SQT Electronics SM 367AG User Manual

The RF2.4GHz Optical mouse use one AA alkaline batteries.
The RF2.4GHz Optical keyboard use Built in lithium -ion rechargeable battery.

1:when you want use the mouse ,you can take out the receiver to computer by the
list step;

2:when you need stop the work or to travel, you can store the receiver on the mouse
for the moving by the list step.

The receiver is insert to USB port immediate,
or by a extra USB cable.

Nano re cei ver

USB por t

* This mouse is equipped with Traveling-Power-Save function.

When you are traveling with this mouse, the LED of the mouse will be switched off
automatically for the purpose of power-save, but the pre-condition is that the
receiver is disconnected with your notebook or PC.

Your optical 3D mouse is provide 1200 dpi .

* when your mouse no any clik or scroll or moving, the mouse will come to sleep
state for the economize after about 8 minutes, for the wake up, you can scroll the
wheel or click any button for this

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference
that may cause undesired operation.

DPI Sw itch

Model:SM-367AG

Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment

NOTE:

This equipment has been tested and found to comply with the limits for a ClassB
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF2.4GHz Auto-Link Optical Mouse