SR Scales SRV947IFS Operating And Service Manual

Model SRV947IFS 24 X 48 Remote Display Platform Scale

SRV947IFS

REMOTE DISPLAY

PLATFORM SCALE

Operating and Service

Manual

Operating and Service Manual
Part No.: MAN947IFS_160129 Page 1 of 12

S

by SR Instruments, Inc.

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2016 SInstruments, Inc.

Model SRV947IFS 24 X 48 Remote Display Platform Scale
Operating and Service Manual
Part No.: MAN947IFS_160129 Page 2 of 12

TABLE OF CONTENTS

TABLE OF FIGURES ......................................................................................................................2

PACKING CHECKLIST – MODEL SRV947IFS ........................................................................3

ASSEMBLY.......................................................................................................................................4

REPLACEMENT PARTS AND ACCESSORIES ........................................................................5

SYSTEM DESCRIPTION AND INTENDED USE .......................................................................5

MAINTENANCE AND CLEANING ..............................................................................................6

STORAGE AND TRANSPORTATION ........................................................................................6

SPECIFICATIONS...........................................................................................................................7

BUTTON FUNCTIONS ...................................................................................................................8

BASIC SYSTEM OPERATION ......................................................................................................9

CALIBRATION ..............................................................................................................................10

TROUBLESHOOTING .................................................................................................................10

WARRANTY...................................................................................................................................11

TABLE OF FIGURES

Figure 1: Wall Box Assembly/Conduit Placement ....................................................................... 4

Figure 2: Concrete Fill.................................................................................................................... 4

Figure 3: Button Display ................................................................................................................ 8

Figure 4: Calibration Table ......................................................................................................... 10

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2016 SInstruments, Inc.

Model SRV947IFS 24 X 48 Remote Display Platform Scale



DESCRIPTION

QUANTITY

PLATFORM PIT FRAME ASSEMBLY

1 ea

FRONT PANEL/WALL BOX ASSEMBLY

1 ea

SIGNAL CABLE ASSEMBLY

1 ea

CONDUIT

1 ea

CALIBRATION CERTIFICATE

1 ea

WARRANTY CARD

1 ea

MANUAL

1 ea

Operating and Service Manual
Part No.: MAN947IFS_160129 Page 3 of 12

PACKING CHECKLIST – Model SRV947IFS

Portable Platform Scale

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2016 SInstruments, Inc.

Model SRV947IFS 24 X 48 Remote Display Platform Scale

Figure 1: Wall Box Assembly/Conduit

Placement

Figure 2: Concrete Fill

Operating and Service Manual
Part No.: MAN947IFS_160129 Page 4 of 12

ASSEMBLY

STEP 1: Unpack the scale system and check parts

against the PACKING CHECKLIST. If there are
any missing or damaged parts, please call the Service
Hotline at: 1-800-654-6360.

STEP 2: Verify that the serial number on the label of
Wall Box Display matches that on Platform Base.

STEP 3: (Figure 1) Mount Wall Box Display into
wall and run the conduit, with connector cable inside,
down through wall and into pit as shown.

STEP 4: Prepare pit area to accept the Scale
Frame. It is recommended that a properly
plumbed drain be installed in the center of pit to
avoid any water buildup that might damage scale.

STEP 5: Center the Scale Frame in the pit.
STEP 6: (Figure 2) Back fill around the perimeter of the Pit Frame Assembly with 3000PSI concrete.

Trowel the concrete level with the scale frame and existing floor. Trowel the base of the pit level with
the base of the frame with a gradient toward the centered drain, if used. Conduit and cable should be left
free so cable can be easily connected to the Platform Assembly.

STEP 7: When the concrete has set, connect the Cable Assembly to
the mating connector on the Platform Assembly.

STEP 8: Carefully lower the Platform Assembly into the Pit Frame
Assembly. Ensure that Platform feet set into locators on Pit Frame and that
extra cable does not interfere with platform.

STEP 9: Install building ground wire and green ground wire from Display Front Plate into the
terminal lug in the wall box

STEP 10: Connect signal cable to the mating connector on the Display Front Panel
STEP 11: Connect A/C power wires to the power supply wire leads
STEP 12: Install Front Panel Assembly to the previously mounted Wall Box. Use supplied star

washers and screws. Ensure screws are securely tightened.
STEP 13: Restore power to the display

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2016 SInstruments, Inc.