SR Scales SR565i Operating And Service Manual

Model SR565i Bariatric Stand-On Scale

Serial Numbers: 1000 +

Model SR565

i

Operating and Service Manual - S/N 1000+
Part No. MAN565i_130314 Page 1 of 20

S

by S Instruments, Inc.

Operating and Service

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2013 SInstruments, Inc.

Bariatric Stand-On Scale

Manual

Model SR565i Bariatric Stand-On Scale
Operating and Service Manual - S/N 1000+
Part No. MAN565i_130314 Page 2 of 20

TABLE OF CONTENTS

TABLE OF FIGURES ......................................................................................................................2

PACKING CHECKLIST .................................................................................................................3

ASSEMBLY.......................................................................................................................................4

REPLACEMENT PARTS AND ACCESSORIES ........................................................................6

SYSTEM DESCRIPTION AND INTENDED USE .......................................................................6

MAINTENANCE AND CLEANING ..............................................................................................7

STORAGE AND TRANSPORTATION ........................................................................................7

SPECIFICATIONS...........................................................................................................................8

BUTTON FUNCTIONS ...................................................................................................................9

BASIC SYSTEM OPERATION ....................................................................................................10

BATTERY REPLACEMENT .......................................................................................................12

THEORY OF OPERATION .........................................................................................................13

CALIBRATION ..............................................................................................................................14

CONFIGURING SEND BUTTON ................................................................................................16

TROUBLESHOOTING .................................................................................................................17

WARRANTY...................................................................................................................................18

TABLE OF FIGURES

Figure 1: Scale Assembly Diagram ............................................................................................... 4

Figure 2: Display Cable Connector and Battery Compartment ................................................ 4

Figure 3: Printer Mast Bracket ..................................................................................................... 5

Figure 4: Printer Mounting Bracket ............................................................................................. 5

Figure 5: Button Display ................................................................................................................ 9

Figure 6: Battery Compartment .................................................................................................. 12

Figure 7: Calibration Tolerance Table ....................................................................................... 14

Figure 8: Calibration Switch Diagram ....................................................................................... 14

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2013 SInstruments, Inc.

Model SR565i Bariatric Stand-On Scale

√√√√

Operating and Service Manual - S/N 1000+
Part No. MAN565i_130314 Page 3 of 20

PACKING CHECKLIST

DESCRIPTION QUANTITY

Box 1

BASE ASSEMBLY 1 ea

MAST ASSEMBLY with DISPLAY and HEIGHT BAR 1 ea

DISPLAY UNIT WITH CABLE 1 ea

PACKAGE OF SIX (6) “D” CELL BATTERIES 1 ea

3/8-16 FLAT HEAD SCREWS 4 ea

CALIBRATION CERTIFICATE 1 ea

WARRANTY CARD 1 ea

MANUAL 1 ea

Box 2 Optional Printer Kit

PRINTER 1 ea

PRINTER BATTERY CHARGER 1 ea

PRINTER CABLE 1 ea

PRINTER MAST BRACKET & HARDWARE 1 ea

PRINTER MOUNTING BRACKET & HARDWARE 1 ea

PRINTER PAPER 1 ea

LOCTITE

1 ea

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2013 SInstruments, Inc.

Model SR565i Bariatric Stand-On Scale
Operating and Service Manual - S/N 1000+
Part No. MAN565i_130314 Page 4 of 20

ASSEMBLY

5

9

1

7

8

3

4

Cable
Hole

STEP 1: Unpack the scale system and check parts
against the PACKING CHECKLIST. If there are any
missing or damaged parts, please call the Service
Hotline: [phone].

# PART NAME

1

Mast Assembly

2

Base Assembly

3

Height Bar

4

3/8-16 Screws

5

Display Unit

6

Display Cable Connector

7

Printer (optional)

8

Printer Mounting Bracket (optional)

9

Printer Cable (optional)

2

STEP 2: (Figure 1) Position the Mast Assembly (1)

into the Base Assembly (2) as shown, while feeding the
display cable through the cable hole on the right.
Ensure the Height Bar (3) seats correctly in the Base
Assembly.

STEP 3: (Figure 1) Insert the four (4) 3/8-16 screws (4)
into the holes in Mast Assembly and Base Assembly as
indicated. Secure the Mast Assembly by tightening the
screws into Base Assembly.

Figure 1: Scale Assembly Diagram

STEP 4 : Gently rest the scale on its side. Verify that the

serial number on the bottom of the Display Unit (5) matches
that on the Battery Compartment Cover; located on the Base
Assembly between the wheels.

STEP 5: Loosen the four (4) screws in the Battery
Compartment Cover and remove the cover.

Figure 2: Display Cable Connector and

Battery Compartment

6

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2013 SInstruments, Inc.

Continued next page

Model SR565i Bariatric Stand-On Scale
Operating and Service Manual - S/N 1000+
Part No. MAN565i_130314 Page 5 of 20

ASSEMBLY Cont’d

STEP 6: Attach the Display Cable Connector (6) to its mate in the Base Assembly. Slide the extra

cable back up into the mast pipe.

STEP 7: Install the six (6) “D” cell batteries as indicated on the Battery Compartment Cover
label. Tightly close the cover.

STEP 8: Return the scale to the upright position.

INSTALLING OPTIONAL PRINTER

STEP 1: Mount the Printer Mast Bracket (8) to the rear of the Mast Assembly (1) using the two

(2) mounting screws provided. NOTE: The three holes on the Printer Mast Bracket should be
towards the top of the Mast (figure 3).

STEP 2: Apply a small amount of Loctite to the three (3) small screws provided and attach

the Printer Mounting Bracket to the Printer Mast Bracket (figure 4).

STEP 3: Attach the Printer to the Printer Mounting Bracket by inserting the tabs on the Printer

Mounting Bracket (figure 4) into the slots on the back of the Printer and carefully snap in place.

STEP 4: Plug the Printer Cable into the Printer and into the Display Unit. Tighten the connector

screws into the Display Unit connector.

Figure 3: Printer Mast Bracket

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2013 SInstruments, Inc.

Figure 4: Printer Mounting Bracket

Model SR565i Bariatric Stand-On Scale

WARNING

Operating and Service Manual - S/N 1000+
Part No. MAN565i_130314 Page 6 of 20

REPLACEMENT PARTS and ACCESSORIES

Part # Description

FRAP1300 Printer
FRAP13900BR-01 Printer Mounting Bracket
FRAP1300-D9 Printer Cable
FRAP1300PCC AAA Battery Pack
FRAP1300BP01 Rechargeable Battery Pack
FRBC1300 Printer Battery Charger
FRTP130012C Paper, thermal printer 58mm (10 Rolls)
MF8205 Printer Mast Bracket

SYSTEM DESCRIPTION and INTENDED USE

SYSTEM DESCRIPTION

The SR565i Bariatric Stand-On Scale employs the latest in microprocessor and load cell technology
to provide accurate and repeatable weight data. Four (4) identically matched transducers are
strategically placed to ensure an accurate representation of the patient’s weight.

The low power microprocessor circuitry allows the SR565i to derive its power from six (6)
common “D” cell batteries, which will provide up to 400 hours of weight readings before needing
replacement. This eliminates the need for an external battery charger or the danger of an AC
power supply cord on a portable scale.

The patient’s weight is displayed on a 16-character dot matrix LCD. The weight data may be viewed
in either pounds or kilograms with a displayed resolution of 0.1 for each.

INTENDED USE

The SR565i Bariatric Stand-On Scale is specifically
designed for use as a portable patient weighing system
for ambulatory and non-ambulatory wheelchair bound
patients or those that need to be supported by a chair or
walker. Maximum weight capacity must not exceed

MAXIMUM WEIGHT LIMIT OF

DO NOT EXCEED

1000 LB / 454 KG

1000 pounds or 454 kilograms gross weight.

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: [phone] Fax: [phone] URL: www.srscales.com

email: [e-mail] Copyright 2013 SInstruments, Inc.