Square Jellyfish JELLY-GRIP TRIPOD MOUNT WITH JELLY LONG LEGS User Manual
squarejellyfish.com
User’s Manual
JELLY-GRIP
TRIPOD MOUNT
WITH JELLY LONG LEGS
The Jelly-Grip Tripod Mount
with Jelly Long Legs is designed
to support smartphones and
similar flat and thin devices
having a weight of not more
than 8 ounces. It is not designed
for, and it may not support
devices with extended or
extendable lenses or similar
projections. An infinite number
of configurations may be used
to secure any particular device,
and the manufacturer cannot
be responsible for the method
you select. In all instances the
user will be solely responsible
for determining that a particular
device is secure and well
balanced in the Jelly-Grip Tripod
Mount and Jelly Long Legs, and
that the Jelly-Grip Tripod Mount
is properly axed to the Jelly
Long Legs tripod or similar,
secure base, because damage
to the smartphone or similar
device should be expected if an
improper configuration is used.
WARNING
This Jelly-Grip Tripod Mount with
Jelly Long Legs is warranted
against defects in materials
and workmanship for a period
of one (1) year from the date of
the original retail purchase. If a
defect exists, Square Jellyfish
will, at its option and to the
extent permitted by law, (1)
repair the product at no charge
using new or refurbished parts;
or (2) exchange the product with
a functionally equivalent product
that is new or refurbished; or
(3) refund the original purchase
price.
This warranty excludes damage
resulting from abuse, accident,
modifications, or other causes
that are not defects in the
materials or workmanship. To the
extent permitted by applicable
law, the manufacturer is not liable
for any direct, indirect, incidental,
or consequential damage arising
out of the use or service of the
product, including, but not
limited to damage which may
be caused to any smartphone,
electronic device, or other device
utilized in conjunction with the
Jelly-Grip Tripod Mount and
Jelly Long Legs. To the extent
permitted by applicable law the
manufacturer of the Jelly-Grip
Tripod Mount with Jelly Long
Legs disclaims all implied and
statutory warranties, including
warranties of merchantability
and fitness for a particular
purpose. If implied warranties
cannot be disclaimed, then such
warranties are limited in duration
to the duration of this warranty.
This warranty gives you specific
legal rights, and you may have
other rights which vary from
state to state.
To obtain warranty service
contact Square Jellyfish using
the information provided at
www.squarejellyfish.com.
To the extent permitted by
applicable law Jelly-Grip Tripod
Mount with Jelly Long Legs will
require proof of purchase for all
warranty repairs or replacement.
LIMITED WARRANTY
Do not carry the tripod
and mount with your
smartphone installed. First
remove your smartphone
before moving the tripod.
This product is designed to
hold a smartphone steady
while taking a picture.
It is not designed to be
mounted to or balanced on
a moving object or vehicle.
This product contains small
parts that may be a choking
hazard. Keep out of reach of
children.
USE COMMON SENSE
iPhone is a registered trademark of Apple, Inc.
1
2
3
4
6
5
SET UP YOUR JELLY LONG LEGS TRIPOD
To use the Jelly Long Legs tripod, simply screw the
folded tripod onto the Jelly-Grip Tripod Mount. Once
attached, unfold the legs to their full position.
Confirm that the set-screw is tightened and place the
tripod on any level surface of your choosing.
Alternatively, for
uneven surfaces,
the legs of the
tripod may be
individually
adjusted
for uneven
surfaces. Using
a screwdriver,
loosen the setscrew, adjust each
leg ad desired,
and retighten the
set-screw.
1 Spring Mount Claws: Securely
holds smartphones up to 6” in
diagonal
2 Ball Joint: Securely supports
smartphones in multitude of
angles
3 Mounting Arm: Balances
smartphone directly over tripod
for remarkable balance
4 ¼ x 20 Threaded Mount:
One-point attachment for any
standard tripod
5 3 ¾” Tripod Legs with
Non-Slip Grips: Tripod
holds strong on a variety of
surfaces. Legs fold for easy
portability
6 Tripod Leg Set Screw:
Position tripod legs
individually if desired
iPhone
sold seperately
JELLY-GRIP
TRIPOD MOUNT
WITH JELLY LONG LEGS
POSITION YOUR SMARTPHONE
Rotate your smartphone into any number of positions
via the Ball Joint. The joint is designed to securely
hold the smartphone in any position it is placed.
The Ball Joint has an adjustable knob allowing you
the flexibility to adjust the tension, if desired.
YOU’RE READY TO TAKE A PICTURE
With this simple two-step set-up you can be ready to
take photos or use FaceTime in a matter of seconds:
1. Mount smartphone
2. Position smartphone
There’s no need to miss out on a great photo
opportunity ever again.
Set-screw
ATTACH YOUR
SMARTPHONE
Jelly-Grip Tripod
Mount is designed to
hold a smartphone up
to 6” in diagonal.
Flip each of the Jelly-
Grip Spring Mount
Claws open forming
90 degree angles with
the rest of the claw
assembly.
Gently pull the claws
in opposite directions
until your smartphone
easily slides into
place. Release claws.
Tension will hold your
smartphone securely
in the mount.
90°
90°
Loading...