Page 1
Product data sheet
Characteristics
LC2D18F7
REVERSING CONTACTOR 575VAC 18A IEC
Product availability : Stock - Normally stocked in distribution facility
Main
Range TeSys
Product name TeSys D
Product or component type Reversing contactor
Device short name LC2D
Contactor application Motor control
Resistive load
Utilisation category AC-1
AC-3
Device presentation Preassembled with reversing power busbar
Poles description 3P
Power pole contact composition 3 NO
System Voltage <= 300 V DC power circuit
<= 690 V AC 25...400 Hz power circuit
[Ie] rated operational current 18 A (<= 140 °F (60 °C)) at <= 440 V AC AC-3 power circuit
32 A (<= 140 °F (60 °C)) at <= 440 V AC AC-1 power circuit
Motor power kW 10 kW at 500 V AC 50/60 Hz
10 kW at 660...690 V AC 50/60 Hz
4 kW at 220...230 V AC 50/60 Hz
7.5 kW at 380...400 V AC 50/60 Hz
9 kW at 415...440 V AC 50/60 Hz
Motor power HP (UL / CSA) 1 hp at 115 V AC 50/60 Hz 1 phase motors
3 hp at 230/240 V AC 50/60 Hz 1 phase motors
5 hp at 200/208 V AC 50/60 Hz 3 phases motors
5 hp at 230/240 V AC 50/60 Hz 3 phases motors
10 hp at 460/480 V AC 50/60 Hz 3 phases motors
15 hp at 575/600 V AC 50/60 Hz 3 phases motors
Control circuit type AC 50/60 Hz
[Uc] control circuit voltage 110 V AC 50/60 Hz
Auxiliary contact composition 1 NO + 1 NC
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947
Overvoltage category III
Feb 7, 2019
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
1
Page 2
[Ith] conventional free air thermal
current
Irms rated making capacity 300 A at 440 V power circuit conforming to IEC 60947
Rated breaking capacity 300 A at 440 V power circuit conforming to IEC 60947
[Icw] rated short-time withstand current 145 A <= 104 °F (40 °C) 10 s power circuit
Associated fuse rating 35 A gG at <= 690 V coordination type 2 power circuit
Average impedance 2.5 mOhm at 50 Hz - Ith 32 A power circuit
[Ui] rated insulation voltage 600 V power circuit certifications CSA
Electrical durability 1.65 Mcycles 18 A AC-3 at Ue <= 440 V
Power dissipation per pole 0.8 W AC-3
Safety cover With
Interlocking type Mechanical
Mounting support Plate
Standards CSA C22.2 No 14
Product certifications BV
Connections - terminals Control circuit: screw clamp terminals 2 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: flexible - with
32 A at <= 140 °F (60 °C) power circuit
10 A at <= 140 °F (60 °C) signalling circuit
140 A AC signalling circuit conforming to IEC 60947-5-1
250 A DC signalling circuit conforming to IEC 60947-5-1
240 A <= 104 °F (40 °C) 1 s power circuit
40 A <= 104 °F (40 °C) 10 min power circuit
84 A <= 104 °F (40 °C) 1 min power circuit
100 A 1 s signalling circuit
120 A 500 ms signalling circuit
140 A 100 ms signalling circuit
50 A gG at <= 690 V coordination type 1 power circuit
10 A gG signalling circuit conforming to IEC 60947-5-1
600 V power circuit certifications UL
690 V power circuit conforming to IEC 60947-4-1
690 V signalling circuit conforming to IEC 60947-1
600 V signalling circuit certifications CSA
600 V signalling circuit certifications UL
1 Mcycles 32 A AC-1 at Ue <= 440 V
2.5 W AC-1
Rail
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
CCC
CSA
DNV
GL
GOST
LROS (Lloyds register of shipping)
RINA
UL
cable end
Power circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...6 mm²) - cable stiffness: flexible - with
cable end
Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1.5...6 mm²) - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1.5...6 mm²) - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible - with
cable end
Power circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1.5...6 mm²) - cable stiffness: solid without cable end
2
Page 3
Power circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1.5...6 mm²) - cable stiffness: solid without cable end
Tightening torque Power circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm
Operating time 4...19 ms opening
Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
Mechanical durability 15 Mcycles
Operating rate 3600 cyc/h at <= 140 °F (60 °C)
Power circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2
Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2
12...22 ms closing
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Complementary
Coil technology Without built-in suppressor module
Control circuit voltage limits 0.3...0.6 Uc drop-out at 140 °F (60 °C), AC 50/60 Hz
Inrush power in VA 70 VA at 68 °F (20 °C) (cos ϕ 0.75) 60 Hz
Hold-in power consumption in VA 7.5 VA at 68 °F (20 °C) (cos ϕ 0.3) 60 Hz
Heat dissipation 2...3 W at 50/60 Hz
Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1
Signalling circuit frequency 25...400 Hz
Minimum switching current 5 mA signalling circuit
Minimum switching voltage 17 V Signalling circuit
Non-overlap time 1.5 ms on de-energisation (between NC and NO contact)
Insulation resistance > 10 MOhm signalling circuit
0.8...1.1 Uc operational at 140 °F (60 °C), AC 50 Hz
0.85...1.1 Uc operational at 140 °F (60 °C), AC 60 Hz
70 VA at 68 °F (20 °C) (cos ϕ 0.75) 50 Hz
7 VA at 68 °F (20 °C) (cos ϕ 0.3) 50 Hz
Type mirror contact (1 NC) conforming to IEC 60947-4-1
1.5 ms on energisation (between NC and NO contact)
Environment
IP degree of protection IP20 front face conforming to IEC 60529
Protective treatment TH conforming to IEC 60068-2-30
Pollution degree 3
Ambient air temperature for operation -4...140 °F (-20...60 °C)
Ambient air temperature for storage -76...176 °F (-60...80 °C)
Permissible ambient air temperature
around the device
Operating altitude 9842.52 ft (3000 m) without derating in temperature
Fire resistance 1562 °F (850 °C) conforming to IEC 60695-2-1
Flame retardance V1 conforming to UL 94
Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
Height 3.03 in (77 mm)
Width 3.54 in (90 mm)
Depth 3.39 in (86 mm)
Product weight 1.56 lb(US) (0.707 kg)
-40...158 °F (-40...70 °C) at Uc
Vibrations contactor closed 4 Gn, 5...300 Hz
Shocks contactor open 10 Gn for 11 ms
Shocks contactor closed 15 Gn for 11 ms
Ordering and shipping details
Category 22346 - CTR,D-LINE,OPEN,REVERSING-NEW
Discount Schedule I12
GTIN 00785901207450
Nbr. of units in pkg. 1
3
Page 4
Package weight(Lbs) 1.8
Returnability Y
Country of origin ID
Offer Sustainability
Sustainable offer status Green Premium product
RoHS (date code: YYWW) Compliant - since 0627 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Reference not containing SVHC above the threshold
Reference not containing SVHC above the threshold
Product environmental profile Available
Product end of life instructions Available
California proposition 65 WARNING: This product can expose you to chemicals including:
- - - - - - - Substance 1 Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer.
- - - - - - - More information For more information go to www.p65warnings.ca.gov
Contractual warranty
Warranty period 18 months
4
Page 5
Product data sheet
Dimensions Drawings
Dimensions
LC2D18F7
LC2 or 2 x LC1 a b
D09 to D18 (AC) 90 77 86 4 1.5 80
D093 to D123 (AC) 90 99 86 – – 80
D09 to D18 (DC) 90 77 95 4 1.5 80
D093 to D123 (DC) 90 99 95 – – 80
D25 to D38 (AC) 90 85 92 9 5 80
D183 to D383 (AC) 90 99 92 – – 80
D25 to D32 (DC) 90 85 101 9 5 80
D183 to D383 (DC) 90 99 101 – – 80
e1 and e2: including cabling.
(1) With safety cover, without add-on block.
(1)
c
e1 e2 G
5
Page 6
Product data sheet
Connections and Schema
Wiring
LC2D18F7
6
Loading...