Square D RM35JA31MW Data Sheet

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Product data sheet
RM35JA31MW
current control relay RM35-J - range 2..500 mA
Main
Range of product Zelio Control
Product or component type
Relay type Current control relay
Relay name RM35JA
Relay monitored pa­rameters
Time delay Adjustable 0.3...30 s, 0 + 10 % on crossing the
Switching capacity in VA
Minimum switching cur­rent
Maximum switching current
Power consumption in VA
Measurement range 50...500 mA E3-M terminals
Utilisation category DC-14 conforming to IEC 60947-5-1
Modular measurement and control relays
Overcurrent or undercurrent detection Overcurrent or undercurrent in window mode
threshold Tt Adjustable 1...20 s, 0 + 10 % on energisation Ti
1250 VA
10 mA at 5 V DC
5 A AC
<= 3.5 VA AC
2...500 mA current
2...20 mA E1-M terminals
10...100 mA E2-M terminals
DC-13 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-12 conforming to IEC 60947-5-1
Complementary
Reset time 1500 ms for time delay
Maximum switching voltage 250 V AC
[Us] rated supply voltage 24...240 V AC/DC, 50/60 Hz +/- 10 %
Supply voltage limits 20.4...264 V AC/DC
Operating voltage tolerance - 15 % + 10 % Un
Power consumption in W <= 0.6 W DC
Control circuit frequency 40...70 Hz +/- 10 %
Resistance across terminals 0.2 Ohm E3-M terminals
Output contacts 2 C/O
Nominal output current 5 A
Measuring cycle <= 30 ms measurement cycle as true rms value
Hysteresis 5...50 % of threshold setting
Delay at power up 0.3 s
Measurement accuracy +/- 10 % of the full scale value
Repeat accuracy +/- 2 % for time delay
Measurement error 1 by volt over the whole range with voltage variation
Polarity No DC
Threshold setting 10...100 %
5 Ohm E1-M terminals 1 Ohm E2-M terminals
+/- 0.5 % for input and measurement circuit
0.05 %/°C with temperature variation
Oct 13, 2015
1
Marking CE : 73/23/EEC
Overvoltage category III conforming to IEC 60664-1
Insulation resistance > 500 MOhm at 500 V DC conforming to IEC 60664-1
[Ui] rated insulation voltage 250 V conforming to IEC 60664-1
Insulation Between supply and measurement
Operating position Any position without derating
Connections - terminals Screw terminals 2 x 0.2...2 x 1.5 mm² - AWG 24...AWG 16, flexible cable with ca-
Tightening torque 0.6...1 N.m conforming to IEC 60947-1
Housing material Self-extinguishing plastic
Local signalling LED yellow for relay ON
Mounting support 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Electrical durability 100000 cycles
Mechanical durability 30000000 cycles
Operating rate <= 360 operations/hour under full load
Contacts material Cadmium free
Width 35 mm
Product weight 0.13 kg
CE : EMC 89/336/EEC
> 500 MOhm at 500 V DC conforming to IEC 60255-5
ble end Screw terminals 1 x 0.2...1 x 2.5 mm² - AWG 24...AWG 12, flexible cable with ca­ble end Screw terminals 2 x 0.5...2 x 2.5 mm² - AWG 20...AWG 14, solid cable without cable end Screw terminals 1 x 0.5...1 x 4 mm² - AWG 20...AWG 11, solid cable without ca­ble end
LED green for power ON
Environment
Immunity to microbreaks 50 ms
Electromagnetic compatibility Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Standards EN/IEC 60255-6
Product certifications CSA
Ambient air temperature for storage -40...70 °C
Ambient air temperature for operation -20...50 °C
Relative humidity 95 % at 55 °C conforming to IEC 60068-2-30
Vibration resistance 1 gn (f = 57.6...150 Hz) conforming to IEC 60255-21-1
Shock resistance 15 gn for 11 ms conforming to IEC 60255-21-1
IP degree of protection IP30 (casing) conforming to IEC 60529
Pollution degree 3 conforming to IEC 60664-1
Dielectric test voltage 2 kV AC 50 Hz, 1 min conforming to IEC 60664-1
Non-dissipating shock wave 4 kV conforming to IEC 61000-4-5
Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3 Emission standard for industrial environments conforming to EN/IEC 61000-6-4
C-Tick GL GOST UL
0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-6
IP20 (terminals) conforming to IEC 60529
2 kV AC 50 Hz, 1 min conforming to IEC 60255-5
4 kV conforming to IEC 60664-1 4 kV conforming to IEC 60255-5
2
Loading...
+ 3 hidden pages