Square Stand User Manual
Square Stand
Getting Staed
WHAT’S IN THE BOX
Let’s get you up and running. Everything you need to sta selling is in the box—just make sure you have your compatible iPad ready.
Square Reader
for contactless and chip
Dock for Square Reader Square Stand Power adapter cable
Power adapter USB hardware hub Drill mount
Adhesive mount
SETTING UP SQUARE STAND
Sta by connecting Square Stand to the hardware hub and power adapter. You can then connect your Square Reader and Dock to the hardware hub.
Connect Square Stand to
the hardware hub
The hardware hub has two
cables: one that connects to
the bottom of Square Stand
and one that connects to the
power adapter.
Connect the hardware
hub to the power adapter
Plug the hardware hub into
the power adapter, then
connect the power adapter
cable to the power adapter.
Plug into an outlet
Plug the power adapter cable
into a power outlet.
Slide Square Reader
into Dock
Remove the retainer clip
from Dock. Slide Square
Reader into Dock’s micro
USB connector. Replace
the retainer clip.
Plug in Dock
Plug Dock for Square Reader
into the hardware hub.
Learn how to connect other
accessories on the next page.
Insert your iPad into
Square Stand
Pull out the security pin on
the left side of Stand. Place
your iPad into Stand and
connect your iPad to the
Lightning connector. Push the
security pin into the headset
jack of your iPad to secure it
to Stand. Open the Square
app on your iPad, follow the
onscreen instructions, and
you’re ready to sta selling.
Loading...