Page 1
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Product data sheet
Characteristics
LC1D258G7
TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 <= 440 V 40 A - 120 V AC coil
Oct 26, 2015
1
Page 2
Main
Range TeSys
Product name TeSys D
Product or component
type
Device short name LC1D
Contactor application Resistive load
Utilisation category AC-1
Poles description 4P
Power pole contact
composition
[Ue] rated operational
voltage
[Ie] rated operational
current
Control circuit type AC 50/60 Hz
Control circuit voltage 120 V AC 50/60 Hz
Auxiliary contact composition
[Uimp] rated impulse
withstand voltage
Overvoltage category III
[Ith] conventional free
air thermal current
Irms rated making capacity
Rated breaking capacity
[Icw] rated short-time
withstand current
Associated fuse rating 40 A gG at <= 690 V coordination type 2 for power
Average impedance 2 mOhm at 50 Hz - Ith 40 A for power circuit
[Ui] rated insulation
voltage
Electrical durability 1.4 Mcycles 40 A AC-1 at Ue <= 440 V
Power dissipation per
pole
Safety cover With
Mounting support Plate
Standards EN 60947-4-1
Contactor
2 NO + 2 NC
<= 300 V DC for power circuit
<= 690 V AC 25...400 Hz for power circuit
40 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit
1 NO + 1 NC
6 kV conforming to IEC 60947
40 A at <= 60 °C for power circuit
10 A at <= 60 °C for signalling circuit
450 A at 440 V for power circuit conforming to IEC
60947
250 A DC for signalling circuit conforming to IEC
60947-5-1
140 A AC for signalling circuit conforming to IEC
60947-5-1
450 A at 440 V for power circuit conforming to IEC
60947
140 A 100 ms signalling circuit
120 A 500 ms signalling circuit
100 A 1 s signalling circuit
120 A <= 40 °C 1 min power circuit
50 A <= 40 °C 10 min power circuit
380 A <= 40 °C 1 s power circuit
240 A <= 40 °C 10 s power circuit
circuit
63 A gG at <= 690 V coordination type 1 for power
circuit
10 A gG for signalling circuit conforming to IEC
60947-5-1
600 V for signalling circuit certifications UL
600 V for signalling circuit certifications CSA
690 V for signalling circuit conforming to IEC
60947-1
600 V for power circuit certifications UL
600 V for power circuit certifications CSA
690 V for power circuit conforming to IEC 60947-4-1
3.2 W AC-1
Rail
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
CSA C22.2 No 14
2
Page 3
Product certifications BV
Connections - terminals Power circuit : connector 2 cable(s) 2.5...16 mm² -
Tightening torque Power circuit : 1.8 N.m - on connector - with screw-
Operating time 4...19 ms opening
Safety reliability level B10d = 20000000 cycles contactor with mechanical
Mechanical durability 15 Mcycles
Operating rate 3600 cyc/h at <= 60 °C
CCC
CSA
DNV
GL
GOST
RINA
UL
LROS
cable stiffness: solid - without cable end
Power circuit : connector 1 cable(s) 2.5...16 mm² cable stiffness: solid - without cable end
Power circuit : connector 2 cable(s) 2.5...10 mm² cable stiffness: flexible - with cable end
Power circuit : connector 1 cable(s) 2.5...10 mm² cable stiffness: flexible - with cable end
Power circuit : connector 2 cable(s) 2.5...10 mm² cable stiffness: flexible - without cable end
Power circuit : connector 1 cable(s) 2.5...10 mm² cable stiffness: flexible - without cable end
Control circuit : screw clamp terminals 2 cable(s)
1...4 mm² - cable stiffness: solid - without cable end
Control circuit : screw clamp terminals 1 cable(s)
1...4 mm² - cable stiffness: solid - without cable end
Control circuit : screw clamp terminals 2 cable(s)
1...2.5 mm² - cable stiffness: flexible - with cable end
Control circuit : screw clamp terminals 1 cable(s)
1...4 mm² - cable stiffness: flexible - with cable end
Control circuit : screw clamp terminals 2 cable(s)
1...4 mm² - cable stiffness: flexible - without cable
end
Control circuit : screw clamp terminals 1 cable(s)
1...4 mm² - cable stiffness: flexible - without cable
end
driver Philips No 2
Power circuit : 1.8 N.m - on connector - with screwdriver flat Ø 6 mm
Control circuit : 1.7 N.m - on screw clamp terminals with screwdriver Philips No 2
Control circuit : 1.7 N.m - on screw clamp terminals with screwdriver flat Ø 6 mm
12...22 ms closing
load conforming to EN/ISO 13849-1
B10d = 1369863 cycles contactor with nominal load
conforming to EN/ISO 13849-1
Complementary
Coil technology Without built-in suppressor module
Control circuit voltage limits 0.85...1.1 Uc at 60 °C operational 60 Hz
0.8...1.1 Uc at 60 °C operational 50 Hz
0.3...0.6 Uc at 60 °C drop-out 50/60 Hz
Inrush power in VA 70 VA at 20 °C (cos ϕ 0.75) 50 Hz
70 VA at 20 °C (cos ϕ 0.75) 60 Hz
Hold-in power consumption in VA 7 VA at 20 °C (cos ϕ 0.3) 50 Hz
7.5 VA at 20 °C (cos ϕ 0.3) 60 Hz
Heat dissipation 2...3 W at 50/60 Hz
Auxiliary contacts type Type mirror contact (1 NC) conforming to IEC 60947-4-1
Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1
Signalling circuit frequency 25...400 Hz
Minimum switching current 5 mA for signalling circuit
Minimum switching voltage 17 V for signalling circuit
Non-overlap time 1.5 ms on energisation (between NC and NO contact)
1.5 ms on de-energisation (between NC and NO contact)
Insulation resistance > 10 MOhm for signalling circuit
3
Page 4
Environment
IP degree of protection IP2x front face conforming to IEC 60529
Protective treatment TH conforming to IEC 60068-2-30
Pollution degree 3
Ambient air temperature for operation -20...60 °C
Ambient air temperature for storage -60...80 °C
Permissible ambient air temperature around the device
Operating altitude 3000 m without derating in temperature
Fire resistance 850 °C conforming to IEC 60695-2-1
Flame retardance V1 conforming to UL 94
Mechanical robustness Shocks contactor open 8 Gn for 11 ms
Height 105 mm
Width 45 mm
Depth 99 mm
Product weight 0.425 kg
-40...70 °C at Uc
Shocks contactor closed 15 Gn for 11 ms
Vibrations contactor closed 4 Gn, 5...300 Hz
Vibrations contactor open 2 Gn, 5...300 Hz
Offer Sustainability
Sustainable offer status Green Premium product
RoHS (date code: YYWW)
REACh Reference not containing SVHC above the threshold
Product environmental profile
Product end of life instructions Need no specific recycling operations
Compliant - since 0702 - Schneider Electric declaration of conformity
Available Download Product Environmental
4
Loading...