SRAM QOLL1, QOLL2 Users Manual

Qollector

Charging Port

Power Meter
Indicator

Heart Rate
Indicator

Other Ant+
Indicator

Q Buon

Cellular Status

GPS Status

Baery Statuss

Front Surfaces

Commands

Press - 3 Sec

Press and hold the for three seconds to power
the Qollector on or off. When powering on, the status
icons will light up green and the Qollector will beep
and vibrate. When powering off, the icons will flash
red and the Qollector will beep and vibrate.

To pair the Qollector with a sensor, press and release
the and hold the Qollector near the sensor. The
corresponding white icon will light up when the
sensor is paired. Up to 7 sensors can be paired with
the Qollector.

Press the to check the Cellular Status, Baery
Status, and GPS Status. The will blink oen when
on and connected.

Double tap the front surface of the device to drop a
pin and record a specific point in your activity. You
can view the pin in your autosync destinations.

Press

Double Tap

Using the Qollector

The Qollector will collect and store data when it is first turned on, but
you will need to create an account on QuarqNet.com to view, download
and sync your data.

To Start or Finish an Activity: Power the Qollector on and allow the
cellular towers and GPS to sync before starting your activity. When you
have finished your activity, power the Qollector off. Your activity will
automatically be named and synced up with your autosync
destinations.

For complete instructions, visit our website at
quarq.com/qollector.

Color Definitions

Solid Light: Connected to a tower - Data synced

Two second fade: Connected to a tower - Data unsynced

One second fade: No tower found

Solid Light: GPS locked

Two second fade: GPS searching

One second fade: GPS disabled

Solid Light: Baery Status Good: 100% - 35%

Two second fade: Baery Status Low: 35% - 10%

One second fade: Baery Status Critical: 10% or less

Power Meter Paired

Heart Rate Monitor Paired

Ant+ Device Paired

For complete instructions, visit our website at quarq.com/qollector.

Data collection and tracking

for endurance athletes.

DRAFT

Qollector

Quick Start Guide