way DMX splitter
Type: DST4
Corresponds to the following product specifications:
Safety: EN60065, resp. EN 60950
EMC: EN55103-1, resp. EN55103-2
Bratislava, 10th of May 2011
Robert Sloboda
DECLARATION OF CONFORMITY
According to guidelines 89/336 EEC and 92/31 EEC:
DST 4 way DMX splitter
Instruction Manual
Model:
DST4-3 3 pin DMX connectors
DST4-5 5 pin DMX connectors
DST4-C mixed DMX connectors
version2 with AC/DC battery power
ATTENTION!
This instruction manual contains important information about
the installation and use of equipment. Please read and follow
these instructions carefully. Always ensure that the power to
equipment is disconnected before opening the equipment or
commencing any maintenance work.
SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic
tel:+421244681417, fax:+421244681419, www.srslight.com , sales@srslight.com
Loading...