NSYTRV screw technology terminal blocks are components that are well established throughout
the world and are suitable for the vast majority of connection applications, due to their wide range
of functions and connection possibilities.
NSYTRV terminal blocks ensure quality, safety and the operational availability of equipment.
In addition to these advantages, they optimise the setting up and operation of installations,
due to their simplicity and integrated functions.
Material properties
All metal parts of the screw terminal blocks (screw, cage and bar) are made of high grade, non
corrosive copper alloys. This eliminates the risk of rusting and associated consequences, such
as unreliable electrical contacts and/or jammed screws.
The good electrical conductivity insures a low temperature rise.
The surface of the metal parts is protected by a lead free, galvanic nickel or tin plating.
The insulating housings of the NSYTRV terminal blocks are made of halogen free and
UV resistant Polyamide 6.6. This type of plastic has a high impact strength and is exible even
at low temperatures.
Further advantages are the good tropical and termite resistance, high chemical resistance
and the excellent aging characteristics. Polyamide 6.6 is certied for inammability class V0 in
accordance with UL 94 and can be used at operating temperatures between -60°C and +130°C.
Connection functions
b Passthroughb Protective earthb Double deck and Multi-poleb Blade disconnect typeb Disconnect (removable carrier), for diode, resistor or cylindrical fuseb Fused disconnectb Miniature passthroughb Passthrough with Telequick universal footb For neutral conductorsb Lug-lug typeb Lug-clamp type
Mounting accessories
The NSYTR terminal blocks have a uniform range of accessories for all connection technologies.
Bridging, labelling and test accessories are standardized and reduce your logistics costs.
In addition, all the terminal blocks of the range can be freely combined with each other using
the double bridge shaft.
4
Page 5
Linergy connection systems
Terminal blocks
Linergy TR
Introduction
Spring technology
terminal blocks
PB502143
Terminal block type NSYTRR
Principle of spring connection
PB502362PB502408
AZ5 and DZ5 cable ends
See pages 86
Presentation
Spring technology is a type of connection that requires no maintenance and ensures
the separation of mechanical and electrical functions.
NSYTRR spring terminals signicantly reduce wiring time and eliminate the need for regular
re-tightening. This technology allows not only the connection of exible conductors with or
without cable ends, but also of solid conductors with a nominal c.s.a. from 0.13 mm² to 25 mm².
NSYTRR terminal blocks ensure quality, safety and the operational availability of equipment.
In addition to these advantages, they optimise the setting up and operation of installations,
due to their simplicity and integrated functions.
Material properties
All metal parts of the spring-cage terminal blocks are made of non corrosive materials.
The current carrying metals are high grade copper alloys.
The good electrical conductivity insures a low temperature rise.
The contact force for the spring-cage connection is applied by a spring element made of
high strength chromium-nickel spring steel. The surface of the metal parts is protected by a
lead free, galvanic nickel or tin plating.
The insulating housings of the NSYTRR terminal blocks are made of halogen free and
UV resistant Polyamide 6.6 certied for inammability class V0 in accordance with UL 94.
They can be used at operating temperatures between -60°C and +130°C.
Connection functions
Spring technology terminal blocks are simple and fast to install. A at screwdriver is used to open
the connection point, allowing the conductor to be inserted into the cage.
As soon as the screwdriver is pulled out, the contact is automatically made by spring pressure.
The contact force, which is independent to the user, creates a shakeproof and steadfast
long-term connection.
b Passthroughb Protective earthb Double deck and Multi-poleb Blade disconnect typeb Disconnect (removable carrier), for diode, resistor or cylindrical fuseb Miniature passthrough
Mounting accessories
The NSYTR terminal blocks have a uniform range of accessories for all connection technologies.
Bridging, labelling and test accessories are standardized and reduce your logistics costs.
In addition, all the terminal blocks of the range can be freely combined with each other using the
double bridge shaft.
For better contact between the conductor
and the current bar, use a cable end (ferrule) for
all stranded or flexible wires.
5
Page 6
Linergy connection systems
Terminal blocks
50%
faster installation
Linergy TR
Introduction
Push-in technology
terminal blocks
PB502082
PB502409PB502362
Principle of push-in
connection
Terminal block type NSYTRP
Presentation
The new NSYTRP push-in terminal blocks use the most cost effective connection technique
on the market. This technique drastically reduces wiring time and eliminates the need for regular
re-tightening.
The insertion force of the NSYTRP push-in terminal blocks is up to 50% lower*.
This allows easy and direct insertion of solid conductors or exible conductors with cable ends
(ferrules) from 0.34 mm² to 6 mm².
Material properties
All metal parts of the push-in terminal blocks are made of non corrosive materials.
The current carrying metals are high grade copper alloys.
The good electrical conductivity insures a low temperature rise.
The contact force for the push-in connection is applied by a leg spring made of high strength
chromium-nickel spring steel.
The insulating housings of the NSYTRP terminal blocks are made of halogen free and
UV resistant Polyamide 6.6 certied for inammability class V0 in accordance with UL 94.
They can be used at operating temperatures between -60°C and +130°C.
Connection functions
The push-in terminal blocks are made for direct conductor connection. This means that solid
conductors or conductors with cable ends can be directly inserted into the terminal block without
tools.
The special spring contour allows easy insertion of conductors from 0.34 mm² to 6mm² c.s.a.
Smaller cross-section conductors can be connected by actuating the green button before
insertion for 0.14mm² and up.
The contact force, which is independent to the user, creates a shakeproof and steadfast
long-term connection.
b Passthroughb Protective earthb Double deck and Multi-poleb Blade disconnect typeb Disconnect (removable carrier), for diode, resistor or cylindrical fuse
AZ5 and DZ5 cable ends
See pages 86
*50% lower if compared with other direct insertion terminal
blocks from the market.
6
Mounting accessories
The NSYTR terminal blocks have a uniform range of accessories for all connection technologies.
Bridging, labelling and test accessories are standardized and reduce your logistics costs.
In addition, all the terminal blocks of the range can be freely combined with each other using
the double bridge shaft.
For better contact between the conductor
and the current bar, use a cable end (ferrule) for
all stranded or flexible wires.
Page 7
Linergy connection systems
Terminal blocks
Linergy TR
Introduction
PB502411
Snap-on PE foot
Earth terminal blocks are simply snapped onto the DIN rail
to make contact. This mechanically and electrically efcient
connection meets all the requirements of standard IEC
60947-7-2.
PB502354PB502410
Flexible plug-in bridge system
The NSYTRAL* plug-in bridges allow potential distribution
to be implemented quickly. All terminals have two bridge shafts
to make exible chain bridging, step bridging or bridging
between non adjacent terminal blocks possible.
The reducing bridge permits simple connection of terminal
blocks with different nominal cross-sections,
(e.g. an NSYTRV102 terminal with an NSYTRV22 terminal).
This way the power distribution terminal blocks can be quickly
setup.
PB502213
PB502214
PB502215
Vertical bridge
The NSYTRALV24R vertical bridge offers the option of
connecting both levels of the standard double level
NSYTRR24D and NSYTRR44D terminal blocks.
Miniature terminal blocks with maximum usage
Due to its space saving design, mini spring-cage terminal
blocks are ideal for wiring in extremely restricted spaces.
The generous connection space enables fast wiring
of stranded and solid conductors.
They can be mounted on NS 15 DIN rail or directly mounted
using screw ange or engagement pins.
7
Page 8
Linergy connection systems
Terminal blocks
Linergy TR
Introduction
General characteristics
Terminal blocks
TechnologySpringScrewPush-in
TypeNSYTRRNSYTRVNSYTRP
Component materialsInsulating casePolyamide 6.6
Electrical and thermal characteristics of insulating case (polyamide 6.6)
Dielectric strengthConforming to
Dielectric loss
Tan coefcient at 1 MHz
Dielectric constant at 1 MKz3.7
ResistivityConforming to
Surface resistanceConforming to
Creep resistanceConforming to
Ambient air temperature
around the device
Inammability classConforming
Mounting rail characteristics
Mounting rail type
Dimensions
Width x depth x thickness
MaterialSteelSteelSteelSteelSteel
Equivalent c.s.a. in coppermm
Short-circuit current withstandkA1.92334.28.4
Connector and screwHigh grade copper alloys
Commoning linkHigh grade copper alloysSprint elementChromium-nickel spring steel
VDE 0303-T21 and
IEC 60243-1
Conforming to
VDE 0303-T4 and
IEC 60250
VDE 0303-T30 and
IEC 60093
VDE 0303-T30 and
IEC 60093
VDE 0303-T30 and
IEC 60093
Conforming to
VDE 0304-T21 and
IEC 60216-1
to UL 94
kV/mm80/65
0.01
Ω.cm10
Ω10
CTI (kB)500 (>400)
°COperation: -40…+130
Class/mm
thickness
mm35 x 7.5 x 135 x 15 1.535 x 15 x 135 x 15 x 1.535 x 16 x 1.8
2
12
12
V-0/0.8
1625253570
Nominal c.s.a.
and maximum
currents of copper
conductors
(1) Conforming to DIN VDE 0611 part 1/11.77.
8
(1)
Spring technology, screw technology, push-in technology
Reducing bridges enable
the simple connection of standard
terminal blocks of the Linergy TR range
to different nominal cross-sections and
connection technologies.
Power feeds with large cross-sections
can be easily distributed among several
smaller output terminal blocks.
The connection technologies and
the connected cross-sections must be
taken into consideration when selecting
a suitable reducing bridge.
The appropriate reducing bridge
and the maximum permissible bridge
current for a single-sided and central
power feed can be determined using
the adjacent table.
11
Page 12
Linergy connection systems
Terminal blocks
Linergy TR
Introduction
Reduction bridging
with NSYTRR spring
or NSYTRP push-in
terminal blocks
Number of poles 1 - 1 x 1NSYTRV22NSYTRV42NSYTRV62NSYTRV102NSYTRV352NSYTRV952BBNSYTRV22PENSYTRV42PENSYTRV62PENSYTRV162PE
ColoursGrey----
Mounting on
See pages2020202120/2222/23242424/2525
Nominal c.s.a (mm²)2.54610 & 1635 to 7095 & 1502.546 & 1016 to 50
2 - 1 x 1----------
3 - 1 x 1---------
5 - 1 x 1----------
10 - 1 x 1----------
1 - 1 x 2-------NSYTRV43PE--
1 - 2 x 2-------NSYTRV44PE--
With LED----------
3 - 1 x 1-NSYTRV26T--5 - 1 x 1-------DB6CD105--
10 - 1 x 1-------DB6CD110--
1 - 1 x 2NSYTRV43 - --------
1 - 2 x 2NSYTRV44 - --------
With LED---NSYTRV42SF5LD-------
End stopClip-on, 5.2 mm50NSYTRAAB3550NSYTRAAB3550NSYTRAAB35
for 35 mm DIN railWith screw, 9.5 mm50NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV35
End plate,Grey50NSYTRAC2250NSYTRAC2250NSYTRAC2250NSYTRAC2250NSYTRAC162- Included- Included
Blue10-pole10NSYTRAL210BL 10NSYTRAL410BL 10NSYTRAL610BL--------
Grey10-pole10NSYTRAL210GR 10NSYTRAL410GR 10NSYTRAL610GR--------
Step-down bridge, Screw to screw terminal- - - - 10NSYTRALV6210NSYTRALV10210NSYTRALV16210NSYTRALV352- -
down to 2.5/4 mm² Screw to spring trerminal- - - - 10NSYTRALVR6210NSYTRALVR10210NSYTRALVR16210NSYTRALVR352- -
Vertical bridge1-pole- - - - - - - - - - - - - -
Pick-off terminalGrey--------10NSYTRAPT1610NSYTRAPT35--
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT--
Warning labelYellow10NSYTRACS210NSYTRACS410NSYTRACS610NSYTRACS1010NSYTRACS1010NSYTRACS1010NSYTRACS10
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mm Perforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockPassthroughPassthroughPassthroughPassthroughPassthroughPassthroughPassthrough
Type of connection1 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 1
ColourGreyGreyGreyGreyGreyGreyGrey
End stopClip-on, 5.2 mm50NSYTRAAB3550NSYTRAAB35
for 35 mm DIN railWith screw, 9.5 mm50NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV35
End plateGrey-Included- - - - - -
Partition plateGrey- - 10NSYTRAC95210NSYTRAC95210NSYTRAC952
Screw bridge2-pole10NSYTRAL70210NSYTRAL95210NSYTRAL95210NSYTRAL1502
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft- - - - - - - -
CoverGrey- - 10NSYTRACP110NSYTRACP110NSYTRACP2
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockPassthroughPassthrough - lug to lugPassthrough - lug to connectorPassthrough - lug to lug
Type of connection1 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 1
ColorGreyGreyGreyGrey
End stopClip-on, 5.2 mm50NSYTRAAB3550NSYTRAAB3550NSYTRAAB35
for 35 mm DIN railWith screw, 9.5 mm50NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV35
End plate,Grey50NSYTRAC2250NSYTRAC2250NSYTRAC2250NSYTRAC2250NSYTRAC162- Included- Included
width 2.2 mmBlue50NSYTRAC22BL50NSYTRAC22BL50NSYTRAC22BL50NSYTRAC22BL- - - - - -
Partition plate,Grey50NSYTRAP2250NSYTRAP2250NSYTRAP2250NSYTRAP22- - - - - -
width 2 mmBlue50NSYTRAP22BL50NSYTRAP22BL50NSYTRAP22BL50NSYTRAP22BL- - - - - -
Plug-in bridge2-pole50NSYTRAL2250NSYTRAL4210NSYTRAL6210NSYTRAL10210NSYTRAL16210NSYTRAL352- -
Red3-pole50NSYTRAL2350NSYTRAL4310NSYTRAL63- - - - - - - -
Test plugMetalic part, Ø 2.3 mm 10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft 10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow10NSYTRACS210NSYTRACS410NSYTRACS610NSYTRACS1010NSYTRACS1010NSYTRACS1010NSYTRACS10
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockProtective earthProtective earthProtective earthProtective earthProtective earthProtective earthProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 1
ColourGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/Yellow
Sold in lots of Unit referenceSold in lots of Unit referenceSold in lots of Unit referenceSold in lots ofUnit referenceSold in lots ofUnit referenceSold in lots ofUnit referenceSold in lots ofUnit reference
PB502176
UL, CSA, VDE, ATEX, IECEx, GL,
LR, DNV, GOST
PB502175
UL, CSA, VDE, ATEX, IECEx, GL,
LR, DNV, GOST
24
Page 25
Linergy connection systems
Terminal blocks
Linergy TR
Screw terminal blocks
PB502180
47.75565.770.5
76 A101 A125 A150 A
UL, CSA, VDE, ATEX, IECEx, GL,
LR; DNV, GOST
PB502185
UL, CSA, VDE, ATEX, IECEx, GL,
LR, DNV, GOST
PB502177
UL, CSA, VDE, ATEX, IECEx,
GL, GOST
PB502186
UL, CSA, ATEX, IECEx, GL,
LR, DNV, GOST
50NSYTRAAB3550NSYTRAAB3550NSYTRAAB3550NSYTRAAB35
10141824
25
Page 26
Linergy connection systems
Terminal blocks
Linergy TR
Screw terminal blocks
Screw terminal blocks - Double deck passthrough
PB502181
NSYTRV43NSYTRV44NSYTRV24DNSYTRV44DNSYTRV26T
Nominal c.s.a.4 mm²4 mm²2.5 mm²4 mm²2.5 mm²
Type of blockPassthrough - Multi-polePassthrough - Multi-polePassthrough - Double deckPassthrough - Double deckPassthrough - Triple deck
Type of connection1 pole - 1 x 21 pole - 2 x 22 pole - 1 x 12 pole - 1 x 13 pole - 1 x 1
ColourGreyGreyGreyGreyGrey
Max. electric values (Umax, Imax)500 V, 41 A500 V, 39 A500 V, 28 A800 V, 36 A500 V, 24 A
(1) If the fuse is faulty, the downstream circuit is not off load.
(2) The current is determined by the fuse used, the voltage by the light indicator. Observe max. power dissipation.
31
Page 32
Linergy connection systems
Terminal blocks
Screw terminal blocks - Measuring terminals
Linergy TR
Screw terminal blocks
PB502208
NSYTRV62TTDNSYTRV62TTNSYTRV62TTPE
Nominal c.s.a.6 mm²6 mm²6 mm²
Max. electric values ( Umax, Imax )500 V, 30 A500 V, 30 A -
Switching lockPluggable10NSYTRASJ610NSYTRASJ6 - -
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test plug adaptor
For plug-in bridge shaft
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockKnife disconnectPassthroughProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 11 pole - 1 x 1
ColourGreyGreyGreen/Yellow
Sold in lots of Unit referenceSold in lots of Unit reference
PB502211
32
Page 33
Linergy connection systems
Terminal blocks
PB502212
Linergy TR
Screw terminal blocks
Only two NSYTRV62TTD measuring transducer disconnect
PB502355PB502359
terminal blocks are required for a current transformer
measuring circuit. This means that less space is required
compared to a circuit design using slide-type terminal blocks.
100.8
-
Sold in lots ofUnit reference
50NSYTRAAB35
PB502358
The new NSYTRV62TT measuring transducer disconnect
terminal blocks with screw connection technology are
characterised by easy operation and clarity. All switching
statuses are instantly clearly visible. Due to the extensive
range of exible accessories, costs and time are saved when
executing all transducer test circuit tasks.
The longitudinal isolating switch contacts snap safely into their
respective switching state. Imprinted switching symbols ensure
clarity. The optional switching lock snaps in and effectively
prevents accidental switching. For simultaneous actuation, two
switches can be connected to each other using a connection
bridge.
The NSYTRASJ switch jumpers can be placed on both sides
PB502356
10
of the disconnect point in the bridge shaft and can be securely
snapped in irrespective of the terminal strip conguration.
The bridge for the transformer short-circuit can be securely
engaged in the end positions and screw terminal points are
used to make contact.
33
Page 34
Linergy connection systems
Terminal blocks
Screw terminal blocks - Neutral disconnect
Linergy TR
Screw terminal blocks
PB502221
NSYTRV42NENSYTRV62NE
Nominal c.s.a.4 (6) mm²6 (10) mm²
Max. electric values (Umax , Imax)250 V, 32 A400 V, 41 A
Dimensions (mm)
Cabling c.s.a. (mm²)46
Nominal electric values
CerticationsGOSTGOST
Terminal blocks
Type of blockNeutral disconnectNeutral disconnect
Type of connection1 pole - 1 x 11 pole - 1 x 1
ColourBlueBlue
IEC/EN 60947-7-1250 V, 32 A400 V, 41 A
UL - CSA - ATEX
Blue50NSYTRV42NE50NSYTRV62NE
- -
Sold in lots of Unit referenceSold in lots of Unit reference
PB502222
Accessories
End stop
for 35 mm DIN rail
End plate,
width 2.2 mm
Partition plate,
width 2 mm
Plug-in bridge
Red
Copper neutral bar1m long, 10 x 3 mm10NSYTRACB10310NSYTRACB103
Terminal clamp for neutral bar25NSYBPCH51625NSYBPCH516
Test plugMetalic part, Ø 2.3 mm 10NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft 10NSYTRAFT10NSYTRAFT
Marker tag holderFor
DIN rail 35 x 7.2 mmPerforated. 2 m long20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
All NSYTRV
screwless disconnect slide. When this is levered over with a
standard screwdriver, the contact fork slides onto the busbar.
The slide engages in the end positions to provide additional
protection against accidental actuation.
The shape of the NSYTRV
the same as for the screw terminal blocks NSYTRV.
End plateGrey50NSYTRACM2250NSYTRACM2250NSYTRACM2250NSYTRACM22
Partition plateGrey50NSYTRAPM2250NSYTRAPM2250NSYTRAPM2250NSYTRAPM22
Plug-in bridge
Red
Blue10-pole10NSYTRAL210BL10NSYTRAL410BL - - - -
Grey10-pole10NSYTRAL210GR10NSYTRAL410GR - - - -
Marker tag holderFor AB15 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 15 x 5mmPerforated, 2m long10NSYTRADR15510NSYTRADR15510NSYTRADR15510NSYTRADR155
Marking accessoriesSee page 80
General data
Type of blockPassthroughPassthroughProtective earthProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 11 pole - 1 x 11 pole - 1 x 1
ColourGreyGreyGreen/YellowGreen/Yellow
CSA20 - 12 AWG, 600 V, 30 A
UTE, category Ca 750 V, c 750 V, 30 Aa 750 V, c 750 V, 47 Aa 750 V, c 750 V, 71 Aa 750 V, c 750 V, 125 A
VDE, group Ca 750 V, c 750 V, 30 Aa 750 V, c 750 V, 47 Aa 750 V, c 750 V, 65 Aa 750 V, c 750 V, 115 A
Terminal blocks
No.
points
Sold in
lots of
Unit
reference
Weight
g
1-poleGrey------
2-poleGrey-10DB6CD10226.0-
3-poleGrey-----
5-poleGrey-10DB6CD10560.0-
10-poleGrey-10DB6CD110114.0-
Accessories (dimensions in mm)
2 Socket for test
plug
Ø 2-10DB6CD028.0------------
Ø 2.3-50AB1A20.5Fitted as standard--------
Ø 4----
3 Test plug -50AB1AT1 (red)1.7
4 “Danger” live terminals cover----
5 Equipotential commoning link
1010DB6CD19200.0
with protective cover (1)
6 Marking accessories
(1) The commoning link connects the pins which screw into the sockets. It comprises: the link,
10 pins, 10 screws and a protective cover.
Single-pole splitter blocks, with Telequick
universal foot
DB300761
AK2 BA162U
Clip-on mounting on 35 mm 1 7 4 rails and Telequick mounting plate
a
H
b
Nominal c.s.a. in mm
Dimensions in mm
Cabling c.s.a. in mm
UpstreamFlexible cable
DownstreamFlexible cable
Nominal electrical values
CerticationsCSAUL, CSA
2
Upstream2.52.5
Downstream255 or 6 mm thick copper bar
Length (a)61
Width (b)37.537.5
Height (H)
with
2
without cable end
Flexible cable
with cable end
Solid cable6 x 0.5 to 66 x 0.5 to 6
without cable end
Flexible cable
with cable end
Solid cable6 to 35
NFC 20040Ui 750 V, In 25 A
CSA600 V; 1 x 145 A / 6 x 24 A600 V; 1 x 145 A/ 6 x 24 A
UL-600 V; 1 x 145 A/ 6 x 20 A
1 rail5858
7 rail48.548.5
4 rail53.553.5
rail41.541.5
AB3RV162U
6 x 0.5 to 46 x 0.5 to 4
6 x 0.5 to 2.56 x 0.5 to 2.5
4 to 25Clamping onto 5 or 6 mm thick copper bar; without drilling
4 to 25
40
Terminal blocks
No.
points
1 I, 6 O
Accessories (dimensions in mm)
Plastic end stop
with screw
Metal end stop
with screw
Clip-on plastic
end stop
Marking tag holder for clip-on plastic end
stop
Marking accessories AB1R**; AB1G**AB1R**; AB1G**
Grey1/610
Width 7,5 on 4-100AB1AB7P324.2
Width 8 on 1 or 7
Width 10 on 4
Width 8 on 1 or 7
Width 8 on 1 or 7
-100AB1AB8P355.9
-100AB1AB10M32 6.5
-100AB1AB8M35 14.8
-100AB1AB8R355.9
-100AB1AB8R355.9
Sold in
lots of
Unit
reference
AB3RV162U95
Weight
g
Page 41
PB501854
Linergy connection systems
Terminal blocks
AK2BA162U
61
Linergy TR
Screw terminal blocks
Single-pole splitter blocks, with Telequick
universal foot
Ui 750 V, In 25 A
No. pointsSold in
lots of
1/610AK2BA162U 95
----
----
----
----
----
----
Unit
reference
Weight
g
41
Page 42
42
Page 43
Linergy connection systems
Terminal blocks
Spring terminal blocks
Contents
Selection guide44
PB502080PB502139PB502164PB502159PB502218
Passthrough48
Protective earth52
Double deck56
Disconnect58
Miniature60
43
Page 44
Linergy connection systems
Terminal blocks
PassthroughProtective earth
Passthrough
Linergy TR
Selection guide: Spring terminal blocks
PB502080
Number of poles 1 - 1 x 1NSYTRR22NSYTRR42NSYTRR62NSYTRR102NSYTRR22PENSYTRR42PENSYTRR62PENSYTRR102PE
ColoursGrey----
Mounting on
See pages484948/495052535454
Nominal c.s.a (mm²)2.54610 & 162.54610 & 16
1 - 1 x 2NSYTRR23NSYTRR43NSYTRR63-NSYTRR23PENSYTRR43PE--
1 - 2 x 2NSYTRR24NSYTRR44--NSYTRR24PENSYTRR44PE--
1 - 2 x 4--------
1 - 3 x 3--------
2 - 1 x 1--------
2 - 1 x 2--------
3 - 1 x 1--------
Due to its space saving design, mini spring-cage terminal
blocks are ideal for wiring in extremely restricted spaces.
The generous connection space enables fast wiring of both
stranded and solid conductors.
They can be mounted on NS 15 DIN rail or directly mounted
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow10NSYTRACSR210NSYTRACSR210NSYTRACSR210NSYTRACSR410NSYTRACSR410NSYTRACSR4
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockProtective earthProtective earthProtective earthProtective earthProtective earthProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 21 pole - 2 x 21 pole - 1 x 11 pole - 1 x 21 pole - 2 x 2
ColourGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/Yellow
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow10NSYTRACSR610NSYTRACSR1010NSYTRACSR10
Marker tag holderFor
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockProtective earthProtective earthProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 11 pole - 1 x 1
ColourGreen/YellowGreen/YellowGreen/Yellow
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow10NSYTRACSR210NSYTRACSR410NSYTRACSR2
Marker tag holderFor
DIN rail 35x7.2mmPerforated, 2m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockPassthrough - Double deckPassthrough - Double deckPassthrough - 3 Levels
Type of connection2 pole - 1 x 12 pole - 1 x 13 pole - 1 x 1
ColourGreyGreyGrey
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT
Warning labelYellow10NSYTRACSR210NSYTRACSR4
Marker tag holderFor
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockProtective earth - Double deckDouble deck - Protective earth
Type of connection1 pole - 2 x 21 pole - 2 x 2
ColourGreen/YellowGreen/Yellow
Removable carrierFor fuse 5 x 20 mm----10NSYTRASF52010NSYTRASF520--
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow50NSYTRACSR250NSYTRACSR250NSYTRACSR250NSYTRACSR250NSYTRACSR2
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockDisconnect (blade)Disconnect (blade)Disconnect (for carrier)Disconnect (for carrier)Disconnect (blade)
Type of connection1 pole - 1 x 11 pole - 1 x 21 pole - 1 x 11 pole - 1 x 22 pole - 1 x 1
ColourGreyGreyGreyGreyGrey
For fuse 5 x 20 mm 110 - 250 V LED----10NSYTRASF520M10NSYTRASF520M--
For fuse 5 x 20 mm 12 - 30 V LED----10NSYTRASF520B10NSYTRASF520B--
For component----10NSYTRASV110NSYTRASV1--
With 1N4007 diode----10NSYTRASV210NSYTRASV2--
Marker tag holderFor AB15 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100-
DIN rail 15 x 7.2 mmPerforated, 2 m long10NSYTRADR15510NSYTRADR15510NSYTRADR155--------
Marking accessories (for all mini spring terminals)Only for NSYTRABF . See page 81
General data
Type of blockPassthroughPassthroughProtective earthPassthroughPassthroughPassthroughPassthrough
Type of connection1 pole - 1 x 11 pole - 2 x 21 pole - 1 x 11 pole - 1 x 11 pole - 2 x 21 pole - 1 x 11 pole - 2 x 2
ColourGreyGreyGreen/YellowGreyGreyGreyGrey
IEC/EN 60947-7-1800 V, 24 A800 V, 24 A UL600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG28 - 12 AWG600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG
CSA600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG28 - 12 AWG600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG600 V, 20 A, 28 - 12 AWG
ATEX
Grey50NSYTRR22M50NSYTRR24M50NSYTRR22MPE50NSYTRR22MF50NSYTRR24MF50NSYTRR22MP10NSYTRR24MP
Blue50NSYTRR22MBL50NSYTRR24MBL--50NSYTRR22MFBL50NSYTRR24MFBL50NSYTRR22MPBL10NSYTRR24MPBLGrey, with ange------50
End stopClip-on, 5.2 mm50NSYTRAAB3550NSYTRAAB35
for 35 mm DIN railWith screw, 9.5 mm50NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV35
End plateGrey50NSYTRACR2250NSYTRACR2350NSYTRACR2450NSYTRACR4250NSYTRACP4350NSYTRACP44
width 2.2 mmBlue50NSYTRACR22BL50NSYTRACR23BL50NSYTRACR24BL- - - -- -
Partition plateGrey50NSYTRAPR4250NSYTRAPR2350NSYTRAPR2450NSYTRAPR42- -- -
width 2 mmBlue- - - - - - - - - -- -
Plug-in bridge2-pole50NSYTRAL2250NSYTRAL2250NSYTRAL2250NSYTRAL4250NSYTRAL4250NSYTRAL42
Red3-pole50NSYTRAL2350NSYTRAL2350NSYTRAL2350NSYTRAL4350NSYTRAL4350NSYTRAL43
Blue10-pole10NSYTRAL210BL10NSYTRAL210BL10NSYTRAL210BL10NSYTRAL410BL10NSYTRAL410BL10NSYTRAL410BL
Grey10-pole10NSYTRAL210GR10NSYTRAL210GR10NSYTRAL210GR10NSYTRAL410GR10NSYTRAL410GR10NSYTRAL410BL
Step-down bridge,Screw to screw terminal- - - - - - - - - - - -
down to 2.5/4 mm²Spring to spring trerminal- - - - - - - - - - - -
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow- - - - - - - - - - - -
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockPassthroughPassthroughPassthroughPassthroughPassthroughPassthrough
Type of connection1 pole - 1 x 11 pole - 1 x 21 pole - 2 x 21 pole - 1 x 11 pole - 1 x 21 pole - 2 x 2
ColourGreyGreyGreyGreyGreyGrey
Sold in lots of Unit referenceSold in lots of Unit referenceSold in lots ofUnit referenceSold in lots ofUnit referenceSold in lots ofUnit referenceSold in lots ofUnit reference
End stopClip-on, 5.2 mm50NSYTRAAB3550NSYTRAAB3550NSYTRAAB35
for 35 mm DIN railWith screw, 9.5 mm50NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV3550NSYTRAABV35
End plate,Grey50NSYTRACR2250NSYTRACR2350NSYTRACR2450NSYTRACR4250NSYTRACP4350NSYTRACP44
width 2.2 mmBlue50NSYTRACR22BL50NSYTRACR23BL50NSYTRACR24BL- - - - - -
Partition plate,Grey50NSYTRAPR4250NSYTRAPR2350NSYTRAPR2450NSYTRAPR42- - - -
width 2 mmBlue- - - - - - - - - - - -
Plug-in bridge2-pole50NSYTRAL2250NSYTRAL2250NSYTRAL2250NSYTRAL4250NSYTRAL4250NSYTRAL42
Red3-pole50NSYTRAL2350NSYTRAL2350NSYTRAL2350NSYTRAL4350NSYTRAL4350NSYTRAL43
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Warning labelYellow- - - - - - - - - - - -
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockProtective earthProtective earthProtective earthProtective earthProtective earthProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 21 pole - 2 x 21 pole - 1 x 11 pole - 1 x 21 pole - 2 x 2
ColourGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/YellowGreen/Yellow
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT
Marker tag holderFor
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockPassthrough - Double deckProtective earth - Double deck
Type of connection2 pole - 1 x 11 pole - 2 x 2
ColourGreyGreen/Yellow
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Removable carrierfor fuse 5 x 20 mm - - -10NSYTRASF52010NSYTRASF520
Type of blockDisconnect (blade)Disconnect (blade)Disconnect (blade)Disconnect (for carrier)Disconnect (for carrier)
Type of connection1 pole - 1 x 11 pole - 1 x 21 pole - 2 x 21 pole - 1 x 11 pole - 1 x 1
ColourGreyGreyGreyGreyGrey
for fuse 5 x 20 mm 110 V - - -10NSYTRASF520M10NSYTRASF520M
for fuse 5 x 20 mm 12 V - - -10NSYTRASF520B10NSYTRASF520B
for component - - -10NSYTRASV110NSYTRASV1
with 1N4007 diode - - -10NSYTRASV210NSYTRASV2
- - - - -
Sold in
lots of
Unit referenceSold in
PB502259
lots of
PB502261
Unit referenceSold in
lots of
Unit reference
72
Page 73
Linergy connection systems
Terminal blocks
Linergy TR
Push-in terminal blocks
PB502258
6256
400 V, 20 A400 V, 20 A
Sold in lots of Unit referenceSold in lots of Unit reference
Test plugMetalic part, Ø 2.3 mm10NSYTRAATM110NSYTRAATM110NSYTRAATM110NSYTRAATM1
Test adaptorFor plug-in bridge shaft10NSYTRAFT10NSYTRAFT10NSYTRAFT10NSYTRAFT
Marker tag holderFor AB35 end stop100NSYTRASB4100NSYTRASB4100NSYTRASB4100NSYTRASB4
DIN rail 35 x 7.2 mmPerforated, 2 m long20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD20NSYSDR200BD
Marking accessoriesSee page 80
General data
Type of blockPassthroughPassthroughPassthroughProtective earth
Type of connection1 pole - 1 x 11 pole - 1 x 2 (1 screw x 2 IDC)1 pole - 1 x 11 pole - 1 x 1
ColourGreyGreyGreyGreen/Yellow
Plotter adapter for marking cards 1NSYTRABMP11NSYTRABMP11NSYTRABMP1
(1) For 16mm² terminal blocks or bigger, the strip must be broken and use the individual marking characters.
(2) Only for AB1 terminal blocks 4mm²; and for Multi9 Acti9 range.
PB502343
Unit referenceSold in
lots of
PB502344
Unit referenceSold in
lots of
80
PB502345
Unit referenceSold in lots ofUnit referenceSold in lots ofUnit referenceSold in lots ofUnit reference
lots of
Page 81
Linergy connection systems
Terminal blocks
Linergy TR
Marking accessories
PB502340
10 consecutive gures or numbers, printed
horizontally
Polyamide (PA 6.6, silicone and halogen
free)
Black markings on white backgroundBlack markings on white background Black markings on white background
For > = 10 mm² TBs: NSY TRV / TRR /
TRP / TRH
Lateral sides for NSYTRV terminal blocks
Central shaft for NSYTRR / NSYTRP /
NSYTRH terminal blocks
Sold in lots of Unit referenceSold in lots of Unit referenceSold in lots of Unit reference
PB502350
10 consecutive gures or numbers,
printed horizontally
Polyamide (PA 6.6, silicone and halogen
free)
For 2.5 mm² TBs: NSY TRV / TRR / TRP /
TRH
Central shaft for NSYTRR / NSYTRP /
NSYTRH terminal blocks
Lateral sides for NSYTRV terminal
blocks
10 consecutive gures or numbers,
printed horizontally
Polyamide (PA 6.6, silicone and halogen
free)
For 4 mm² TBs: NSY TRV / TRR / TRP /
TRH
Central shaft for NSYTRR / NSYTRP /
NSYTRH terminal blocks
Lateral sides for NSYTRV terminal blocks
PB502341
-- -- --
--1NSYTRABMP21NSYTRABMP2
PB502342
81
Page 82
Linergy connection systems
Terminal blocks
Linergy TR
Marking accessories
Marking accessories
PB502201
NSYTRABCVNSYTRABCNSYTRABCP5
Marking collars for cablesMarking inserts for collarsMarking card for collars
Description Open marker carrier, 15 mm wide, for clipping into wire360 inserts for marking collars, A4 format, perforated 15 x 4 mm insertsMarking card with 50 inserts for marking collars 15 x 4 mm inserts
CompatibilityFor conductor diameter 2 mm up to 8 mmFor all NSYTRABCVmarking collarsFor all NSYTRABCVmarking collars
Marking collars and inserts
Marking collars
for conductor diameter2 to 3.5 mm500NSYTRABCV23-- --
Marking inserts, A4 format, perforated
ColourWhite--
Marking card with 50 inserts
ColourWhite--
MaterialPVC (Siliconefree)Polyester (Silicone and halogen free)Polycarbonate
ColourWhite marker with transparent sleeveWhite, yellow, red or blueWhite
Inammability class according to UL 94V0V0V0
Temperature range [°C]-50 … +8040 … +100-40 … +120
Mounting positionClip-on to the cableSlides inside the collar sleeveSlides inside the collar sleeve
Marking elementsWith any of the NSYTRABCP marking elementsCan be printed with any ofce printer, plotter or penCan be printed with plotter or pen
Sold in lots of Unit reference
3 to 5 mm500NSYTRABCV35-- --
5 to 8 mm500NSYTRABCV58-- --
b A exible plotter that helps you label marking elements quickly and easily.b Rugged construction in stylish aluminiumb Easy to change xtures to suit a variety of marking elementsb Auto calibration no adjustment necessaryb Including NSYTRA BMP1 / BMP2 adaptor plates, 0.25 & 0.35 mm black pens,
Printing areaA4
Input voltage/ frequency100 - 240 V AC, 50/60 Hz
InterfaceUSB 2.0
Operating systemMS Windows XP/Vista/7
CompatibilityFor all NSYTR blank marking cards
Marking collars and inserts
Marking plotter
ColourGrey1NSYTRAPLOT
Accessories
Adaptor platesFor NSYTRABPV
Pen, disposable 0.25 mm line, black1NSYTRAPEN2
marking cards
For NSYTRAFBPV
For ZBY
0.35 mm line, black1NSYTRAPEN3
; NSYTRAXPV* and NSYTRABCP5
marking cards1NSYTRABMP2
marking elements
1
Spacial.print software, power supply, connecting cables, user manual
Sold in lots of Unit reference
Sold in lots of Unit reference
1NSYTRABMP1
1NSYTRABMP3
(1) Can print ZBY0102; ZBY0501 and ZBY0502 marking elements and all marking sheets: NSYTRABC
82
; ZBY4100;ZBY001; ZBY5100 and ZBY1101.
Page 83
Linergy connection systems
Available
June 2013
Terminal blocks
Linergy TR
Marking accessories
PB502352
Sold in lots of Unit referenceSold in lots of Unit reference
10NSYTRABCP1--
-- 10NSYTRABCP5
PB502201
83
Page 84
Linergy connection systems
Terminal blocks
Linergy TR
Mounting and cabling accessories
Presentation
The cable end consists of a tinned copper tube, at the end of which is a moulded,
insulating bezel.
The copper tube encases the strands of the exible conductor and makes it easier to
insert it into terminals.
The plastic bezel insulates the conductor from adjacent connections.
In addition, certain models allow marking of the conductors.
General characteristics
Copper tube tinned by electrolysis according to ISO 1337.
Halogen-free plastic insulating bezel.
Temperature withstand - 20 °C to 105 °C.
Conforming to standards NFC 63-023 or DIN 46228.
UL and cCSAus certications for certain products.
Presentation of the range
4 types
3 lengths
b Single conductor cable ends with
insulating bezel
b Twin conductor cable ends with
insulating bezel
b Single conductor cable ends with
“markable” insulating bezel
b Single conductor cable ends with
insulating bezel for tting clip-on marker
tags
b Short: 11 mm,
for printed circuit board type mini-connector
b Medium: 13 mm,
for industrial applications, connector or
screw clamp
b Long: 16.8 mm,
for plug-in and spring terminal block
applications
84
4 types of packaging
b Dispenser pack: c.s.a. ≥ 2.5 mmb String of 10 detachable bags: c.s.a. ≤ 4 mmb Individual bag: c.s.a. ≥ 6 mmb Bag containing 10 strips of 50 cable ends
2 standards
b Products conforming to standard NF C 63-023b Products conforming to standard DIN 46228 Part 4
2
2
2
Page 85
Linergy connection systems
Terminal blocks
A
B
Linergy TR
Mounting and cabling accessories
4 types of packaging
3 types of bulk pack
b Strings of 10 detachable bags c.s.a. 0.25 mm2 to 4 mm2 inclusive.
b Individual bags containing 20 or 100 products c.s.a. 6 mm2 to 50 mm2.
b Dispenser containing 200, 100 or 50 productsv c.s.a. 0.5 to 2.5 mm2 (single conductor cable ends),
v c.s.a. 2 x 0.7 to 2 x 2.5 mm
The dispensers are supplied in packs. Each pack contains 5 dispensers.
This type of packaging for cable ends improves working conditions through more
rational use:
v it facilitates storage by avoiding mixing up cable ends of different cross sectional
areas,
v it immediately identies the c.s.a. of the cable ends it contains because it is the
same colour as these cable ends,
v it is designed for controlled dispensing A and automatic storage C,v the cable ends can be easily picked up from the dish-shaped receptacle B.
By simply pressing the sides, the dispenser releases the required quantity of cable
ends into the receptacle, where they can be picked up, as required.
Releasing the pressure on the sides stops the ow of cable ends.
2
(twin conductors cable ends).
The colour of the dispenser pack corresponds to the colour coding of the
Schneider Electric cable ends.
The cable end c.s.a. can therefore be selected visually and instantly.
Strips of 50 cable ends, packed in bags of 10 strips
b C.s.a. from 0.5 to 2.5 mmb Allows automatic feeding and crimping of cable ends, using crimping tool
AT1TRIF01.
C
2
.
85
Page 86
Linergy connection systems
Terminal blocks
Linergy TR
Mounting and cabling accessories
Product typeInsulated cable endsMarking accessories for insulated
Type Single conductor cable endsTwin conductor cable endsSingle conductor markable cable endsSingle conductor cable ends with facility
Conforming to standardNF C 63-023DIN 46228NF C 63-023DIN 46228NF C 63-023DIN 46228NF C63-023DIN 46228-
Length of cable endShort-medium-longMediumMediumMedium-long-
Conductor c.s.a. (mm2)0.25 to 60.5 to 62 x 0.75 to 2 x 2.50.25 to 2.50.5 to 2.54 to 50-
PackagingIndividual bag (6 mm2)
Type of clip-on marker--Letter
Strip of tear-off bags
Dispenser pack (0.5 to 2.5 mm
2
)
Dispenser packStrip of tear-off bags
Tools available--Marker holder
ReferencesDZ5CE/AZ5CEAZ5DEDZ5CADZ5CAAR1SC0AR1MAT1PAT1/AT2
See page889088908991899191919192/93
Single conductor cable ends (Packed in individual bags or “strings” of bags)
Conductor
c.s.a.
2
mm
0.2526YellowShort2.21.2116.210 x 100DZ5CE002L6 0.055
0.3424GreenShort2.21.2116.210 x 100
0.522WhiteShort31.4116.210 x 100DZ5CE005L6 (1) 0.085
0.7520BlueShort3.11.6116.210 x 100DZ5CE007L6 (1)0.095
118RedShort3.41.811.56.210 x 100DZ5CE010L6 (1)0.095
1.516BlackShort42.111.56.210 x 100DZ5CE015L6 (1)0.110
214YellowMedium 4.22.3514.58.210 x 100DZ5CE0200.135
2.514GreyMedium 4.62.714.58.210 x 100DZ5CE025 (1)0.150
412OrangeMedium 5.53.317.39.810 x 100DZ5CE042 (1)0.300
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
Medium 2.21.2138.210 x 100DZ5CE0020.060
Medium 2.21.2138.210 x 100DZ5CE0030.060
Medium 31.4138.210 x 100DZ5CE005 (1) 0.090
Long31.416.81210 x 100DZ5CE005L120.095
Medium 3.11.6138.210 x 100DZ5CE007 (1)0.100
Medium 3.41.813.58.210 x 100DZ5CE010(1)0.100
Long3.41.816.81210 x 100DZ5CE010L120.150
Medium 42.113.58.210 x 100DZ5CE015 (1)0.120
Long42.122.817.710 x 100DZ5CE0153 (1)0.215
Long4.62.72417.710 x 100DZ5CE0253 (1)0.254
Long5.53.325.517.510 x 100DZ5CE043 (1)0.455
lots of
Unit
reference
DZ5CE003L6
Weight
per lot
0.055
532807
AZ5DE
610GreenMedium 73.952011.51 x 100DZ5CE0620.045
Single conductor cable ends (In dispenser pack)
0.522WhiteMedium 31.4138.25 x 200AZ5CE005 (1)0.140
0.7520BlueMedium 3.11.6138.25 x 200AZ5CE007 (1)0.150
118RedMedium 3.41.813.58.25 x 200AZ5CE010 (1)0.165
1.516BlackMedium 42.113.58.25 x 200AZ5CE015 (1)0.180
2.514GreyMedium 4.62.714.58.25 x 100AZ5CE025 (1)0.160
Single conductor cable ends (Strips of 50, packed in bag)
0.522WhiteMedium 3.11.314810 x 50DZ5CEB0050.380
0.7520BlueMedium 3.31.514810 x 50DZ5CEB0070.470
118RedMedium 3.51.714810 x 50DZ5CEB0100.500
1.516BlackMedium 4214810 x 50DZ5CEB0150.570
2.514GreyMedium 4.72.514810 x 50DZ5CEB0250.720
Long73.952617.51 x 100DZ5CE0630.065
Twin conductor cable ends (In dispenser pack)
Conductor
c.s.a.
2
mm
2 x 0.7520BlueMedium 2.8 x 521585 x 100AZ5DE007 (2)0.130
2 x 118RedMedium 3.4 x 5.4 2.251585 x 100AZ5DE010 (2)0.140
2 x 1.516BlackMedium 3.6 x 6.6 2.51585 x 100AZ5DE015 (2)0.155
2 x 2.514GreyMedium 4.2 x 7.8 3.218.5105 x 50AZ5DE025 (2)0.145
(1) UL certied products.
(2) cCSAus certied products.
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
lots of
Unit
reference
Weight
per lot
88
Page 89
c1
c
8
17
c
Linergy connection systems
Terminal blocks
Linergy TR
Mounting and cabling accessories
Conforming to standard NF C 63-023
532815532816532827
AZ5DE
DZ5CA0pp
Medium
type
Long
type
Twin conductor cable ends (Economy packaging, in 1 plastic bag)
Conductor
c.s.a.
2
mm
2 x 0.522WhiteMedium 2.5 x 4.7 1.718.581 x 1000AZ5DE005 (2)0.110
2 x 0.7520BlueMedium 2.8 x 51.81581 x 1000AZ5DE0071 (2) 0.120
2 x 118RedMedium 3.4 x 5.4 2.051581 x 1000AZ5DE0101 (2)0.130
2 x 1.516BlackMedium 3.6 x 6.6 2.31581 x 1000AZ5DE0151 (2)0.145
2 x 2.514GreyMedium 4.2 x 7.8 2.918.5101 x 500AZ5DE0255 (2)0.090
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
lots of
Unit
reference
Weight
per lot
Single conductor markable cable ends (Packed in “strings” of bags)
Conductor
c.s.a.
2
mm
0.2526YellowMedium 2.21.213–10 x 100DZ5CA002 0.140
0.3424GreenMedium 2.21.213–10 x 100DZ5CA0030.140
0.522WhiteMedium 31.413–10 x 100DZ5CA005 (1)0.160
0.7520BlueMedium 3.11.613–10 x 100DZ5CA007 (1)0.160
118RedMedium 3.41.813.5–10 x 100DZ5CA010 (1)0.160
1.516BlackMedium 42.113.5–10 x 100DZ5CA015 (1)0.180
2.514GreyMedium 4.62.714.5–10 x 100DZ5CA025 (1)0.250
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
lots of
Unit
reference
Weight
per lot
DZ5CAppp
532828
DZ5CAppp
Single conductor cable ends with facility for clip-in marker tag holder
Conductor
c.s.a.
2
mm
412OrangeMedium 5.53.319.511.510 x 100DZ5CA042 (1)0.300
610GreenMedium 73.952011.51 x 100DZ5CA0620.045
108BrownMedium 8.44.9521.5121 x 100DZ5CA1020.057
166WhiteMedium 8.86.3523.5121 x 100DZ5CA1620.078
254BlackMedium 128.153017.51 x 100DZ5CA2530.156
352RedMedium 13.5930161 x 20DZ5CA3520.054
500BlueMedium 15.71136201 x 20DZ5CA5020.060
(1) UL certied products.
(2) cCSAus certied products.
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
Long5.53.325.517.510 x 100DZ5CA043(1) 0.460
Long73.952617.51 x 100DZ5CA0630.065
Long8.44.952717.51 x 100DZ5CA1030.085
Long8.86.352917.51 x 100DZ5CA1630.100
Long13.5939251 x 20DZ5CA3530.060
Long15.71141251 x 20DZ5CA5030.074
lots of
Unit
reference
Weight
per lot
89
Page 90
c1
c
c1
c
c1
c
Linergy connection systems
Terminal blocks
Linergy TR
Mounting and cabling accessories
Conforming to standard NF C 63-023
532818
DZ5CE
532818
DZ5CE
Short
type
Medium
type
Single conductor cable ends (Packed in individual bags or “strings” of bags)
Conductor
c.s.a.
2
mm
0.522WhiteShort31.4116.210 x 100DZ5CE005L6D (1)0.085
0.7520GreyShort3.11.6116.210 x 100DZ5CE007L6D (1) 0.095
118RedShort3.41.811.56.210 x 100DZ5CE010L6D (1) 0.095
1.516BlackShort42.111.56.210 x 100DZ5CE015L6D (1) 0.110
2.514BlueMedium 4.62.714.58.210 x 100DZ5CE025D (1)0.150
412GreyMedium 5.53.317.39.810 x 100DZ5CE042D (1)0.300
610YellowMedium 73.952011.51 x 100DZ5CE062D0.045
Single conductor cable ends (In dispenser pack)
0.522WhiteMedium 31.4138.25 x 200AZ5CE005D (1)0.140
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
Medium 31.4138.210 x 100DZ5CE005D (1)0.090
Long31.416.81210 x 100DZ5CE005L12D0.095
Medium 3.11.6138.210 x 100DZ5CE007D (1)0.100
Medium 3.41.813.58.210 x 100DZ5CE010D (1)0.100
Long3.41.816.81210 x 100DZ5CE010L12D0.150
Medium 42.113.58.210 x 100DZ5CE015D (1)0.120
Long42.122.817.710 x 100DZ5CE0153D (1)0.215
Long4.62.72417.710 x 100DZ5CE0253D (1)0.254
Long5.53.325.517.510 x 100DZ5CE043D (1)0.455
Long73.952617.51 x 100DZ5CE063D0.065
lots of
Unit
reference
Weight
per lot
532818
AZ5CE
532819
AZ5DE
0.7520GreyMedium 3.11.6138.25 x 200AZ5CE007D (1)0.150
118RedMedium 3.41.813.58.25 x 200AZ5CE010D (1)0.165
1.516BlackMedium 42.113.58.25 x 200AZ5CE015D (1)0.180
2.514BlueMedium 4.62.714.58.25 x 100AZ5CE025D (1)0.160
Single conductor cable ends (Strips of 50, packed in bag)
0.522WhiteMedium 3.11.3148 10 x 50DZ5CEB005D0.380
0.7520GreyMedium 3.31.5148 10 x 50DZ5CEB007D0.470
118RedMedium 3.51.714810 x 50DZ5CEB010D0.500
1.516BlackMedium 42 14810 x 50DZ5CEB015D0.570
2.514BlueMedium 4.72.514 810 x 50DZ5CEB025D0.720
Twin conductor cable ends (In dispenser pack)
2 x 0.7520GreyMedium 2.8 x 521585 x 100AZ5DE007D (2)0.130
2 x 118RedMedium 3.4 x 5.4 2.251585 x 100AZ5DE010D (2)0.140
2 x 1.516BlackMedium 3.6 x 6.6 2.51585 x 100AZ5DE015D (2)0.155
2 x 2.514BlueMedium 4.2 x 7.8 3.218.5105 x 50AZ5DE025D (2)0.145
(1) UL certied products.
(2) cCSAus certied products.
90
Page 91
c
c1
2
4,5
c
c1
22
Linergy connection systems
Terminal blocks
Linergy TR
Mounting and cabling accessories
Conforming to standard NF C 63-023
532820
DZ5CA0pp
532821
DZ5CApppp
532822
DZ5CApppp
532823
DZ5CApppp
(with clip-in marker tag
holder)
Medium
type
Long
type
Single conductor markable cable ends (Packed in “strings” of bags)
Conductor
c.s.a.
2
mm
0.522WhiteMedium 31.413–10 x 100DZ5CA005D (1)0.160
0.7520GreyMedium 3.11.613–10 x 100DZ5CA007D (1)0.160
118RedMedium 3.41.813.5–10 x 100DZ5CA010D (1)0.160
1.516BlackMedium 42.113.5–10 x 100DZ5CA015D (1)0.180
2.514BlueMedium 4.62.714.5–10 x 100DZ5CA025D (1)0.250
AWGmmmmmmmmkg
ColourTypeDimensionsSold in
Ø bØ b1cc1
lots of
Unit
reference
Weight
per lot
Single conductor cable ends with facility for clip-in marker tag holder (DIN 46228)
412OrangeMedium 5.53.319.511.510 x 100DZ5CA042D (1)0.300
610GreenMedium 73.952011.51 x 100DZ5CA062D0.045
108RedMedium 8.44.9521.5121 x 100DZ5CA102D 0.060
Long8.44.952717.51 x 100DZ5CA103D0.090
166BlueMedium 9.86.3523.5121 x 100DZ5CA162D0.080
Long9.86.352917.51 x 100DZ5CA163D0.100
254YellowLong128.153017.51 x 100DZ5CA253D0.156
352RedMedium 13.5930161 x 20DZ5CA352D0.054
Long13.5939251 x 20DZ5CA353D0.060
500BlueMedium 15.71136201 x 20DZ5CA502D0.060
Long15.71141251 x 20DZ5CA503D0.072
532824
AR1SC02
532825
AR1SC03
532826
Marking accessories for insulated, markable cable ends
DescriptionSold in
Clip-on marker tag (2)
(for cables 1 to 1.5 mm
Clip-in marker tag holder (2)
(for single conductor cable ends DZ5CApppp)
Markers
conforming to NF C 93-011 colour coding
Wallets of 200 markers
for DZ5CA cable ends or clip-on marker tags (4)
2
)
Letters1 lotAR1MB01 (5)0.310
Numbers1 lotAR1MA01 (7)0.150
lots of
100AR1SC02 0.100
100AR1SC03 0.100
200AR1MC01p(3)0.010
1 cardAR1MB01p(6)0.010
1 cardAR1MA01p (8)0.010
Unit
reference
Weight
per lot
kg
Accessories for tting markers
DescriptionApplicationReferenceWeight
Marker holderComprises 10 empty compartments which can
Tool for quick positioning of
AR1 Mp01 markers
AR1Mp01. AR1MC01p
522822
AT1PA1AT1PS1
(1) UL certied products.
(2) For rapid clip-on mounting of up to 7 markers AR1Mppp.
(3) Complete the reference by adding the number indicating the colour required:
Number1234567890
Marker colourBrownRedOrangeYellowGreenBlueVioletGreyWhiteBlack
Number colourWhiteBlackBlackBlackBlackBlackBlackBlackBlackWhite
(4) Each lot also comprises 400 earth markers (200 green and 200 yellow), 200 + symbols, 200 – symbols and 1 marker
positioning tool.
(5) A to Z (200 of each).
(6) Complete the reference by replacing the dot with the required letter. Each lot includes a card of 200 yellow markers with black
letters.
(7) 0 to 9 (200 of each).
(8) Complete the reference by replacing the dot with the required number. Each lot includes a card of 200 yellow markers with
black numbers.
each hold 100 AR1 MA01 or AR1 MB01 markers
On cable end tagsAT1PA10.010
AT1PS1 0.300
kg
91
Page 92
Linergy connection systems
Terminal blocks
Linergy TR
Mounting and cabling accessories
Conforming to standard NF C 63-023
815865
AT1PA7
815864
AT2PE1
815863
AT1PA2
Cabling accessories
DescriptionApplicationReferencesWeight
Automatic wire
stripping tool
Automatic wire
cutting/stripping tool
Cable end
crimping tools
(1)
Strips cable
from 0.08 to 4 mm
and cuts conductors
from 0.08 to 6 mm
Adjustable stripping
and cutting length.
Cuts and strips in a single
operation;
automatically adapts to
conductors from 0.4 to 4
without any adjustment or
selection.
For cables from 0.5 to 16 mm
For cables from 10 to 35 mm
2
2
mm2 ,
AT1PA7 0.165
AT2PE1
2
AT1PA2
2
AT1PA40.210
kg
0.340
0.210
815866
AT2PA5
532832
AT2TRIF01
Ratchet type
crimping tools
for cable ends (1)
Cable cutting/stripping
and cable end
feeding/crimping tool (1)
(for use with cable ends
packed in strips of 50)
(1) Cable ends: see pages 88 to 91.
For cables from 0.25 to 6 mm
For cables from 10 to 35 mm
For cables from 0.5 to 2.5 mm
2
AT2PA5
2
AT2PA60.520
2
AT2TRIF01 0.164
0.520
92
Page 93
815868
Linergy connection systems
Terminal blocks
AT2PB1
Linergy TR
Mounting and cabling accessories
Conforming to standard NF C 63-023
Cabling accessories (continued)
DescriptionCutting diameter for
copper/aluminium wires
mmkg
Cutting pliers3.5
ReferenceWeight
AT2PB1
0.200
522821
AT1HB2
Accessory
DescriptionApplicationReferenceWeight
Storage case (1)Comprises :
- 13 compartments for
cable ends
- 1 compartment for
cutting/stripping tool AT1PA7
(1) Cable ends: see pages 88 to 91.
AT1HB2 0.480
kg
93
Page 94
Page 95
Linergy connection systems
Terminal blocks
Index of references
Contents
95
Page 96
Linergy connection systems
Terminal blocks
Linergy TR
Index of references
ReferencePage(s)
AB…
AB1A238
AB1AB7P3240
AB1AB8M3540
AB1AB8P3540
AB1AB8R3540
AB1AB10M3240
AB1AT138
AB1AT2 39
AB3RV162U40
AK…
AK2BA162U41
AR…
AR1M87
AR1MA0191
AR1MA01p91
AR1MB01 91
AR1MB01p91
AR1MC01p91
AR1SC087
AR1SC0291
AR1SC0391
AT…
AT1/AT287
AT1HB293
AT1P87
AT1PA191
AT1PA2 92
AT1PA492
AT1PA7 92
AT1PS1 91
AT2PA5 92
AT2PA692
AT2PB1 93
AT2PE1 92
AT2TRIF01 92
AZ…
AZ5CE86
AZ5CE00588
AZ5CE005D 90
AZ5CE00788
AZ5CE007D90
AZ5CE01088
AZ5CE010D90
AZ5CE01588
AZ5CE015D90
AZ5CE02588
AZ5CE025D90
AZ5DE86
AZ5DE00589
AZ5DE007 88
AZ5DE007D 90
AZ5DE01088
ReferencePage(s)
AZ5DE010D90
AZ5DE01588
AZ5DE015D90
AZ5DE02588
AZ5DE025D90
AZ5DE0071 89
AZ5DE010189
AZ5DE015189
AZ5DE0255 89
DB…
DB6CD0238
DB6CD1938
DB6CD10219, 38
DB6CD10519, 38
DB6CD11019, 39
DB6DD10219, 39
DB6DD10319, 39
DB6ED0119, 39
DB6ED0439
DB6ED0939
DB6FD0119, 39
DB6FD0939
DZ…
DZ5CA86
DZ5CA002 89
DZ5CA00389
DZ5CA00589
DZ5CA005D 91
DZ5CA00789
DZ5CA007D91
DZ5CA01089
DZ5CA010D91
DZ5CA01589
DZ5CA015D91
DZ5CA02589
DZ5CA025D91
DZ5CA042 89
DZ5CA042D 91
DZ5CA043 89
DZ5CA06289
DZ5CA062D91
DZ5CA06389
DZ5CA10289
DZ5CA102D 91
DZ5CA10389
DZ5CA103D91
DZ5CA16289
DZ5CA162D91
DZ5CA16389
DZ5CA163D91
DZ5CA25389
DZ5CA253D91
DZ5CA35289
ReferencePage(s)
DZ5CA352D91
DZ5CA35389
DZ5CA353D91
DZ5CA50289
DZ5CA502D91
DZ5CA50389
DZ5CA503D91
DZ5CE00288
DZ5CE002L6 88
DZ5CE00388
DZ5CE003L6 88
DZ5CE005 88
DZ5CE005D 90
DZ5CE005L688
DZ5CE005L6D 90
DZ5CE005L1288
DZ5CE005L12D90
DZ5CE00788
DZ5CE007D90
DZ5CE007L688
DZ5CE007L6D90
DZ5CE01088
DZ5CE010D90
DZ5CE010L688
DZ5CE010L6D90
DZ5CE010L1288
DZ5CE010L12D90
DZ5CE01588
DZ5CE015D90
DZ5CE015L688
DZ5CE015L6D90
DZ5CE02088
DZ5CE02588
DZ5CE025D90
DZ5CE04288
DZ5CE042D90
DZ5CE04388
DZ5CE043D90
DZ5CE06288
DZ5CE062D90
DZ5CE06388
DZ5CE063D90
DZ5CE015388
DZ5CE0153D90
DZ5CE025388
DZ5CE0253D90
DZ5CE86
DZ5CEB00588
DZ5CEB005D90
DZ5CEB00788
DZ5CEB007D90
DZ5CEB01088
DZ5CEB010D90
ReferencePage(s)
DZ5CEB01588
DZ5CEB015D90
DZ5CEB02588
DZ5CEB025D90
NSYB…
NSYBPCH51634
NSYD…
NSYSDR200BD20-34, 48-59,
66-77
NSYT…
NSYTRAAB1536, 37, 60
NSYTRAAB3520-34, 48-59,
66-77
NSYTRAABV3520-34, 48-59,
66-77
NSYTRAATM120-34, 48-59,
66-77
NSYTRAATP120-34, 48-59,
66-77
NSYTRAB580
NSYTRAB5L1N80
NSYTRAB680
NSYTRAB6L1N80
NSYTRAB880
NSYTRAB1081
NSYTRAB51080
NSYTRAB52080
NSYTRAB53080
NSYTRAB54080
NSYTRAB55080
NSYTRAB56080
NSYTRAB57080
NSYTRAB58080
NSYTRAB59080
NSYTRAB61080
NSYTRAB62080
NSYTRAB63080
NSYTRAB64080
NSYTRAB65080
NSYTRAB66080
NSYTRAB67080
NSYTRAB68080
NSYTRAB69080
NSYTRAB81080
NSYTRAB82080
NSYTRAB83080
NSYTRAB84080
NSYTRAB85080
NSYTRAB86080
NSYTRAB87080
NSYTRAB88080
NSYTRAB89080
NSYTRAB101081
NSYTRAB102081
96
Page 97
Linergy connection systems
Terminal blocks
Linergy TR
Index of references
ReferencePage(s)
NSYTRAB103081
NSYTRAB104081
NSYTRAB105081
NSYTRAB106081
NSYTRAB107081
NSYTRAB108081
NSYTRAB109081
NSYTRAB510080
NSYTRAB610080
NSYTRAB810080
NSYTRAB1010081
NSYTRAB5110080
NSYTRAB6110080
NSYTRABC82, 83
NSYTRABCP182, 83
NSYTRABCP282, 83
NSYTRABCP382, 83
NSYTRABCP482, 83
NSYTRABCP582, 83
NSYTRABCV82, 83
NSYTRABCV2382, 83
NSYTRABCV3582, 83
NSYTRABCV5882, 83
NSYTRABF581
NSYTRABF681
NSYTRABF51081
NSYTRABF52081
NSYTRABF53081
NSYTRABF54081
NSYTRABF55081
NSYTRABF61081
NSYTRABF62081
NSYTRABF63081
NSYTRABF64081
NSYTRABF65081
NSYTRABFPV581
NSYTRABFPV681
NSYTRABMP180, 82
NSYTRABMP281, 82
NSYTRABMP382
NSYTRABPV580
NSYTRABPV680
NSYTRABPV880
NSYTRAC2220, 21, 24, 25, 34
NSYTRAC22BL20, 21, 24, 25, 34
NSYTRAC2326, 28
NSYTRAC2426, 28
NSYTRAC16220, 21, 25
NSYTRAC95222, 23
NSYTRACB10334
NSYTRACE2427, 29, 30
NSYTRACE2627
ReferencePage(s)
NSYTRACEP2427, 29, 30
NSYTRACH1276
NSYTRACH1376
NSYTRACH2277
NSYTRACM2236, 37
NSYTRACP122, 23
NSYTRACP223
NSYTRACP4367, 69
NSYTRACP4467, 69
NSYTRACPK2272, 73
NSYTRACPK2372
NSYTRACPK2472
NSYTRACR2248, 52, 66, 68
NSYTRACR22BL48, 52, 66, 68
NSYTRACR2348, 52, 58, 59,
66, 68
NSYTRACR23BL48, 52, 66, 68
NSYTRACR2448, 52, 58, 59,
67, 68
NSYTRACR24BL48, 52, 67, 68
NSYTRACR4249, 53, 67, 69, 73
NSYTRACR4349, 53
NSYTRACR4449, 53
NSYTRACR6249, 54
NSYTRACR6350
NSYTRACR10250, 54
NSYTRACR16250, 54
NSYTRACRE2456, 57, 70
NSYTRACRE2656
NSYTRACRE4456, 57
NSYTRACRM2260, 61
NSYTRACRMF2260, 61
NSYTRACS220, 24, 27, 29
NSYTRACS420, 24, 26, 27, 28,
29, 30
NSYTRACS620, 25
NSYTRACS1021, 25
NSYTRACSR248, 52, 56, 57,
58, 59
NSYTRACSR449, 53, 56, 57
NSYTRACSR649, 50, 54
NSYTRACSR1050, 54
NSYTRACT2232, 33
NSYTRADR15536, 37, 60
NSYTRAFT20, 21, 24-30,
32-34, 48-59,
66-73, 76, 77
NSYTRAFTAR32, 33
NSYTRAFTGN32, 33
NSYTRAFTYE32, 33
NSYTRAL2211, 12, 20, 24, 27,
29, 36, 48, 56, 57,
58, 59, 66, 67, 68,
70, 72, 73, 76, 77
ReferencePage(s)
NSYTRAL2320, 24, 27, 29, 36,
48, 56, 57, 58, 59,
66, 67, 68, 70, 72,
73, 76, 77
NSYTRAL2420, 24, 27, 29, 36,
48, 56, 57, 58, 59,
66, 67, 68, 70, 72,
73, 76, 77
NSYTRAL2520, 24, 27, 29, 36,
48, 56, 57, 58, 59,
66, 67, 68, 70, 72,
73, 76, 77
NSYTRAL4212, 20, 24, 26, 27,
28, 29, 30, 34, 36,
49, 56, 57, 67, 69,
73, 77
NSYTRAL4320, 24, 26, 27, 28,
29, 30, 34, 36, 49,
56, 57, 67, 69,
73, 77
NSYTRAL4420, 24, 26, 27, 28,
29, 30, 34, 36, 49,
56, 57, 67, 69,
73, 77
NSYTRAL4520, 24, 26, 27, 28,
29, 30, 34, 36, 49,
56, 57, 67, 69,
73, 77
NSYTRAL6220, 24, 32, 33, 34,
49, 50, 54
NSYTRAL6320, 24, 32, 33, 34,
49, 50, 54
NSYTRAL10221, 25, 50, 54
NSYTRAL16221, 25, 50, 54
NSYTRAL21020, 24, 27, 29, 36,
48, 56, 57, 58, 59,
66, 67, 68, 70, 72,
73, 76, 77
NSYTRAL210BL20, 36, 48, 66, 67
NSYTRAL210GR 20, 36, 48, 66, 67
NSYTRAL22020, 24, 27, 29, 36,
48, 56, 57, 58, 59,
66, 67, 68, 70, 72,
73, 76, 77
NSYTRAL35221, 25
NSYTRAL41020, 24, 26, 27, 28,
29, 30, 34, 36, 49,
56, 57, 67, 69,
73, 77
NSYTRAL410BL20, 36, 49, 67
NSYTRAL410GR20, 36, 49, 67
NSYTRAL42020, 24, 26, 27, 28,
29, 30, 34, 36, 49,
56, 57, 67, 69,
73, 77
NSYTRAL50221
NSYTRAL50321
NSYTRAL61020, 24, 32, 33, 34,
48, 50, 54
NSYTRAL610BL20, 49, 50
NSYTRAL610GR20, 49, 50
NSYTRAL70222
NSYTRAL95222, 23
NSYTRAL150223
ReferencePage(s)
NSYTRALF161031
NSYTRALM2260, 61
NSYTRALR6212, 49, 50
NSYTRALR10212, 50
NSYTRALR16212, 50
NSYTRALV2427
NSYTRALV24R56, 70
NSYTRALV6211, 20
NSYTRALV10211, 21
NSYTRALV16211, 21
NSYTRALV35211, 21
NSYTRALVR6211, 20
NSYTRALVR10211, 21
NSYTRALVR16211, 21
NSYTRALVR35211, 21
NSYTRAP2220, 21, 24, 25, 34
NSYTRAP22BL20, 21, 24, 25, 34
NSYTRAP2326, 28, 30
NSYTRAP2426, 28
NSYTRAPD1276, 77
NSYTRAPD1376
NSYTRAPE2427, 29, 30
NSYTRAPEN282
NSYTRAPEN382
NSYTRAPLOT82
NSYTRAPM2236, 37
NSYTRAPR2348, 52, 58, 59, 66,
68, 72
NSYTRAPR2448, 52, 58, 59, 67,
68, 72, 73
NSYTRAPR4248, 52, 53, 66,
67, 68
NSYTRAPT1621
NSYTRAPT3521
NSYTRASB420-37, 48-61,
66-73, 76, 77
NSYTRASF52030, 59, 73
NSYTRASF520B30, 59, 73
NSYTRASF520M30, 59, 73
NSYTRASJ232
NSYTRASJ332
NSYTRASJ432
NSYTRASJ632
NSYTRASV130, 59, 73
NSYTRASV230, 59, 73
NSYTRAX6L1L380
NSYTRAXP61080
NSYTRAXP62080
NSYTRAXP63080
NSYTRAXP64080
NSYTRAXP65080
NSYTRAXPV680
NSYTRH1211, 12, 65, 76
97
Page 98
Linergy connection systems
Terminal blocks
Linergy TR
Index of references
ReferencePage(s)
NSYTRH12PE65, 77
NSYTRH1365, 76
NSYTRH2211, 12, 65, 77
NSYTRP2211, 12, 64, 66
NSYTRP22AR64, 66
NSYTRP22BL64, 66
NSYTRP22PE64, 68
NSYTRP22SC65, 72
NSYTRP22TB65, 73
NSYTRP2364, 66
NSYTRP23AR64, 66
NSYTRP23BL64, 66
NSYTRP23PE64, 68
NSYTRP23SC65, 72
NSYTRP2464, 67
NSYTRP24BL64, 67
NSYTRP24D65, 70
NSYTRP24DBL65, 70
NSYTRP24DPE65, 70
NSYTRP24PE64, 68
NSYTRP24SC65, 72
NSYTRP4212, 64, 67
NSYTRP42BL64, 67
NSYTRP42PE64, 69
NSYTRP42TB65, 73
NSYTRP4364, 67
NSYTRP43BL64, 67
NSYTRP43PE64, 69
NSYTRP4464, 67
NSYTRP44BL64, 67
NSYTRP44PE64, 69
NSYTRR2211, 12, 44, 48
NSYTRR22AR44, 48
NSYTRR22BL44, 48
NSYTRR22M47, 60
NSYTRR22MBL47, 60
NSYTRR22MF47, 61
NSYTRR22MFBL47, 61
NSYTRR22MFF47, 61
NSYTRR22MP47, 61
NSYTRR22MPBL47, 61
NSYTRR22MPE47, 60
NSYTRR22PE45, 52
NSYTRR22SC46, 58
NSYTRR22SCAR46, 58
NSYTRR22TB46, 59
NSYTRR2344, 48
NSYTRR23AR44, 48
NSYTRR23BL44, 48
NSYTRR23PE44, 52
NSYTRR23SC46, 58
NSYTRR23SCAR46, 58
NSYTRR23TB46, 59
ReferencePage(s)
NSYTRR2444, 48
NSYTRR24AR44, 48
NSYTRR24BL44, 48
NSYTRR24D46, 56
NSYTRR24DBL46, 56
NSYTRR24DPE46, 57
NSYTRR24M47, 60
NSYTRR24MBL47, 60
NSYTRR24MF47, 61
NSYTRR24MFBL47, 61
NSYTRR24MFF47, 61
NSYTRR24MP61
NSYTRR24MPBL61
NSYTRR24PE45, 52
NSYTRR24SCD46, 59
NSYTRR26T46, 56
NSYTRR26TBL46, 56
NSYTRR4211, 12, 44, 49
NSYTRR42AR44, 49
NSYTRR42BL44, 49
NSYTRR42PE45, 53
NSYTRR4344, 49
NSYTRR43AR44, 49
NSYTRR43BL44, 49
NSYTRR43PE45, 53
NSYTRR4444, 49
NSYTRR44AR44, 49
NSYTRR44BL44, 49
NSYTRR44D46, 56
NSYTRR44DBL46, 56
NSYTRR44DPE46, 57
NSYTRR44PE45, 53
NSYTRR6212, 44, 49
NSYTRR62BL44, 49
NSYTRR62PE45, 54
NSYTRR6344, 50
NSYTRR10212, 44, 50
NSYTRR102BL44, 50
NSYTRR102PE45, 54
NSYTRR16212, 44, 50
NSYTRR162BL44, 50
NSYTRR162PE45, 54
NSYTRV2211, 16, 20
NSYTRV22AR16, 20
NSYTRV22BL16, 20
NSYTRV22M19, 36
NSYTRV22MBL19, 36
NSYTRV22MPE19, 37
NSYTRV22PE17, 24
NSYTRV22RD16, 20
NSYTRV22WH16, 20
NSYTRV24D18, 27
NSYTRV24DBL27
ReferencePage(s)
NSYTRV24DPE18, 29
NSYTRV26T18, 27
NSYTRV4211, 16, 20
NSYTRV42AR16, 20
NSYTRV42BK16, 20
NSYTRV42BL16, 20
NSYTRV42GN16, 20
NSYTRV42M19, 36
NSYTRV42MBL19, 36
NSYTRV42MPE19, 37
NSYTRV42NE19, 34
NSYTRV42PE17, 24
NSYTRV42RD16, 20
NSYTRV42SC18, 30
NSYTRV42SCD18, 30
NSYTRV42SF518, 31
NSYTRV42SF5LA31
NSYTRV42SF5LD18, 31
NSYTRV42SF618, 31
NSYTRV42SF6LA31
NSYTRV42SF6LD18, 31
NSYTRV42ST18, 30
NSYTRV42STAR18, 30
NSYTRV42TB18, 30
NSYTRV42WH16, 20
NSYTRV4318, 26
NSYTRV43BL26
NSYTRV43PE17, 18, 28
NSYTRV4418, 26
NSYTRV44BL26
NSYTRV44D18, 27
NSYTRV44DBL27
NSYTRV44DPE18, 29
NSYTRV44PE17, 18, 28
NSYTRV6211, 16, 20
NSYTRV62BL16, 20
NSYTRV62NE19, 34
NSYTRV62PE17, 24, 54
NSYTRV62TT32
NSYTRV62TTD19, 32
NSYTRV62TTPE19, 33
NSYTRV10211, 16, 21
NSYTRV102BL16, 21
NSYTRV102PE17, 25
NSYTRV16211, 16, 21
NSYTRV162BL16, 21
NSYTRV162PE17, 25
NSYTRV162SF18, 31
NSYTRV35211, 16, 21
NSYTRV352BL16, 21
NSYTRV352PE17, 25
NSYTRV50216, 21
NSYTRV502BL16, 21
ReferencePage(s)
NSYTRV502PE17, 25
NSYTRV70216, 22
NSYTRV952BB17, 22
NSYTRV952BC17, 23
NSYTRV1502BB17, 23
98
Page 99
Page 100
Make the most of your energy
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
92506 Rueil Malmaison Cedex
France
RCS Nanterre 954 503 439
Capital social 896 313 776 €
As standards, specications and designs change from
time to time, please ask for conrmation of the
information given in this publication.
Publication: Schneider Electric Industries SAS
Photos: Schneider Electric
Printed: