The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Product data sheet
Characteristics
LC2K0901M7
TeSys K reversing contactor - 3P(3 NO) -AC-3<= 440 V 9 A - 220...230 VAC coil
Oct 19, 2016
1
Main
Range TeSys
Product name TeSys K
Product or component
type
Device short name LC2K
Contactor application Motor control
Utilisation category AC-1
Device presentation Preassembled with reversing power busbar
Poles description 3P
Power pole contact
composition
[Ue] rated operational
voltage
[Ie] rated operational
current
Motor power kW 4 kW at 660...690 V AC 50/60 Hz
Control circuit type AC 50/60 Hz
Control circuit voltage 220...230 V AC 50/60 Hz
Auxiliary contact composition
[Uimp] rated impulse
withstand voltage
Overvoltage category III
[Ith] conventional free
air thermal current
Irms rated making capacity
Rated breaking capacity
[Icw] rated short-time
withstand current
Associated fuse rating 10 A gG for signalling circuit conforming to VDE
Average impedance 3 mOhm at 50 Hz - Ith 20 A for power circuit
Reversing contactor
Resistive load
AC-3
AC-4
3 NO
<= 690 V AC 50/60 Hz for signalling circuit
690 V AC 50/60 Hz for power circuit
16 A (<= 70 °C) at 690 V AC AC-1 for power circuit
20 A (<= 50 °C) at <= 440 V AC AC-1 for power circuit
9 A at <= 440 V AC AC-3 for power circuit
4 kW at 500...600 V AC 50/60 Hz
4 kW at 480 V AC 50/60 Hz
4 kW at 440 V AC 50/60 Hz
4 kW at 380...415 V AC 50/60 Hz
2.2 kW at 220...230 V AC 50/60 Hz
1 NC
8 kV
10 A at <= 50 °C for signalling circuit
20 A at <= 50 °C for power circuit
110 A AC for signalling circuit conforming to IEC
60947
110 A AC for power circuit conforming to IEC 60947
110 A AC for power circuit conforming to NF C
63-110
70 A at 660...690 V conforming to IEC 60947
110 A at 380...400 V conforming to IEC 60947
110 A at 220...230 V conforming to IEC 60947
80 A at 500 V conforming to IEC 60947
110 A at 440 V conforming to IEC 60947
110 A at 415 V conforming to IEC 60947
20 A <= 50 °C >= 15 s power circuit
110 A 100 ms signalling circuit
90 A 500 ms signalling circuit
80 A 1 s signalling circuit
40 A <= 50 °C 3 min power circuit
45 A <= 50 °C 1 min power circuit
60 A <= 50 °C 30 s power circuit
80 A <= 50 °C 10 s power circuit
85 A <= 50 °C 5 s power circuit
90 A <= 50 °C 1 s power circuit
0660
10 A gG for signalling circuit conforming to IEC
60947
25 A aM for power circuit
25 A gG at <= 440 V for power circuit
2
[Ui] rated insulation
voltage
Electrical durability 1.3 Mcycles 9 A AC-3 at Ue <= 440 V
Interlocking type Mechanical
Mounting support Plate
Standards BS 5424
Product certifications CSA
Connections - terminals Screw clamp terminals 2 cable(s) 0.34...1.5 mm² -
Tightening torque 1.3 N.m - on screw clamp terminals - with screwdriv-
Operating time 10...20 ms coil de-energisation and NO opening
Safety reliability level B10d = 20000000 cycles contactor with mechanical
Mechanical durability 5 Mcycles
Operating rate 3600 cyc/h
600 V for signalling circuit conforming to CSA C22.2
No 14
600 V for power circuit conforming to CSA C22.2 No
14
600 V for signalling circuit conforming to UL 508
690 V for signalling circuit conforming to IEC
60947-5-1
690 V for signalling circuit conforming to IEC
60947-4-1
690 V for power circuit conforming to IEC 60947-4-1
600 V for power circuit conforming to UL 508
0.18 Mcycles 20 A AC-1 at Ue <= 440 V
Rail
IEC 60947
NF C 63-110
VDE 0660
UL
cable stiffness: flexible - with cable end
Screw clamp terminals 2 cable(s) 0.75...4 mm² - cable stiffness: flexible - without cable end
Screw clamp terminals 2 cable(s) 1.5...4 mm² - cable stiffness: solid
Screw clamp terminals 1 cable(s) 0.34...2.5 mm² cable stiffness: flexible - with cable end
Screw clamp terminals 1 cable(s) 0.75...4 mm² - cable stiffness: flexible - without cable end
Screw clamp terminals 1 cable(s) 1.5...4 mm² - cable stiffness: solid
er flat Ø 6 mm
1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2
10...20 ms coil energisation and NO closing
load conforming to EN/ISO 13849-1
B10d = 1369863 cycles contactor with nominal load
conforming to EN/ISO 13849-1
Complementary
Control circuit voltage limits 0.2...0.75 Uc at <= 50 °C drop-out
0.8...1.15 Uc at <= 50 °C operational
Inrush power in VA 30 VA at 20 °C
Hold-in power consumption in VA 4.5 VA at 20 °C
Heat dissipation 1.3 W
Auxiliary contacts type Type instantaneous 1 NC
Signalling circuit frequency <= 400 Hz
Minimum switching current 5 mA for signalling circuit
Minimum switching voltage 17 V for signalling circuit
Non overlap distance 0.5 mm
Insulation resistance > 10 MOhm for signalling circuit
3
Environment
IP degree of protection IP2x conforming to VDE 0106
Protective treatment TC conforming to DIN 50016
Ambient air temperature for operation -25...50 °C
Ambient air temperature for storage -50...80 °C
Operating altitude 2000 m without derating derating in temperature
Flame retardance Requirement 2 conforming to NF F 16-102
Mechanical robustness Vibrations contactor opened 2 Gn, 5...300 Hz IEC 60068-2-6
Height 58 mm
Width 90 mm
Depth 57 mm
Product weight 0.39 kg
TC conforming to IEC 60068
Requirement 2 conforming to NF F 16-101
V1 conforming to UL 94
Vibrations contactor closed 4 Gn, 5...300 Hz IEC 60068-2-6
Shocks contactor opened, on Z axis 10 Gn for 11 ms IEC 60068-2-27
Shocks contactor opened, on Y axis 10 Gn for 11 ms IEC 60068-2-27
Shocks contactor opened, on X axis 6 Gn for 11 ms IEC 60068-2-27
Shocks contactor closed, on Z axis 15 Gn for 11 ms IEC 60068-2-27
Shocks contactor closed, on Y axis 15 Gn for 11 ms IEC 60068-2-27
Shocks contactor closed, on X axis 10 Gn for 11 ms IEC 60068-2-27
Offer Sustainability
Sustainable offer status Green Premium product
RoHS
Product environmental profile
Product end of life instructions Need no specific recycling operations
Compliant - since 0706 - Schneider Electric declaration of conformity
Available Download Product Environmental
4
Loading...