Square D LC1D80BD Data Sheet

Product data sheet

Characteristics

LC1D80BD

TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V
80 A - 24 V DC standard coil

Main

Range of product TeSys D

Range TeSys

Product name TeSys D

Product or component type Contactor

Device short name LC1D

Contactor application Resistive load

Utilisation category AC-4

Poles description 3P

Pole contact composition 3 NO

[Ue] rated operational voltage <= 690 V AC for power circuit

[Ie] rated operational current 125 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit

Motor power kW 22 kW at 220...230 V AC 50/60 Hz AC-3

Motor power hp 20 hp at 200/208 V AC 50/60 Hz for 3 phases motors

Control circuit type DC standard

[Uc] control circuit voltage 24 V DC

Auxiliary contact composition 1 NO + 1 NC

Motor control

AC-3
AC-1

<= 300 V DC 25...400 Hz for power circuit

80 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit

37 kW at 380...400 V AC 50/60 Hz AC-3
45 kW at 660...690 V AC 50/60 Hz AC-3
45 kW at 415...440 V AC 50/60 Hz AC-3
55 kW at 500 V AC 50/60 Hz AC-3
45 kW at 1000 V AC 50/60 Hz AC-3
15 kW at 400 V AC 50/60 Hz AC-4

7.5 hp at 115 V AC 50/60 Hz for 1 phase motors
15 hp at 230/240 V AC 50/60 Hz for 1 phase motors
25 hp at 230/240 V AC 50/60 Hz for 3 phases motors
60 hp at 460/480 V AC 50/60 Hz for 3 phases motors
60 hp at 575/600 V AC 50/60 Hz for 3 phases motors

Sep 20, 2017

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

1

[Uimp] rated impulse withstand voltage Conforming to IEC 60947

Overvoltage category III

[Ith] conventional free air thermal
current

Irms rated making capacity 1100 A at 440 V for power circuit conforming to IEC 60947

Rated breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947

[Icw] rated short-time withstand current 135 A <= 40 °C 10 min power circuit

Associated fuse rating 160 A gG at <= 690 V coordination type 2 for power circuit

Average impedance 0.8 mOhm at 50 Hz - Ith 125 A for power circuit

[Ui] rated insulation voltage 1000 V for power circuit conforming to IEC 60947-4-1

Electrical durability 0.8 Mcycles 125 A AC-1 at Ue <= 440 V

Power dissipation per pole 5.1 W AC-3

Protective cover With

Mounting support Plate

Standards CSA C22.2 No 14

Product certifications DNV

Connections - terminals Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable

Tightening torque Power circuit : 9 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mm

Operating time 20...35 ms opening

125 A at <= 60 °C for power circuit
10 A at <= 60 °C for signalling circuit

140 A AC for signalling circuit conforming to IEC 60947-5-1
250 A DC for signalling circuit conforming to IEC 60947-5-1

100 A 1 s signalling circuit
120 A 500 ms signalling circuit
140 A 100 ms signalling circuit
640 A <= 40 °C 10 s power circuit
990 A <= 40 °C 1 s power circuit
320 A <= 40 °C 1 min power circuit

200 A gG at <= 690 V coordination type 1 for power circuit
10 A gG for signalling circuit conforming to IEC 60947-5-1

600 V for power circuit certifications CSA
600 V for power circuit certifications UL
690 V for signalling circuit conforming to IEC 60947-1
600 V for signalling circuit certifications CSA
600 V for signalling circuit certifications UL

1.5 Mcycles 80 A AC-3 at Ue <= 440 V

12.5 W AC-1

Rail

EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508

LROS (Lloyds register of shipping)
GL
CSA
UL
CCC
RINA
BV
GOST

end
Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable
end
Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable
end
Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end
Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end
Control circuit : screw clamp terminals 1 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable
end
Power circuit : connector 1 cable(s) 4...50 mm² - cable stiffness: flexible - without cable end
Power circuit : connector 2 cable(s) 4...25 mm² - cable stiffness: flexible - without cable end
Power circuit : connector 1 cable(s) 4...50 mm² - cable stiffness: flexible - with cable end
Power circuit : connector 2 cable(s) 4...16 mm² - cable stiffness: flexible - with cable end
Power circuit : connector 1 cable(s) 4...50 mm² - cable stiffness: solid - without cable end
Power circuit : connector 2 cable(s) 4...25 mm² - cable stiffness: solid - without cable end

Power circuit : 9 N.m - on connector hexagonal 4 mm
Control circuit : 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit : 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2

2

95...130 ms closing

Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1

Mechanical durability 4 Mcycles

Operating rate 3600 cyc/h at <= 60 °C

B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1

Complementary

Coil technology Without built-in suppressor module

Control circuit voltage limits 0.1...0.3 Uc drop-out at 55 °C, DC

Time constant 75 ms

Inrush power in W 22 W at 20 °C

Hold-in power consumption in W 22 W at 20 °C

Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1

Signalling circuit frequency 25...400 Hz

Minimum switching current 5 mA for signalling circuit

Minimum switching voltage 17 V for signalling circuit

Non-overlap time 1.5 ms on de-energisation (between NC and NO contact)

Insulation resistance > 10 MOhm for signalling circuit

Power range 15...25 kW 200...240 V 3 phases

Motor starter type Direct on-line contactor

Contactor coil voltage 24 V DC standard

0.85...1.1 Uc operational at 55 °C, DC

Type mirror contact (1 NC) conforming to IEC 60947-4-1

1.5 ms on energisation (between NC and NO contact)

30...50 kW 380...440 V 3 phases

30...50 kW 480...500 V 3 phases

55...100 kW 480...500 V 3 phases

Environment

IP degree of protection IP20 front face conforming to IEC 60529

Protective treatment TH conforming to IEC 60068-2-30

Pollution degree 3

Ambient air temperature for operation -5...60 °C

Ambient air temperature for storage -60...80 °C

Permissible ambient air temperature
around the device

Operating altitude 3000 m without derating in temperature

Fire resistance 850 °C conforming to IEC 60695-2-1

Flame retardance V1 conforming to UL 94

Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz

Height 127 mm

Width 85 mm

Depth 186 mm

Product weight 2.59 kg

-40...70 °C at Uc

Shocks contactor open 8 Gn for 11 ms
Vibrations contactor closed 3 Gn, 5...300 Hz
Shocks contactor closed 10 Gn for 11 ms

Offer Sustainability

Sustainable offer status Green Premium product

RoHS (date code: YYWW) Compliant - since 0706 - Schneider Electric declaration of conformity

Schneider Electric declaration of conformity

REACh Reference not containing SVHC above the threshold

Reference not containing SVHC above the threshold

Product environmental profile Available

3

Product environmental

Product end of life instructions Need no specific recycling operations

Contractual warranty

Warranty period 18 months

4

Product data sheet

LC1D80BD

Dimensions Drawings

Dimensions

(1) Minimum electrical clearance

LC1 D80 and D95

a 85

b1 with LAD 4BB3 –

with LA4 DF, DT –

c without cover or add-on blocks 181

with cover, without add-on blocks186

c1 with LAD N (1 contact) 204

with LAD N or C ( or 4 contacts)210

c2 with LA6 DK10 221

c3 with LAD T, R, S 229

with LAD T, R, S and sealing cover233

5

Product data sheet

Connections and Schema

Wiring

LC1D80BD

6

Product data sheet

LC1D80BD

Motor Starter BOM

Our Proposal - Type 1 : Circuit Breaker + Contactor for Motor Power 37 kW and 415 VAC

Motor power

(kW)

37 36

37 15

Non contractual pictures.

Type 1 coordination requires that in a short-circuit condition, the contactor or starter must not present any danger to personnel or installations and
must not be able to resume operation without repair or the replacement of parts.

ICU

(kA)

Breaker Contactor (*)

GV7RE80 LC1D80BD

GV3ME80 LC1D80BD

7