Square Jellyfish PKTRIP73 User manual

SQUARE JELLYFISH POCKET TRIPOD USER’S MANUAL

Thank you for purchasing the new Square Jellysh Pocket Tripod. This

product can be used with any pocket camera with a threaded hole for tripod
mount. Using the unique shape of the Pocket Tripod, your camera can

be positioned at many dierent angles while holding your camera steady
enough to take a picture. There are a few specic guidelines that you should

follow to make sure that no damage occurs to your camera.

It’s about balance

• First, select a good location to place your Pocket Tripod.
This can be even surface such as a desk, bench or oor.

Make certain the Pocket Tripod is surrounded by a mini­mum 12” radius area.

12”

• Loosely mount your camera to the Pocket Tripod screw
and then hold and slide your camera in the slot to nd the

angle you desire. Gently let go to ensure your camera balances independently

before letting go. If necessary, select a slightly dierent angle for your camera.

• Finger-tighten the screw to hold your camera securely.

GOOD

Pocket Tripod is placed

on large, even surface.

GOOD

Camera is balanced properly

and will not tip.

Camera is balanced properly

GOOD

Camera is balanced properly

and will not tip.

GOOD

and will not tip.

Use common sense

• The Square Jellysh Pocket Tripod

is designed to hold the camera
steady while taking a picture. It is not
designed to be mounted to a moving
object or vehicle.

• Do not place your camera and

Pocket Tripod where it can easily fall
a distance that would cause damage
to your camera. A small railing and

the edge of a cli are just a few

examples that come to mind.

• This product contains small parts

that may be a chocking hazard.
Keep out of reach of children.

GOOD

Camera is balanced properly

and will not tip.

WRONG

Camera is not balanced and

will tip forward.

www.squarejellysh.com

Designed in USA. Made in China. Patent pending.

SQUARE JELLYFISH POCKET TRIPOD PRODUCT WARRANTY

WARNING

The Pocket Tripod is designed to hold your compact
camera in place without the need for a large,
traditional tripod. Be careful when positioning your
camera so that it does not fall over. The Pocket Tripod

must be placed on a at, level surface strong enough

to support the camera, and you must take care to
make sure that the camera remains balanced after it is
aimed. This device is designed to support lightweight,

compact cameras, and not heavy cameras, SLRs, or

any camera with a lengthy lens or similar extension.
Always support the camera with one hand while you
are tightening it in place with the other hand. While still
supporting it, wiggle the camera a bit to make sure
that it will not tip over when you release it, because
this might damage your camera! Only you can make a
safe evaluation of whether your camera is secure and

balanced because of the innite number of settings

which you may choose.

LIMITED WARRANTY

The Pocket Tripod is warranted against defects in
materials and workmanship for a period of ONE (1)

YEAR from the date of the original retail purchase. If

a defect exists the manufacturer will, at its option and
to the extent permitted by law, (1) repair the product

at no charge using new or refurbished parts; or (2)
exchange the product with a functionally equivalent
product that is new or refurbished; or (3) refund
the original purchase price. This warranty excludes

damage resulting from abuse, accident, modications

or other causes that are not defects in the materials or
workmanship. To the extent permitted by applicable
law, the manufacturer is not liable for any direct,
indirect, incidental or consequential damage arising
out of the use of service of the product, including, but
not limited to damage which may be caused to any
camera, or to any other device the Pocket Tripod is
used to support. To the extent permitted by applicable
law the manufacturer of the Pocket Tripod disclaims

all implied warranties of merchantability and tness

for a particular purpose. If implied warranties cannot
be disclaimed, then such warranties are limited in
duration to the duration of this warranty. This warranty

gives you specic legal rights, and you may have other

rights which vary from state to state.

To obtain warranty service, contact Square

Jellysh using the information provided at
www.squarejellysh.com

To the extent permitted by applicable law proof
of purchase for all warranty repairs/replacement
is required.

www.squarejellysh.com

Designed in USA. Made in China. Patent pending.